Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TDA2x: How To – Modify 512MB Bios Memory map to 1GB Bios Memory map in vision SDK?

    The steps are given in the "vision_sdk/docs/FeatureSpecificUserGuides/VisionSDK_UserGuide_MemoryMap.pdf"( chapter 6.5 How To – Modify 512MB Bios Memory map to 1GB Bios Memory map ) are not working in the latest SDK & not able to increase the "SR1_FRAME_BUFFER_SIZE…

  • [FAQ] TDA2x: How can I set the IPU1_0 as the Primary core in Vision SDK?

    Hi, By default primary core is IPU2 in vision-SDK(Bios) + Linux(A15), So what are the steps to set IPU1_0 as a primary core?

  • [FAQ] TDA4VM: How to get CPSW9G virtual interface functional on TDA4x/DRA8x SDK versions 7.0 onward?

    Part Number: TDA4VM When I build EthFw on SDK 7.0, I don't see the CPSW9G virtual interface on Linux coming up. This was functional in previous SDK 6.2. What changed in SDK 7.0?

  • [FAQ] TDA4VM: how to configure C7x DSP frequency to match different TDA4VM variant

    Part Number: TDA4VM Hi, expert: From clock tree tool, the MAIN_PLL7_HSDIV0_CLKOUT is 1000MHz for superset. But my customer is using a TDA4VM variant which C7x is supposed to run at 200MHz. Here are my questions: MAIN_PLL7_HSDIV0_CLKOUT: this…

  • [FAQ] CCS/TDA4VM: Pinmux Guide for Jacinto Processors

    Part Number: TDA4VM Other Parts Discussed in Thread: DRA829 , Tool/software: Code Composer Studio How to configure pinmux for peripherals using the below methods: 1) Pinmux tool. 2) Manually looking at the data sheet.

  • [FAQ] Why am I getting a build error with TI-RTOS (SYS/BIOS)?

    What are the common reasons for getting a build error with TI-RTOS (SYS/BIOS)?

  • [FAQ] PROCESSOR-SDK-DRA8X-TDA4X: OpenVX application hangs with pipelining

    Part Number: PROCESSOR-SDK-DRA8X-TDA4X My OpenVX application is hanging when pipelining with an OpenVX object array when calling vxGraphParameterDequeueDoneRef. The producer node is a replicated node that is outputting an element of an object array…

  • [FAQ] Yocto build error for recipe iso-codes in PSDKLA_07.00.00.04

    Hi, I am trying to build the Target file system in the new psdkla_07.00.00.04 yocto build. I am following the instructions from the psdkla user guide. But i am getting this build error . WARNING: iso-codes-4.4-r0 do_fetch: Failed to fetch URL git…

  • [FAQ] TMDX654GPEVM: mksdboot.sh of PROCESSOR-SDK-LINUX-AM65X 07_00_00_08 doesn't work

    Part Number: TMDX654GPEVM Hi, I downloaded the latest AM65x PROCESSOR-SDK-LINUX-AM65X 07_00_00_08 from software-dl.ti.com/.../ti-processor-sdk-linux-am65xx-evm-07_00_00_08-Linux-x86-Install.bin and installed. Then I tried to use /bin/mksdboot.sh to…

  • [FAQ] PROCESSOR-SDK-DRA8X-TDA4X: How to use eMMC based filesystem on PSDKQA release?

    Part Number: PROCESSOR-SDK-DRA8X-TDA4X The PSDKQA release(s) focus on filesystems on the SD card. How can an eMMC based filesystem be made accessible/used on a PSDKQA release?

View FAQ threads
  • Threads 198456 Discussions