Texas Instruments (TI) C2000™ microcontrollers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search C2000™ microcontroller content or ask technical support questions on our families of real-time control MCUs. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] FAQ: How do I use Simulink “Custom Code” blocks to measure code execution time on TI C2000?

    MathWorks' Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink. Simulink Coder’s Custom Code blocks are a key method to call custom…

  • [FAQ] IQMath

    Other Parts Discussed in Thread: C2000WARE This post addresses some common questions about the C2000 IQMath Library. The library is fully documented in the C2000Ware software package. Q: How do I change an IQmath project to a native floating-point project…

  • [FAQ] C2000 GPIO FAQ

    This post addresses commonly asked questions regarding the GPIO on F28x devices. Some information may have changed over time. Always refer to the latest Technical Reference Manual and datasheet for a particular device. Q: Can I read the state of the…

  • [FAQ] Common CSM and Flash Questions

    Sometimes a device may unexpectedly be locked. This FAQ addresses some common reasons.

  • [FAQ] DRV8353RS-EVM with InstaSPIN and MotorWare support

    Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: DRV8353RS-EVM , DRV8353 , MOTORWARE This is a solution to support the existing InstaSPIN enabled LaunchPad and MotorWare for DRV8353RS-EVM. DRV8353RS-EVM can be mounted on the LAUNCHXL…

  • [FAQ] TMDSCNCD280025C: F280025C controlCARD code hangs waiting for X1 to saturate

    Part Number: TMDSCNCD280025C Other Parts Discussed in Thread: C2000WARE , Hello, While running C2000Ware examples on my TMDSCNCD280025C controlCARD the software always hangs at the following line: What can I do to fix this? Regards, Cody

  • [FAQ] TI C2000 Device Programming Tools and Services

    Could you provide details of different TI and third party flash programming solutions for TI C2000 devices?

  • [FAQ] How do I add SYSCONFIG support (Pinmux and Peripheral Initialization) to an existing driverlib project?

    Other Parts Discussed in Thread: SYSCONFIG , C2000WARE How do I add PinMux tool support to an existing project? How do I add SysConfig (GUI) based peripheral initialization to an existing project? How do I add C2000 CLB Tool support to an existing…

  • [FAQ] : How can we improve the Flash tool performance?

    Other Parts Discussed in Thread: UNIFLASH Below are a few different things that you can try to improve the flashing performance when using TI's CCS On-chip Flash Plugin or UniFlash. a. Use a faster emulator like XDS200. Performance of this emulator…

  • [FAQ] Flash - How to modify an application from RAM configuration to Flash configuration?

    Other Parts Discussed in Thread: C2000WARE , UNIFLASH Could you list the procedure involved in modifying an application from RAM based configuration to Flash based configuration in simple steps?

View FAQ threads