How to edit the linker.cmd file to add new sections in TCM and how to add the application code into these TCM sections for faster code execution?

Part Number: ISO1640 Other Parts Discussed in Thread: ISO1641 Why are the maximum load capacitance and load current ratings for Side 1 of the ISO1640/ISO1641 less than Side 2?

Part Number: AM625 Hello, I am using the AM62 SK eva kit with PROCESSOR-SDK-LINUX-AM62 08.04.01.03 As I understand MAIN_UART1 and WKUP_UART0 is used by the DM and TIFS firmware. This is the configuration MAIN_UART0: Used for Linux and U-Boot…

Hello, do you have a list of all of the available Isolated Data Converter Collateral?

FAQ: Logic and Voltage Translation > Logic Technology >> Current FAQ Definition: A buffered CMOS device has output characteristics that only relies on the logical output of the gate. In a NOR gate, different input values can result in the same output…

Part Number: AM625 Other Parts Discussed in Thread: SK-AM62 Hi everybody , customer would like to have Jtag connections/capabilities on their production board . I suggested to copy SK-AM62 but here are questions : - do you need to implement…

Part Number: CC2652R Other Parts Discussed in Thread: CC2640R2F SysTick can be used to achieve time tracking with 20.833 ns accuracy (i.e. same accuracy as the System Clock). More details, such as API description can be found here . The code below…

There are several different tools available in a Linux environment to read and write registers on a TI PHY. Several of these options are listed below. MII read: This is the only command which can and must be used in U-boot. Stop the autoboot process…

Part Number: AM625 We are facing problem when connecting a SPI Nor (W25Q128VEIQ) to OSPI CS0. Basically it is working but from time to time it comes to errors during SF PROBE command in u.boot. Please find attached the CLK Signal measured during…

Part Number: DP83TC812S-Q1 For DP83TC812S/R and DP83TC814-Q1 if clkout pin is not being used to provide a clock signal to another component, then it is recommended to shut down this clock output and reduce its impact on EM emissions. Clkout's output…