Texas Instruments (TI) C2000™ microcontrollers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search C2000™ microcontroller content or ask technical support questions on our families of real-time control MCUs. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] FAQ: How can I use a two model approach in MathWorks Embedded Coder for signal logging and parameter tuning on a TI C2000?

    MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink. This is the fastest way to log data in realtime. In the two model…

  • [FAQ] FAQ: What are the supported data types when designing a Simulink application for TI C2000?

    MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink. Texas Instruments C2000™ MCUs support 16-bit and 32-bit data types…

  • [FAQ] FAQ: How do I use MathWorks Embedded Coder to load data/code to flash and run from RAM on a TI C2000?

    MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink. For embedded software which is mainly stored in and executed out…

  • [FAQ] FAQ: How do I define a Custom Memory section for a TI C2000 using MathWorks Embedded Coder's Custom Storage Class designer?

    MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink. Suppose we need to align a signal buffer to start on a 512-byte boundary…

  • [FAQ] FAQ: How do I use Simulink “Custom Code” blocks to measure code execution time on TI C2000?

    MathWorks' Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink. Simulink Coder’s Custom Code blocks are a key method to call custom…

  • [FAQ] IQMath

    Other Parts Discussed in Thread: C2000WARE This post addresses some common questions about the C2000 IQMath Library. The library is fully documented in the C2000Ware software package. Q: How do I change an IQmath project to a native floating-point project…

  • [FAQ] C2000 GPIO FAQ

    This post addresses commonly asked questions regarding the GPIO on F28x devices. Some information may have changed over time. Always refer to the latest Technical Reference Manual and datasheet for a particular device. Q: Can I read the state of the…

  • [FAQ] Common CSM and Flash Questions

    Sometimes a device may unexpectedly be locked. This FAQ addresses some common reasons.

  • [FAQ] DRV8353RS-EVM with InstaSPIN and MotorWare support

    Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: DRV8353RS-EVM , DRV8353 , MOTORWARE This is a solution to support the existing InstaSPIN enabled LaunchPad and MotorWare for DRV8353RS-EVM. DRV8353RS-EVM can be mounted on the LAUNCHXL…

  • [FAQ] TMDSCNCD280025C: F280025C controlCARD code hangs waiting for X1 to saturate

    Part Number: TMDSCNCD280025C Other Parts Discussed in Thread: C2000WARE , Hello, While running C2000Ware examples on my TMDSCNCD280025C controlCARD the software always hangs at the following line: What can I do to fix this? Regards, Cody

View FAQ threads