• Threads 52529 Discussions
Texas Instruments (TI) Microcontrollers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search for content on other microcontrollers or ask technical support questions on the extensive portfolio of microcontrollers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM2612-Q1: How to use UniFlash CLI Tool

    Part Number: AM2612-Q1 Other Parts Discussed in Thread: UNIFLASH Hi expert, Please provide steps to flash AM261 using UniFlash CLI tool. Provide commands for relevant operations as well

  • [FAQ] MSPM33C321A: Reprogram NM on bank-swapped device may lead to device blocking

    Part Number: MSPM33C321A Other Parts Discussed in Thread: UNIFLASH , SYSCONFIG 1. Background For bank swap, what really swapped is the address of bank0 and bank1. However for MSPM33C321A, not only MAIN FLASH but also NONMAIN FLASH will swap the…

  • [FAQ] F29H859TU-Q1: Is it possible to write to CPU3 flash region from CPU1 in bank mode3. If so how to do this?

    Part Number: F29H859TU-Q1 Hi experts, Is it possible to write to CPU3 flash region from CPU1 in bank mode3. If so how to do this? Please provide example on how to do this.

  • [FAQ] F29H85X-SOM-EVM: How to flash two images into the same bank without them overwriting each other

    Part Number: F29H85X-SOM-EVM Hi expert, I want to flash two images into same banks. Suppose my bootloader is taking flash space from 0x1000_0000 to 0x1000_CFFF. The application is taking space from 0x1000_D000. When flashing app, boot is getting erased…

  • [FAQ] F29H859TU-Q1: How to Flash SSU Example in Bank Modes other than Bank Mode 0 and what is the significance of FOTA enable checkbox

    Part Number: F29H859TU-Q1 Hi expert, Can you please explain how to flash SSU examples in other bank modes. What is the FOTA enable checkbox and how is it requried here?

  • [FAQ] AM2634-Q1: How to debug applications without GEL Script and using SBL NULL

    Part Number: AM2634-Q1 Other Parts Discussed in Thread: UNIFLASH Hi expert, Can you explain the procedure to debug applications using SBL NULL

  • [FAQ] CCSTUDIO-THEIA: How to setup CCSTUDIO AI Assistant with Github Copilot

    Part Number: CCSTUDIO-THEIA Other Parts Discussed in Thread: CCSTUDIO I am trying to setup the CCSTUDIO AI Assitant with Github copilot using the guide here: Using GitHub Copilot Models with Claude Code in CCStudio™ IDE via LiteLLM I need further…

  • [FAQ] MSPM33C321A: How to modify NONMAIN flash on MSPM33

    Part Number: MSPM33C321A Other Parts Discussed in Thread: SYSCONFIG 0. Before Modifying NONMAIN If NONMAIN flash is erased unexpected, or not correctly programmed, it may lead to MCU lock and cannot be recovered forever. So please modify NONMAIN carefully…

  • [FAQ] MSPM33C321A: Workaround for re-use I2C pin as shutdown wakeup pin in usage 'Retaining IO State Through Bankswap'

    Part Number: MSPM33C321A Other Parts Discussed in Thread: SYSCONFIG 1. Background MSPM0/M33 support a method to retain IO state through bankswap( MSPM0/M33: Retaining IO State through Bankswap ). In this usage, shutdown wakeup will be used for BOR…

  • [FAQ] RM57L843: Effect of Different Reset Sources on RAM Contents

    Part Number: RM57L843 In this FAQ i want to demonstarate "Effect of Different Reset Sources on RAM Contents of RM57L843". Even though i tested for RM57x the same results should be applicable for other Hercules controllers like TMS570LCx, TMS570LSx…

View FAQ threads