Other Parts Discussed in Thread: INA168, TINA-TI
Hi TI team,
I need to know the delay between Vrs (voltage sampling of current sense resistor) to the output Vout.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Haim,
please see the settling time specifications of datasheet. And keep in mind that increasing the load from 125k to 301k will furtherly increase the settling time.
You could try to run a TINA-TI simulation.
Kai
Hello all,
I believe Kai gave a good answer. I will just add a Tina-TI file for your simulation needs.
Regards,
Cas