A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
AM3352: Is there any case using Am3352B + Phy(RMII mode)?
Please note that we do not provide Schematics review support over E2E,
Please reach out over email if you need to request schematics review.
With regards to the schematics you attached, i assume want to verify TI if the connections are made as required. Recommend using the sysconfig and the below documents. Please refer the below sections of listed documents. The FAQ below provides link to the listed documents.
Advisory 1.0.16 RMII: 50-MHz RMII Reference Clock Output Does Not Satisfy Clock Input Requirements of RMII Ethernet PHYs
Schematics checklist
2.14 Ethernet While no series resistors are required for MII/RMII/RGMII, it is prudent include zero-Ω stuff options for the TX and RX lines. Ideally, these option resistors should be as small as possible (0402 or smaller recommended) and should be placed as close to the transmitter as possible.
