Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM62x: U-Boot Build on SDK v8.06 fails with 'make[1]: arm-linux-androideabi-ld.gold: No such file or directory' error

    Part Number: AM625 Issue Symptoms When building U-Boot for A53 on AM62x using SDK v8.06, the build may break with the following error message: arm-linux-androideabi-ld.gold -r -b binary common/avb_pubkey -o common/avb_pubkey.o make[1]: arm-linux…

  • [FAQ] TDA4VM: Explain why VRING_BASE_ADDRESS = 0xAA000000 and IPC_VRING_BUFFER_SIZE = 0x1C00000U.

    Part Number: TDA4VM Hello, Is the address be fixed to a specific value per SOM? My understanding is that we can define it anywhere, the only constraint is just to make sure it's accessable from all cores, non cachable, and configured the same…

  • [FAQ] AM625: How to boot from R5 U-Boot SPL directly into the Linux Kernel, skipping A53 SPL and A53 U-Boot (Falcon Mode)

    Part Number: AM625 (also applicable to other AM62x, AM62Ax, AM64x, AM65x parts with minor changes) Overview In order to optimize boot time, complexity, and storage space requirements it may be desirable to optimize the usual TI AM6x based boot flow…

  • [FAQ] AM625: Is Flutter the right GUI toolkit for me: an engineers perspective.

    Part Number: AM625 Other Parts Discussed in Thread: SK-AM62 In today’s world, people tend to spend more time interacting with machines through a display screen rather than controlling them mechanically. For example, in automotive vehicles or home appliances…

  • [FAQ] A53 boot binary (tispl.bin) loading error when BOOTMODE[7]="0" in eMMC boot mode on AM62A

    Part Number: PROCESSOR-SDK-AM62A AM62A boot-rom support on booting R5-SPL/SBL from eMMC is described in Chapter 5 Initialization of AM62Ax TRM It is summarized in the table below. Note that booting from eMMC boot partition with BOOTMODE[6:3] = 1001…

  • [FAQ] AM62A7 / AM62A3 / AM62A1-Q1 / AM62D-Q1 Custom board hardware design – Processor DDR Subsystem and Device Register configuration

    Other Parts Discussed in Thread: AM62P , AM625 , AM623 , AM625-Q1 , AM62P-Q1 , SYSCONFIG Hi TI Experts, Could you explain the configurations that are required to be done for the below use cases? Device used in the EVM is used. A new functionally…

  • [FAQ] TDA4VM: How to print the ALE table for CPSW in TDA4/DRA8 devices

    Part Number: TDA4VM Other Parts Discussed in Thread: DRA821 , , TDA4VH , DRA829 Are there any tools available for printing ALE for the different ethernet applications with enet LLD, ethfw and Native Linux Driver?

  • [FAQ] A53 boot binary (tispl.bin) loading error when BOOTMODE[7]="0" in eMMC boot mode on AM62x

    AM62x boot-rom support on booting R5-SPL/SBL from eMMC is described in Chapter 5 Initialization of AM62x TRM It is summarized in the table below. Note that booting from eMMC boot partition with BOOTMODE[6:3] = 1001, BOOTMODE[7] is n/a . eMMC…

  • [FAQ] Sitara multicore development and documentation

    I am using an AM62x, AM62Ax, AM62Px, or AM64x. Where can I find documentation about developing software on multiple cores at once? For example, RTOS M4F & Linux A53? We are actively writing new multicore development documentation. We often publish…

  • [FAQ] AM62A7 / AM62A3 / AM62A1-Q1 / AM62D-Q1 Custom board hardware design - Reusing TI SK (EVM) design files

    Part Number: AM62A7 Other Parts Discussed in Thread: AM62D-Q1 Hi TI Experts, I am starting a new board design and planning to use TI EVM design files for designing my custom board. Please let me know if you have any suggestions.

View FAQ threads
  • Threads 198176 Discussions