Texas Instruments (TI) Power management support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search power management IC content or ask technical support questions on everything from linear and DC/DC switching regulators to battery management and LED drivers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TPS65224-Q1: Driver examples

    Part Number: TPS65224-Q1 Other Parts Discussed in Thread: TPS65223 , TPS65224 , AM62P , SK-AM62P-LP Tool/software: For developing with TPS6522x PMIC (TPS65224(-Q1), TPS65223 (-Q1) , TPS65222 (-Q1) and TPS65221 (-Q1) ) drivers will be needed to handle…

  • [FAQ] BQ25820: How To Connect BQ25820 If Power Path Is Not Needed

    Part Number: BQ25820 Tool/software: If power path is not needed on BQ25820, remove the BATFET, connected Pin 32 (SYS) to Pin 33(VAC), leave Pin 15 (BATDRV) floating, and connect Pin 16 (BATSRC) to Pin18(VLSNS). Best Regards, Christian

  • [FAQ] BQ25750 and BQ25751: How To Connect The BQ25750 or BQ25751 IC If The Power Path Is Not Needed

    Part Number: BQ25751 Other Parts Discussed in Thread: BQ25750 , Tool/software: If the power path is not needed on the BQ25750 or BQ25751, remove the BATFETs, connected Pin 32 (SYS) to Pin 33(VAC), leave Pin 15 (BATDRV) floating, and connect Pin 16…

  • [FAQ] BQ25751: Schematic checklist

    Part Number: BQ25751 Other Parts Discussed in Thread: BQ25750 , Tool/software: Hello all, Here is the BQ25750 schematic and layout checklist. This can also be used for the BQ25751. BQ25750_Schematic_And_Layout_Checklist.pdf Best Regards, Chri…

  • [FAQ] TPS65224-Q1: Over and Under Voltage Fault Injection

    Part Number: TPS65224-Q1 Tool/software: This guide for undervoltage (UV) and overvoltage (OV) fault injection can be used for other devices as well. Before performing please make sure this will not break anything on the board and that the regulator can…

  • [FAQ] BQ4050: How to get started with CEDV gauges?

    Other Parts Discussed in Thread: GAUGEPARCAL , GPCCEDV Tool/software: How do I get started with CEDV gauges?

  • [FAQ] TPS3435-Q1: Output rise time specification (Connected as MCU_PORz input)

    Part Number: TPS3435-Q1 Other Parts Discussed in Thread: AM620-Q1 Tool/software: Hi Team, I have a customer using TPS3435CKHBDDDFRQ1 I could not find this OPN while searching. Can you please confirm this is a valid OPN. Customer is using pushpull…

  • [FAQ] What is the minimum difference between input voltage and LED (string) voltage for TPS922055 / TPS922054 / TPS922053 / TPS922052 to regulate the output current?

    Other Parts Discussed in Thread: TPS922052 , TPS922055 , TPS922054 , TPS922053 What is the minimum difference between input voltage and LED (string) voltage for TPS922055 / TPS922054 / TPS922053 / TPS922052 to regulate the output current?

  • [FAQ] BQ25883: BQ2588x FAQs

    Other Parts Discussed in Thread: BQ25882 , BQ25883 , BQ25886 , BQ25887 BQ2588x FAQ Home Page This home page is for common questions in relation to the BQ25882, BQ25883, BQ25886, and BQ25887. FAQs ----------------------------------------…

  • [FAQ] BQ25751EVM: BQZ

    Part Number: BQ25751EVM Other Parts Discussed in Thread: BQ25751 Tool/software: https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/Charger_5F00_1_5F00_00_2D00_bq25751.bqz

View FAQ threads