Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] Where did the PRU-ICSS Wiki Go?

    Where did the PRU-ICSS Wiki go? It used to be at URL processors.wiki.ti.com/.../PRU-ICSS

  • [FAQ] TDA4VM: How to check if R5F is in lock-step or split mode

    Part Number: TDA4VM How can I check if R5F is running in lock-step or split mode? Is there some register I can look at?

  • [FAQ] Where did the Processors Wiki Go?

    Where did the Processors wiki go?

  • [FAQ] PROCESSOR-SDK-DRA8X-TDA4X: How to build sysfw.itb file for HS device?

    Part Number: PROCESSOR-SDK-DRA8X-TDA4X This article explains how to build sysfw.itb file for J7ES-HS device. It assumes that PSDKLA is installed and setup correctly as explained in the link: software-dl.ti.com/.../index.html

  • [FAQ] Compiler/TDA2E: The steps to enable the early-boot late attach use-case in vision SDK 3.8 Linux

    Part Number: TDA2E Tool/software: TI C/C++ Compiler Hi, Can I know the steps to enable the early boot late attach use-case in vision SDK 3.8?

  • [FAQ] DRA745: How to determine if IVAHD can be used for a certain resolution and also how many instances can be supported for that resolution?

    Part Number: DRA745 I'm trying to determine this information for various resolutions in the end product.

  • [FAQ] Compiler/TDA2E: The steps to enable the early-boot late attach use-case in vision SDK 3.7 Linux

    Part Number: TDA2E Tool/software: TI C/C++ Compiler Hi, Can I know all the steps to enable the early-boot late attach use-case in vision SDK Linux?

  • [FAQ] CCS/AM5728: AM57xx: Boot modes supported

    Part Number: AM5728 Tool/software: Code Composer Studio What are the boot modes supported on the AM57xx variants on the SDK? What are the board modifications that need to be done to enable non-default boot modes on the am57xx-IDKs?

  • [FAQ] CCS/TDA4VM/J721e/J7200: How to enable RTC on Jacinto TDA4x EVM?

    Part Number: TDA4VM Tool/software: Code Composer Studio MCP79410-I/SN is connected I2C0 interface of J721E SoC. How to enable the same?

  • [FAQ] PROCESSOR-SDK-DRA8X-TDA4X: How to build uboot and SPL for the HS device?

    Part Number: PROCESSOR-SDK-DRA8X-TDA4X This article explains building uboot and spl for the HS sample..

View FAQ threads
  • Threads 198428 Discussions