Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM6X: How Do I Fix Stream FIFO Overflow Errors in the CSI2RX Linux Driver with NUM_PIXELS?

    Part Number: AM69 Tool/software: There is a large amount of data being streamed to the CSI2RX, and the stream FIFOs are overflowing. How can I fix this issue?

  • [FAQ] TDA4VM: How to run app_multi_cam_demo with file based input

    Part Number: TDA4VM Tool/software: Run app_multi_cam_demo with capture node bypassed and raw input image is loaded from file.

  • [FAQ] TDA4VEN-Q1: How to enable, troubleshoot, and debug MCAN, CAN-FD interface not working in Linux

    Part Number: TDA4VEN-Q1 Other Parts Discussed in Thread: DRA821 Tool/software: The CAN interface is not working under Linux. How can I troubleshoot this?

  • [FAQ] PROCESSOR-SDK-AM62A: How to plot graph for OSPI Phy Tuning Algorithm?

    Part Number: PROCESSOR-SDK-AM62A Tool/software: Explanation: While running the OSPI Phy Tuning algorithm we tend to compute the Optimal Tuning Point(OTP). Under the file ospi_phy.c, we come across the API: OSPI_phyTuneGrapher The API OSPI_phyTuneGrapher…

  • [FAQ] AM623: Package's PAD/SMO information needed.

    Part Number: AM623 Tool/software: The following E2E FAQ includes very useful information, https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1203441/faq-am62a3-am62a3-q1-custom-board-hardware-design-collaterals-to-get-started…

  • [FAQ] J784S4XEVM: How to configure PSLC in eMMC

    Part Number: J784S4XEVM Tool/software: Hi Gokul, Can you help me with configuring PSLC in eMMC.

  • [FAQ] PROCESSOR-SDK-J721S2: How to enable second DSI instance on J721S2 device.

    Part Number: PROCESSOR-SDK-J721S2 Tool/software: J721S2 devices support two DSI outputs from Display subsystem. The first DSI output ie DSI0 is already supported in the processor SDK RTOS and this is available via DSI to DP convertor on the EVM. The second…

  • [FAQ] Boot Linux with 256MB DDR configurations on AM62L EVM

    Part Number: AM62L Tool/software: The FAQ is on how to configure DDR as 256MB to boot Linux on AM62L EVM

  • [FAQ] How to flash u-boot to GPMC-NAND with USB-DFU on AM62L

    Part Number: AM62L Tool/software: AM62L ROM supports boot from ONFI 1.0 compatible 8-bit parallel NAND memory of 2Gbytes or less in size connected to GPMC CS0 with the following geometries and features • 2Kbyte page and spare area of at least 64 bytes…

  • [FAQ] How to flash and boot u-boot from parallel GPMC NAND on AM62L

    Part Number: AM62L Tool/software: AM62L ROM supports boot from ONFI 1.0 compatible 8-bit parallel NAND memory of 2Gbytes or less in size connected to GPMC CS0 with the following geometries and features • 2Kbyte page and spare area of at least 64 bytes…

View FAQ threads
  • Threads 197919 Discussions