Frequent Questions

  • [FAQ] AM2754-Q1: Implementing Firmware Update Over Ethernet (ENETFOTA) on AM275x

    Part Number: AM2754-Q1 Other Parts Discussed in Thread: UNIFLASH , AUDIO-AM275-EVM The ENETFOTA example demonstrates how Ethernet can be used to transfer a new application image from a host PC to an AM275x device that is currently running an older application…

  • [FAQ] MSPM0 MCAN Application Demo - 20260408

    Part Number: MSPM0G3507 mcan_application_LP_MSPM0G3507_nortos_ticlang_20260408.zip Here is the mcan application demo code for user easily start to used MSPM0 mcan module. User can choose to use either fifo or buffer Tx/Rx, or combine Tx FIFO and…

  • [FAQ] Automotive 48V Rail Monitoring

    Part Number: TPS37100-Q1 Hi, Currently I'm using discrete approach to monitor the battery rail for overvoltage and undervoltage faults and I'd like to understand is there a single package solution, which can help solution cost and size? Best Regards…

  • [FAQ] AM13E23019: Is brownout reset supported on the AM13E230x devices and is it configurable?

    Part Number: AM13E23019 Hi experts, Is early brownout detection (with interrupt) possible? How to configure thresholds? "7.8.1 Power Management Unit (PMU): section in datasheet mentions "Brownout reset (BOR) supply monitor with early warning capability…

  • [FAQ] AM13E23019: AM13E230x: Issue with the sysconfig interface for timer configuration

    Part Number: AM13E23019 Other Parts Discussed in Thread: SYSCONFIG Hi experts, I wanted help with the Timer module configuration of the AM13E30x sysconfig. I open the example.syscfg and try to configure the timer, but notice the following issues:…

  • [FAQ] Help, my F280033/F280034 device won't boot to flash!

    Part Number: TMS320F280033 Other Parts Discussed in Thread: SYSCONFIG , UNIFLASH The default boot to flash entry point is 0x80000 in the F28003x Boot ROM, which is not in the memory map for the F280033/F280034 subset parts. This thread will detail how…

  • [FAQ] AM13E23019: List of FAQs for TI AM13E230x

    Part Number: AM13E23019 Other Parts Discussed in Thread: SYSCONFIG List of all FAQs for AM13E230x

  • [FAQ] AM5728: How to configure and verify MMU settings in SYS/BIOS on AM57xx

    Part Number: AM5728 How can we modify and verify MMU configurations in the SYS/BIOS .cfg file?

  • [FAQ] INA241 vs INA296: Selecting Devices with or without PWM Rejection

    Part Number: INA241A I am looking for a high voltage, precise current sense amplifier and both the INA241 and the INA296 families meet my design requirements. I see that the INA241 has a PWM reject feature like the INA750 and INA790. How do I decide…

  • [FAQ] C2000 Bootloading Design Considerations

    Other Parts Discussed in Thread: C2000WARE This thread will discuss the best practices for custom bootloading on the following devices: F2807x F2837xS F2837xD F28004x F2838x F28002x F28003x F280013x F280015x F28P65x F28P55x …

View FAQ threads
Recommended For You