Texas Instruments (TI) Logic support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search logic IC content or ask technical support questions on everything from voltage level translation and transceivers to standard logic gates and specialty logic devices. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Other Parts Discussed in Thread: TPLD1201 FAQ: TPLD > Current FAQ
TPLD is programmed through our software tool, InterConnect Studio (ICS) , in combination with a TPLD programmer and EVM. TPLD programmers and EVMs can be found on the “Hardware development…
FAQ: TPLD > Current FAQ
No, current devices do not support in-system or inline programming (support is planned for future devices). For large scale production, we recommend you have TI program the devices before shipping. Customers can program devices…
FAQ: TPLD > Current FAQ
Customers can order devices for production through InterConnect Studio (ICS). TI can program devices (at no additional cost!) before shipping with the submitted design if the order quantity is one reel or more (3000 units). …
FAQ: TPLD > Current FAQ
TPLD uses Floating-Gate One-Time Programmable (OTP) technology to program its parts, as opposed to other Non-Volatile Memory techniques such as eFuses or AntiFuses, or Volatile Memory technologies such as EEPROM or RAM.
Floating…
FAQ: TPLD > Current FAQ
TPLD stands for TI Programmable Logic Devices . These devices are a family of programmable logic devices integrating multiple digital and analog functions into a single small package.
Top TI Programmable Logic FAQs
What is TPLD?
Does TPLD have memory? What kind of memory does TPLD use?
Can TI program TPLD for me?
Can a third party program TPLD for me?
Can I permanently program TPLD in-system or in production myself?
What…
Part Number: TXS0104V Other Parts Discussed in Thread: TXS0102 , TXS0102V
Tool/software:
The biggest difference between the two variants is the ESD protection with TXS-Type offering IEC-ESD protection on the 4-ch/8-ch and higher ESD protection than…
Part Number: SN74HCS08
Tool/software:
App Note: Optimizing Board Design for Supply Constrained Environments
Dual foot-printing packages is the practice of overlaying a package's layout on top of another package. This allows more flexibility in system…
Other Parts Discussed in Thread: LSF0101
FAQ: Logic and Voltage Translation > Auto-Bidirectional Level-Shifters > Current FAQ
In most cases, it is recommended to test with the device EVM instead as it yields much more accurate results under specific…
