Texas Instruments (TI) Switches & multiplexers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search switches & multiplexers IC content or ask technical support questions on everything from analog and protocol-specific switches/multiplexers (muxes) to power switches, encoders and decoders. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
TI devices typically have a code printed or etched on their top side that contains information about what device it is, when it was manufactured, and where it was manufactured. This code is referred to by a few names such as top marking, top side marking…
Some TI switches and multiplexers have orderable part numbers labelled with an E4/G4/G3 suffix. There is no difference between a device labeled with an E4/G4/G3 suffix and one without the label. TI.com highlights this in the ordering & quality section…
Other Parts Discussed in Thread: TMUX646 When looking for an analog switch / multiplexer for LVDS (Low-Voltage Differential Signaling) applications, it is import to understand the specifications of the LVDS standard (TIA/EIA-644):
2-wire differential…
Inter-IC Sound (I2S) is an electrical serial bus standard used for interfacing between digital audio devices. When looking for an I2S analog switch / multiplexer it’s important to understand the specifications of the I2S standard.
3-wire push-pull…
Other Parts Discussed in Thread: TMUX1136 , TMUX6136 , TMUX1109 , TMUX1308 , TMUX8108 , MUX36S16 Application Overview:
A very common, but very powerful use of a multiplexer is for applications in which there is a need for more GPIO pins for expanded…
Other Parts Discussed in Thread: TMUX1574 , TMUX1575 , TS3A27518E , TMUX646 TI signal switches and multiplexers can be used for JTAG (Joint Test Action Group) applications, but a few things need to be considered before selecting a device. The most important…
It is not always necessary to use every pin that may be present on a TI signal switch or multiplexer, but what to do with the unused pins can often cause some confusion. In this FAQ, we will explore all the possible scenarios for each type of pin and…
Other Parts Discussed in Thread: TS5A3160 , TS5A3154 , TS5A23160 TI switches and multiplexers datasheets often include a plethora of different timing characteristics that help define exactly how each device will behave transiently under a certain set…
TI offers a wide range of automotive rated signal switches and multiplexers. This flyer is a quick snapshot of some of our most popular devices.
A downloadable version of the flyer with links to product folders and relevant content can be found…
Other Parts Discussed in Thread: TMUX1574 The quick answer is that the V IH (Voltage Input High) and V IL (Voltage Input Low) are the voltages recommended to be applied on the control inputs of the multiplexer for achieving a logic high and logic low…
