Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: AM625
Tool/software:
Hi Ti Experts,
I am designing a custom board for the AM6254 SoC and trying to connect an SPI peripheral to the AM6254 SPI interface.
I intend to use MCU_SPI1 Channel but I am not sure which one is MISO and MOSI…
Part Number: TDA4AP-Q1
Tool/software:
Hi TI Experts,
Customer is working on TDA4AP SDK10.0. They are using SPL boot.
They want to change the De-emphasis to be -3.5dB for PCIe0 for 5.0GT/s to minimize reflection. Please see the below description…
I am using a processor with a DM R5F (AM62x, AM62Ax, AM62Px). I am using SDK 9.2.1 or SDK 10.0. The Device Manager (RM) R5F core is listed in the Linux devicetree, so Linux should use the remoteproc driver to attach to the DM R5F during Linux boot time…
Part Number: SK-AM69 Other Parts Discussed in Thread: SK-AM68 , AM67 , SK-TDA4VM
Tool/software:
Hi,
I have a Starter Kit (SK) Edge AI device with a CSI sensor connected and would like to stream to my display. I have enabled the sensor by following…
Part Number: AM625 Other Parts Discussed in Thread: AM623
Tool/software:
Hi TI,
I`d like to know the meaning of below parameter.
0.35, 0.25, 0.15, 0.08. What is the meaning of these 4 parameter?
BR
Cayden
Part Number: AM2432 Other Parts Discussed in Thread: AM6412 , AM6422 , AM6442 , AM2434
Tool/software:
Hi
At the document SPRACU5C "AM6442, AM6422, AM6412 and AM2434 Schematic Design and Review Checklist" ( link ), there is no description for FSI…
Part Number: AM62A3-Q1
Tool/software:
Hello，I have some doubts about PDN simulation (Power SI), please help to solve it
1、Do I need to separate VDD_CORE-1 to 17 for simulation, or use VDD_CORE as a Port?
2、Do I need to include the PMIC FB loop…
Part Number: AM6442 Other Parts Discussed in Thread: LP-AM243 , TMDS64EVM
Tool/software:
icECAT is a 3rd party EtherCAT Master stack developed by IBV .
To obtain the software stack for evaluation please send a request by selecting the "Send Request…
Part Number: AM6442
Tool/software:
TI processors have the capability to run as an EtherCAT MainDevice to control EtherCAT SubDevices such Beckhoff I/O terminals or an AM243x running an EtherCAT subdevice example .
This is enabled by using a 3rd…
