Texas Instruments (TI) C2000™ microcontrollers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search C2000™ microcontroller content or ask technical support questions on our families of real-time control MCUs. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] F05 Flash: How many erase/program cycles can I expect with F05 flash?

    Q: How many write/erase cycles can I expect with F05 flash? At what temperature?

  • [FAQ] F05 Flash: Where are the flash API error conditions documented?

    Other Parts Discussed in Thread: C2000WARE Q: The flash programmer has issued an error "Flash API Error #...". Where can I find the meaning of the flash API error conditions? Where are the flash API error conditions documented?

  • [FAQ] F05 Flash: Why are some GPIOs pulled low during flash programming of the F2833x/F2823x devices?

    Q: When programming the flash of the TMS320F2833x (or F2823x) devices with Code Composer Studio, some GPIOs are pulled low which leads to the potential for damage with external hardware. Why is this happening and how can it be fixed?

  • [FAQ] F05 Flash: Why am I not able to program TMS320F281x Rev G silicon?

    Q: I am trying to program a TMS320F281x (F2812, F2811, F2810) with Rev G silicon and not successful. I am able to program previous revisions. What could the problem be? Note: The change to Rev G silicon occurred over 10 years ago . This FAQ has been…

  • [FAQ] F05 Flash: How do I convert a RAM-based project to a flash-based project?

    Other Parts Discussed in Thread: C2000WARE Q: How do I convert a RAM based project to one that is flash based?

  • [FAQ] F05 Flash: Can flash or OTP be programmed incrementally? Can I program one word, or one bit, at a time?

    Q: Can a flash or OTP location be programmed incrementally? Can I program one word, or one bit, at a time?

  • [FAQ] F05 Flash: What flash programming options exist for C2000 Devices?

    Q: What flash programming options exist for C2000 Devices? How can I create my own flash programmer using a communications port?

  • [FAQ] F05 Flash: Is the flash zero wait-state? How many wait-states are required when running from flash?

    Other Parts Discussed in Thread: C2000WARE Q: Is the flash zero wait-state? How many wait-states are required when running from flash?

  • [FAQ] F05 Flash: What temperature range can the flash be programmed or erased at?

    Q: What temperature range can the flash be programmed or erased at?

  • [FAQ] F05 Flash: Can interrupts be serviced while programming or erasing flash?

    Other Parts Discussed in Thread: C2000WARE Q: Can interrupts be serviced while programming or erasing flash? What happens if the device receives a data word via a communications interface, for example SPI? Will the data word be fetched in the SPIRXBUF…

View FAQ threads