Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TDA4VM: I do not see CPSW5G/9G interface when booting up with Linux on J7200/J721E devices

    Part Number: TDA4VM I do not see the eth1 interface when booting up with Linux on J7200/J721E devices using SD Card, there is no output on 3rd Main UART instance as well where Ethernet Firmware output usually comes.

  • [FAQ] TDA4VM: Cddipc between mcu1_0(mcusw) and mcu2_1(mcusw) based on SDK v7.3

    Part Number: TDA4VM I am working on the integration of the Cddipc into AUTOSAR, which runs on MCU1_0 and MCU2_1. I want to achieve the IPC between MCU1_0(running AUTOSAR) and MCU2_1(also running AUTOSAR). My environment is as below: TDA4VM SDK…

  • [FAQ] TDA4VM: Cddipc between mcu1_0(mcusw) and mcu2_1(vision_apps) based on SDK v7.3

    Part Number: TDA4VM I am working on the integration of the Cddipc into AUTOSAR, which runs on MCU1_0. I want to achieve the IPC between MCU1_0(running AUTOSAR) and MCU2_1(running vision apps). My environment is as below: TDA4VM SDK V7.3 SPL…

  • [FAQ] TDA4VM Enable MCU_R5F lockstep using SPL and SBL

    Hi, Experts, We are using SDK7.03 version, and we want to enable MCU_R5F lockstep using SBL. I see in SBL that lockstep can be turned on only when it is SMP, how do we put the compiled SMP file? Please give me some guidance Regards, Xie

  • [FAQ] TDA4VM: How to use DSS M2M for format conversion?

    Part Number: TDA4VM Other Parts Discussed in Thread: TDA4VH Hi experts, We are using CSI_TX as the display output and setting the CSI_TX's date type as UYVY/YUYV. I have notice that both VPAC and vxColorConvertNode are not supported output image…

  • [FAQ] DRA829V: Do we have demo to support UDP communication with NDK/SYSBIOS?

    Part Number: DRA829V Other Parts Discussed in Thread: SYSBIOS , DRA829 , DRA821 Dear Expert. Customer wants to know if TI SDK provide UDP program demo which running on NDK/SYSBIOS? I try to search it in SDK, no result. Would you please help double…

  • [FAQ] TDA4VM: Efficient Way to provide Capture Data as input for Multiple Graphs

    Part Number: TDA4VM Hello, I have a use-case where I have 2 graph's which require Camera Image as an input. As there is a single camera node. What is the most efficient way to send this captured images as input to multiple graphs. Attaching one diagram…

  • [FAQ] AM5718: [PATCH] CPSW linux phy loopback self-test implementation

    Part Number: AM5718 Hello, I have implemented a phy loopback self-test procedure in ti-linux-kernel (branch=ti-rt-linux-5.4.y ; commit=3be7c8fa970782c88c2a188f7310ccc7256121f7) git repository for the drivers/net/ethernet/ti/cpsw.c driver. It is…

  • [FAQ] PROCESSOR-SDK-AM57X: How to boot from QSPI flash on AM57x.

    Part Number: PROCESSOR-SDK-AM57X Other Parts Discussed in Thread: UNIFLASH Hi Team, We need to boot from QSPI flash on AM571x, can you mention the steps required to do so.

  • [FAQ] AM335x: How to migrate to a different speed grade SoC in the existing product design with u-boot/Linux SW

    Part Number: AM3358 Other Parts Discussed in Thread: TPS65910 Hi, Linux Version: Linux 4.9.28 Uboot Version: U-Boot 2013.10 We are in process of evaluating partno AM3358BZCZA80 for our custom board which is based on AM3358BZCZA60 and it is clocked…

View FAQ threads
  • Threads 198424 Discussions