Texas Instruments (TI) Power management support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search power management IC content or ask technical support questions on everything from linear and DC/DC switching regulators to battery management and LED drivers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: BQ25600 Other Parts Discussed in Thread: BQ25601 Tool/software: The /QON pin has multiple functions on the BQ25601/D and BQ25600/D and is pulled up internally. The only thing connected to this pin should be some switch/FET/button etc. Float…
Part Number: BQ25600 Other Parts Discussed in Thread: BQ25606 , , BQ25601 Tool/software: When a fault occurs on BQ2560x (excluding BQ25606) an /INT pulse is sent to the host. For the BQ25601/D and BQ25600/C/D the fault statuses in REG0x09 are kept static…
Part Number: BQ25600 Other Parts Discussed in Thread: BQ25601 , Tool/software: The I2C programmable BQ2560x has a mode to minimize quiescent current for the BQ25601/D and BQ25600/C/D from the battery in cases when the system load is not needed to be powered…
Part Number: BQ25600 Tool/software: The BQ2560x TS pin (excluding BQ25600C) is used to monitor the battery temperature via a thermistor with a pull-up and pull-down resistor. As the two resistors represent two unknowns when designing the TS circuit, only…
Part Number: TPS2HCS08-Q1
Tool/software:
Introduction
For the Smart Fuse Configurator GUI package, updates were made in order to increase performance/reliability as well as add support for future roadmap devices. The idea here is that you can use…
Part Number: BQ76907 Other Parts Discussed in Thread: BQ76930 , BQ76942
Tool/software:
I want to use a battery monitor IC for 7 LFP cells in series. I came across these two ICs: BQ76907 and BQ76930/BQ76942. Looking from top level both of them seem…
