Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TDA4VM: GPIO+DMA Trigger in TDA4 and test in SDK7.1

    Part Number: TDA4VM How to use GPIO to capture gpio PWM input and trigger timer then using DMA to transfer the data.

  • [FAQ] TDA4VM: HS: Building & booting on HS devices on latest Linux SDK

    Part Number: TDA4VM Please provide instructions for building and booting for HS devices on Linux SDK.

  • [FAQ] AM64x: What is the Time Sync Router for? How do I use it?

    Part Number: AM6421 AM64x has interrupt routers, just like any other processor. But it also has an interrupt router called the Time Sync Router (TSR) that is designed to route an input interrupt to multiple output interrupts. What is the TSR for? The…

  • [FAQ] TDA4VM: How to read on-die temperatures on J7 family of SoCs using Linux

    Part Number: TDA4VM There are multiple on-die sensors on the j7 family of SoCs. How to read temperature using Linux?

  • [FAQ] How do I flash the AM335x SBL and my application into the McSPI flash using the PDK flashing tool?

    Other Parts Discussed in Thread: UNIFLASH , AMIC110 I have an AM335x board with McSPI flash memory. How do I flash my bootloader and application into the McSPI memory using the flashing tool provided in the PDK?

  • [FAQ] How do I flash the AM335x SBL and my application into the McSPI flash using the Uniflash tool?

    Other Parts Discussed in Thread: UNIFLASH , AMIC110 I have an AM335x board with McSPI flash memory. How do I flash my bootloader and application into the McSPI memory using the Uniflash tool?

  • [FAQ] How do I boot AM335x and run my RTOS application from a Micro SD card?

    I want to boot my AM335x board and run an RTOS-based application from a Micro SD card. How can I do that?

  • [FAQ] C665x, C667x, K2E and K2H: IPC build in RTOS Processor SDK

    How to build, compile and Install IPC libraries and binaries for C665x, C667x, K2E and K2H RTOS SDK?

  • [FAQ] TDA4VM: How to enable Inline ECC for memory > 2GB

    Part Number: TDA4VM Enabling inline ECC for memory size <= 2GB is simpler as the memory address range is with in 32 bit address(0x80000000. - 0xFFFFFFFF) How to enable Inline ECC > 2GB address.

  • [FAQ] TDA4VM: How to test GPIO interrupts

    Part Number: TDA4VM Is there a way to test the functionality of GPIO interrupts without having to physically drive the line as input and controlling the pin state externally?

View FAQ threads
  • Threads 197927 Discussions