• State TI Thinks Resolved
  • Locked Locked
  • Replies 13 replies
  • Answers 4 answers
  • Subscribers 29 subscribers
  • Views 510 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST-ODS: Matlab error

May
Genius 9880 points
Part Number: AWR1642BOOST-ODS

Hi,

Customer have encountered error using the matlab using the AWR1642BOOST-ODS.

Followed the recommendation in E2E, the customer still encountered the problem:
https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/901594/compiler-awr1642boost-ods-multi-gesture-project-mss-rebuild-problem
https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/866855/awr1843boost-error-mmwdemodss-unable-to-open-the-adcbuf-driver

"I have modified dss_main.c But the matlab still same error

28(1).docx

"

Thank you in advance.

Regards,
Maynard

  • 0
    TI__Guru*** 148334 points

    Hi,

    Please try first to follow the steps provided in Slides 15-18 to flash on the board the pre-built binaries

    mmwave_automotive_toolbox_2_7_1\labs\lab0009_multi-gesture-16xx\docs\multi-gesture_16xx_user_guide.pdf

    To run the matlab gui, please install the Matlab Runtime library version documented in

    mmwave_automotive_toolbox_2_7_1\labs\lab0009_multi-gesture-16xx\gui\readme.txt

    Thank you

    Cesar

  • 0 in reply to Cesar
    TI__Genius 9880 points

    Hi Cesar,

    Just received response from customer, please see details below.

    i have try in 2_7_1 that is same error for maltab.error_2_7_1.docx

    Regards,
    Maynard

  • 0 in reply to May
    TI__Guru*** 148334 points

    Hi,

    As I mentioned in the previous post,

    Cesar said:
    Please try first to follow the steps provided in Slides 15-18 to flash on the board the pre-built binaries

    It seems that the customer is trying to use CCS. He can do that later but first please ask him to flash the binaries

    thank you

    Cesar

  • 0 in reply to Cesar
    TI__Genius 9880 points

    Hi Cesar,

    According to customer, they still encountered the error (cant open the gui) after following the steps above.

    10_Jan_2022.docx

    Regards,
    Maynard

  • 0 in reply to May
    TI__Guru*** 148334 points

    Hi,

    I checked the demo documentation and it seems that there are no instructions to run the GUI. I apologize for that.

    I have found the instructions to run the gui in the following file in the gui folder

    lab0009_multi-gesture-16xx\gui\readme.txt

    Here is an example

    Gesture_Feature_Plot.exe 'AWR1642ODS' <auxiliary COM port>

    Gesture_Feature_Plot.exe 'AWR1642ODS' 17

    Please ask the customer to try this

    Thank you

    Cesar

  • 0 in reply to Cesar
    TI__Genius 9880 points

    Hi Cesar,

    Just received response from customer, please see details below.

    what is the meaning of this command .
    Command to run this tool
    1. Gesture_Feature_Plot.exe 'AWR1642ODS' <auxiliary COM port>
    e.g. Gesture_Feature_Plot.exe 'AWR1642ODS' 17

    I have try inside all code. Please refer to attached file.

    11_Jan_2022.docx

    Regards,
    May

  • 0 in reply to May
    TI__Guru*** 148334 points

    Hi,

    Here are some steps that may help

    1) After powering up the EVM and connecting it through the USB cable to the PC, open on the PC the device Manager and check the value of the COM "Data Port"

    2) Open a DOS cmd window in the folder

    mmwave_automotive_toolbox_3_3_0\labs\lab0009_multi-gesture-16xx\gui

    3)In the cmd window type: Gesture_Feature_Plot.exe 'AWR1642ODS' Data_Port_COM

    For example, if the Data_Port_COM is 8

    Gesture_Feature_Plot.exe 'AWR1642ODS' 8

    Thank you

    Cesar

  • 0 in reply to Cesar
    TI__Genius 9880 points

    Hi Cesar,

    Just received response from customer, please see details below.

    I have open the gui but the surface is differece between guide document .please see my attach file.13_Jan_2021.docx

    Thank you in advance.

    Regards,
    Maynard

  • 0 in reply to May
    TI__Guru*** 148334 points

    Hi,

    This GUI looks correct

    thank you

    Cesar

  • 0 in reply to Cesar
    TI__Genius 9880 points

    HI Cesar,

    Thank you, is there guideline on how to use the GUI ?

    I can only find this link: https://dev.ti.com/tirex/explore/node?node=AAO2kq09tgMBw5AZc6dpkg__AocYeEd__LATEST

    Thank you in advance.

    Regards,
    Maynard

  • 0 in reply to May
    TI__Guru*** 148334 points

    Hi,

    I reviewed the documentation and it seems that for this demo the GUI is only needed for additional information. It is not needed to run the demo. This may be the reason why it was not well documented. I apologize, I am not very familiar with this demo.

    As described in the documentation - Slide 28, one needs to open a serial terminal and the gesture when detected will be displayed on the serial terminal.

    Please ask the customer to try that

    thank you
    Cesar

  • 0 in reply to Cesar
    TI__Genius 9880 points

    Hi Cesar,

    Just received response from customer.

    Customer tried using the terminal but no data can be seen. PLease see details below.

    Please see my attcha file. the GUI is difference between the doucument . 6724.19_Jan_2021.docx

    Thank you in advance.

    Regards,
    Maynard

  • 0 in reply to May
    TI__Guru*** 148334 points

    Hi,

    The customer should follow the directions in the demo user guide (slide 28) and open a serial terminal for the Data COM Port.

    The matlab gui should not be used. It was only provided for debug.

    I have run the demo today with no problems. Here are some notes.

    Thank you

    Cesare2e_1065605.pdf