Texas Instruments (TI) C2000™ microcontrollers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search C2000™ microcontroller content or ask technical support questions on our families of real-time control MCUs. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Q: What are the different FFT implementations on a C28x, C28x FPU, and VCU? How do I choose which one to use?
Differences:
32-bit Fixed-Point
This implementation uses the C28 fixed-point CPU. It uses the on-chip 32bit fix-point math capabilities…
Other Parts Discussed in Thread: C2000WARE , CONTROLSUITE Q: Where is C2000Ware, C2000ware Motor Control SDK, or C2000Ware Digital Power SDK license information?
In the root directory of C2000Ware, C2000ware Motor Control SDK, or C2000Ware Digital Power…
MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink.
Answers to some common advanced questions are available at MATLAB Answers…
MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink.
This is the fastest way to log data in realtime. In the two model…
MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink.
Texas Instruments C2000™ MCUs support 16-bit and 32-bit data types…
MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink.
For embedded software which is mainly stored in and executed out…
MathWorks Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink.
Suppose we need to align a signal buffer to start on a 512-byte boundary…
MathWorks' Embedded Coder with the MathWorks TI C2000 Hardware Support Package allows automatic build and execution on C2000 hardware from models developed using MATLAB and Simulink.
Simulink Coder’s Custom Code blocks are a key method to call custom…
Other Parts Discussed in Thread: C2000WARE This post addresses some common questions about the C2000 IQMath Library. The library is fully documented in the C2000Ware software package.
Q: How do I change an IQmath project to a native floating-point project…
This post addresses commonly asked questions regarding the GPIO on F28x devices. Some information may have changed over time. Always refer to the latest Technical Reference Manual and datasheet for a particular device.
Q: Can I read the state of the…
