• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 79 subscribers
  • Views 401 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP-FET：How to Connecting MSP-FET to eZ-FET Debug Probe (7P)

Kiyokazu Kitagawa
Prodigy 50 points
Part Number: MSP-FET


How to Connecting MSP-FET to eZ-FET Debug Probe (7P)

  • 0
    TI__Mastermind 39235 points

    Hi,

    I am not understanding this question. The MSP-FET and eZ-FET are both emulation development tools for MSP MCUs. Why you need to connect those two tools together?

    Best regards,

    Cash Hao

  • 0
    Guru 34453 points

    For updating eZ-FET firmware (without BSL) over 7 pin onboard SBW / JTAG connector with another master device (MSP-FET). 7P connector is covered by eZ-FET schematic inside slau647 (MSP Debuggers). Depending on eZ-FET version, on some it is marked as TP101-TP107.

    I guess that topic is not related to, how to connect MSP-FET to target device on LP (some LP's are with 7 pin jumper/connector for master/target connection/isolation). How to make this is covered by picture at bottom page 50 of slau647.

**Attention** This is a public forum