Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 29 subscribers
  • Views 1152 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] TAS2562: [FAQ] Low Power Audio Speaker Amplifier FAQs

Ore Ogundana
Expert 6475 points
Part Number: TAS2562

[FAQ] PUREPATHCONSOLE: Audio Software Access Request

[FAQ] TAS2563: Adjusting Digital Volume Control using I2C

[FAQ] TAS2563, TAS2562, TAS2557, TAS2770 Android/Linux Drivers Link

[FAQ] PUREPATHCONSOLE: PurePath Console 3 gets stuck while initializing the device

[FAQ] TAS2563: PDM Interface

[FAQ] TAS2563: What are the .ftcfg, .cfg, .h, .json, and .bin files used for in End System Integration?

[FAQ] TAS2505: Protection Flags and Interrupts

[FAQ] TAS2505-Q1: How to configure TAS2505/TAS2505-Q1 EQ biquads

[FAQ] TAS2563: How to use external boost PVDD voltage

[FAQ] TAS2563: PDM 接口

[FAQ] TAS2563: How can I verify the excursion and thermal protections are function properly?

[FAQ] TAS2563: How can I read the resistance of the speaker, Re, from the devices registers?

[FAQ] TAS2563: I2C & SPI Setup (Not via USB)

[FAQ] TAS2563: Speaker cannot heat up properly during thermal characterization

[FAQ] TAS2563: Gain Control of Smart Amps in PPC3

[FAQ] TAS2563: What Tuning Tools are Available for TAS2563 in PPC3

[FAQ] TAS2563: How do use external PVDD to power the amplifier

[FAQ] TAS2770: Can the device drive DC output?

[FAQ] TAS2563: Component Selection Start Guide

[FAQ] [参考译文] [FAQ] TAS2563：PDM 界面

[FAQ] [参考译文] [常见问题解答] TAS2563：I2C &amp；SPI 设置(不通过 USB)