Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] OSPI FAQ for Sitara/Jacinto devices

    FAQ Contents There are a variety of NOR and NAND based flash parts available that can make choosing a flash memory for a design challenging; picking a flash to use for booting can be particularly challenging due to the lack of software control or flexibility…

  • [FAQ] TMS320C6678: How to build and run the IPC-SRIO example on C6678 EVM?

    Part Number: TMS320C6678 Hi, How to build and run the IPC-SRIO example on C6678 EVM? with Processor SDK 6.3 and CCS 9.3 ?

  • [FAQ] 66AK2E05: How to build and run the platform test on K2E EVM ?

    Part Number: 66AK2E05 Hi, How to build and run the platform test on K2E EVM ?

  • [FAQ] 66AK2H12: How to build and run the platform test on K2H EVM ?

    Part Number: 66AK2H12 Hi, How to build and run the platform test on K2H EVM ?

  • [FAQ] AM623: clock outputs

    Part Number: AM623 We are planning to use these 3 clocks output from the AM62 SOC - CLKOUT0, to the RGMII Ethernet PHY (25MHz) - WKUP_CLKOUT0, to be used as a the master clock for a MIPI-CSI camera (typically 25MHz) - AUDIO_EXT_REFCLK1 as the master…

  • [FAQ] 66AK2H12: How to flash U-Boot and Linux kernel using Shell Scripts in Processor SDK Linux

    Part Number: 66AK2H12 How to flash U-Boot and Linux kernel using Shell Scripts in Processor SDK Linux in 66AK2H12 ?

  • [FAQ] SK-TDA4VM: How do I connect the external debugger Blackhawk USB560v2 (XDS560v2) USB System Trace to the JTAG on the board?

    Part Number: SK-TDA4VM Other Parts Discussed in Thread: TDA4VM , DRA829 The SK-TDA4VM does not have an on-board debugger like the J721E EVM. How can I connect debugger to JTAG to debug remote cores?

  • [FAQ] Linux: How to boot Sitara AM3x/AM4x/AM6x devices from initramfs (.cpio Archive, RAM Disk)

    Part Number: AM335x, AM437x, AM62x, AM62Ax, AM64x, AM65x Overview The TI SDK Yocto build environment common for all Sitara MPUs such as AM335x, AM437x, AM62x, AM62Ax, AM64x, and AM65x can be used to generate "tiny" images (via bitbake tisdk-tiny-image…

  • [FAQ] TDA4VM/TDA4VH/TDA4VL: Is HSFOSC1 external clock required

    Other Parts Discussed in Thread: TDA4VM , TDA4VL , TDA4VH , DRA829 Part Numbers: TDA4VM/TDA4VH/TDA4VL Referencing TRM DRA829/TDA4VM Technical Reference Manual (Rev. C) SPRUIL1C the below table can be seen. Is the external clock for HFOSC1_CLK required…

  • [FAQ] TDA4VM: How to browse memory using CCS while running Linux

    Part Number: TDA4VM This FAQ explains how to browse memory using CCS memory browser while Linux is running on A72 without halting the A72 core.

View FAQ threads
  • Threads 198390 Discussions