Part Number: ESDS552 Tool/software: Question on ESDS552DBZR part
Below id my understanding on pin mapping
PNI-1 SIGNAL1
PIN-2 SIGNAL2
PIN-3 GND
Can I leave PIN2 as unconnected / NC in the schematics? If no, what is recommended. Mine is single…
Part Number: THVD1552 Other Parts Discussed in Thread: ESDS552 , Tool/software: Hello TI Team,
i want to design an external ESD protection for RS485 communication.
I'm using the THVD1552D which has an internal ESD protection circuit according to the…
Part Number: TMUX7236 Other Parts Discussed in Thread: ESDS552 , TMUX7462F Tool/software: Hello all,
I'm currently implementing the TMUX7236 in a design that should be able to switch between AI/RS485. I would like to protect this line from over/under…
Part Number: MAX232E Other Parts Discussed in Thread: ESDS552 , ESD652 Tool/software: I'm searching for a practical design guide especially for robust isolated interface, power distribution and grounding/shielding/chassis mounting within an embedded system…
Part Number: SN65HVD1781-Q1 Other Parts Discussed in Thread: ESDS552 Tool/software: Hi Team,
We are currently operating our RS-485 bus at 3.3 V and would like to clarify the following regarding the reserved, unpopulated pull-up and pull-down resistors…
Part Number: ESDS452-Q1 Other Parts Discussed in Thread: ESDS552 , ADS1261 , ESDS452 Tool/software: This TVS diode array is drawn as two separate bidirectional TVS diodes in the datasheet:
The working voltage is +-5.5v, so I'd expect IO channel 1…
Part Number: TSM24CA Other Parts Discussed in Thread: ESDS552 , ESD761
Hello
I am looking for an alternative to the PESD0402-140, I found that the TSM24CA may be a good option (matching the 40Vclamping and bidirectional protection, and coming in way…
Part Number: ISO3088 Other Parts Discussed in Thread: ESDS552 , LMR16030 , TSD05C Tool/software: HI Dan kisling
i have a question for you.
As you said adding one more TVS to the line will helps to conduct the High current surge( considering 1KV 42Ohm…
Part Number: THVD1400 Other Parts Discussed in Thread: ESDS452 , ESDS552 , TSD05 Tool/software: Hello E2E Community,
We are using THVD1400 for our RS485 use case with a maximum data rate of 20kbps. The maximum trace lengths on the PCB from THVD to MCU…
