Texas Instruments (TI) Simulation, hardware & system design tools support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search through answers related to design tools & simulation, hardware kits & boards, and reference designs or ask technical support questions on everything from Webench® Power Designer to active filter design. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] PSPICE-FOR-TI: How can I add all the PSpice for TI model libraries to the commercial version of PSpice/SPB/Orcad?

    Part Number: PSPICE-FOR-TI I have the full version of Cadence and I would like to use the TI models without adding them manually. How can I do this?

  • [FAQ] PSPICE-FOR-TI: Where do I find the installation log, cdsPspiceTIlog.txt?

    Part Number: PSPICE-FOR-TI When troubleshooting problems with PSpice for TI or TI-developed PSpice models, we may need certain log files. The file locations are often determined by Microsoft Windows environment variables such as "HOME" and "APPDATA"…

  • [FAQ] PSPICE-FOR-TI: My simulation fails to converge and says "INFO(ORPSIM-16594): To improve Pseudotransient Convergence and Performance, set following options: PTRANABSTOL=1e-5, PTRANVNTOL=1e-4"?

    Part Number: PSPICE-FOR-TI Also, How do I add additional options to the simulation profile in PSpice for TI? The following steps may resolve convergence errors if you see the message above: INFO(ORPSIM-16594): To improve Pseudotransient Convergence and…

  • [FAQ] PSPICE-FOR-TI: How do I use my own diode (BJT, MOSFET ...) model for the breakout part in PSpice for TI?

    Part Number: PSPICE-FOR-TI PSpice for TI provides symbols for SPICE primitives such as BJT, MOSFET and DIODE. A generic model is provided but you can modify them to use your own device models. Here is an example. Instantiate the part DbreakZ. It will…

  • [FAQ] PSPICE-FOR-TI: What information is needed for troubleshooting?

    The necessary information depends on the scenario. If you have a problem with installation, please share the installation log. Instructions can be found here If you have successfully installed PSpice for TI, and you now have a licensing error, please check…

  • [FAQ] PSPICE-FOR-TI: I already have the full commercial version of Cadence SPB/PSpice/OrCAD/Allegro. Can I still run PSpice for TI?

    Part Number: PSPICE-FOR-TI You can install PSpice for TI and other Cadence Allegro products on the same computer, as long as they are all installed into separate directories. If you have multiple Allegro products, you might have used the switch release…

  • [FAQ] PSPICE-FOR-TI: Install and Use PSpice for TI

    Part Number: PSPICE-FOR-TI This FAQ covers various topics related to obtaining and using PSpice for TI. Licensing Does PSpice for TI need a license to run? Will my PSpice for TI license expire? Are there limitations to the number of licenses I can hold…

  • [FAQ] PSPICE-FOR-TI: Can I define my own model in PSpice for TI?

    Part Number: PSPICE-FOR-TI I use a few MOSFET but there're no models for them. Is there a generic model that I can adjust parameters to fit the datasheet?

  • [FAQ] PSPICE-FOR-TI: I cannot install PSpice for TI. The error message says "An Internal error occurred" (-8) or (-12)

    Part Number: PSPICE-FOR-TI This only applies to error codes -8 or -12 When trying to install PSpice for TI using my access key, I got the following message: What does this mean?

  • [FAQ] PSPICE-FOR-TI: I cannot install PSpice for TI. The error message says "the required files cannot be read from the server".

    Part Number: PSPICE-FOR-TI When trying to install PSpice for TI using my access key, I got the following message:

View FAQ threads