Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM5748: AM57XX: MPU COUNTER_REALTIME saturates after several hundred days

    Part Number: AM5748 The errata document: https://www.ti.com/lit/er/sprz429m/sprz429m.pdf?ts=1633078446981&ref_url=https%253A%252F%252Fwww.google.com%252F describes errata: i940 After several hundred days (specific duration depends on the primary input…

  • [FAQ] TDA4VM: J721e/J7200: Enabling DFU Boot on 8.0 Linux SDK

    Part Number: TDA4VM Currently DFU boot mode is broken on 8.0 Linux SDK. Please share the fixes for enabling it.

  • [FAQ] AM3359: How do I create a CCS project for my application which will be built on top of the PDK from Processor SDK RTOS

    Part Number: AM3359 Other Parts Discussed in Thread: OMAP-L138 , I'm developing my application on top of the PDK from the Processor SDK RTOS. How do I create a CCS project for my application integrating the PDK components?

  • [FAQ] TMS320C6657: How to generate the CCS PDK examples for C6657?

    Part Number: TMS320C6657 Hi, I would like to know the list of examples available for C6657 and like to generate them. In the processor SDK, the steps to create CCS PDK examples for C6657 are more generic for the series of processors. Please provide…

  • [FAQ] 66AK2E05: How to generate the CCS PDK examples for K2E?

    Part Number: 66AK2E05 Hi, In the processor SDK, the steps to create CCS PDK examples are more generic. I would like to know the list of examples available for K2E and like to generate them. Please provide the steps.

  • [FAQ] How do I create a SYS/BIOS based CCS project for AM335x/AM437x Cortex A8/A9 core?

    Part Number: AM3359 I need to build a CCS project using SYS/BIOS for AM335x/AM437x devices. How can I get started?

  • [FAQ] TDA4VM: How to move DMPAC to mcu2_0 or other R5F core?

    Part Number: TDA4VM In the PSDKRA, DMPAC is allocated to the core mcu2_1. This article explains how it can be moved to other R5F core, by providing an example of moving it to mcu2_0.

  • [FAQ] J721EXSOMXEVM: How to change Linux kernel page size from default 64K in the SDK to 4K?

    Part Number: J721EXSOMXEVM Hi, support team My customer has the questions as follow: for sdk download form www.ti.com/.../PROCESSOR-SDK-LINUX-J721E I found kernel config board-support/linux-5.4.106+gitAUTOINC+023faefa70-g023faefa70/arch/arm64…

  • [FAQ] AM6548: CTRLMMR_WKUP_JTAGID register value for SR2.1

    Part Number: AM6548 Section "1.6 Device Identification" in the TRM describes the CTRLMMR_WKUP_JTAGID register values for SR1.0 and SR2.0, but not for SR2.1. What is the CTRLMMR_WKUP_JTAGID register value for SR2.1? Is it the same as SR2.0? Best…

  • [FAQ] TDA4VM: How to provide different set of parameters in replicated node, like two look up table for LDC module

    Part Number: TDA4VM When a node is replicated in the OpenVX, the parameters passed to the node instance0 will reused for all the replicated node. Typically only input and/our output images are replicated in application to provide different instance of…

View FAQ threads
  • Threads 197827 Discussions