• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 68 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DEM-OPA-SO-1A: DEM-OPA-SO-1A

ABIN JD
Prodigy 20 points
Part Number: DEM-OPA-SO-1A

FOR EVAL BOARD  : DEM-OPA-SO-1A, WE REQUIRED BOM TO BE POPULATED ON THE PCB WITH SCHEMATICS, ASSEMBLY INSTRUCTIONS AND TESTING PROCEDURE AS PER DATA SHEET.

  • 0
    TI__Genius 11585 points

    Hello Abin,

    There is not an option to order the DEM-OPA-SO-1A EVM populated; the schematics, PCB layouts, and BOM present in the user guide for the DEM-OPA-SO-1A are sufficient to select and place your own components, appropriately sized and connected, onto the PCB.

    If you have specific questions about setting up the DEM-OPA-SO-1A for a certain amplifier or circuit configuration, please ask those questions as well.

    This EVM board was intentionally designed to be generic; the Altium source files also include generic resistors and capacitors as there is not a set use or behavior for this circuit.  It can be configured to suit the needs of your design.

    Please see the attached PDF for additional information on the PCB layout & BOM, though the information is very similar to what is made available on the DEM-OPA-SO-1A product page.

    DEM-OPA-SO-1A_e2e_aws_PCB.pdf

    Best,

    Alec