Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TDA4VM: How to configure 4266MTS DDR on 7.2 SDK

    Part Number: TDA4VM Hi， I use yocto to compile mc:k3r5:u-boot-ti-staging to generate the tiboot3.bin file, and then use the SD boot method. But I found that when using the 7.2 version of tiboot3.bin, the ddr frequency is 3200M, but when using the…

  • [FAQ] PROCESSOR-SDK-J7200: how to use SBL and boot system with rootfs on eMMC

    Part Number: PROCESSOR-SDK-J7200 Other Parts Discussed in Thread: DRA821 SBL is used for fast CAN response. In the boot_app_mcu_rtos demo: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j7200/07_03_00_07/exports/docs/mcusw/mcal_drv/docs…

  • [FAQ] TDA4VM: IPC_Test on PSDK QNX 7.2 / PSDK QNX 7.3

    Part Number: TDA4VM Is ipc_test supported on PSDK QNX 7.2 and PSDK QNX 7.3?

  • [FAQ] PROCESSOR-SDK-J721E: nvme initialization and sdk commands

    Part Number: PROCESSOR-SDK-J721E This is more of an fyi if you want to connect an NVME SSD drive to the J721 EVM. The drive i bought is https://www.amazon.com/gp/product/B08V83JZH4/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 once you get…

  • [FAQ] DRA821U: How to test RGMII with DRA821 on EVM

    Part Number: DRA821U Other Parts Discussed in Thread: DRA821 How to test RGMII configuration with DRA821 on EVM ? As only SGMII is enabled by default ?

  • [FAQ] TDA4VM: Resource table for IPC

    Part Number: TDA4VM Other Parts Discussed in Thread: SYSBIOS Where can I find the resource table for IPC application running on MCU1_0. Also, what resource table should I use when loading another core?

  • [FAQ] TDA4VM: How to Configure CPSW 5G/9G ALE

    Part Number: TDA4VM How to configure CPSW 5G/9G to add static entries ?

  • [FAQ] TDA4VM: how to load MAIN core images from eMMC with boot_app

    Part Number: TDA4VM To enable fast CAN response, I need to use SBL to load MCU1_0 image (either AUTOSAR or TI-RTOS). boot_app_mcu_rtos is the demo ap p in SDK release for the early CAN response implementation. The boot app inside can be used to boot…

  • [FAQ] J7200XSOMXEVM: How to use the QSGMII expansion board with DRA821 SDK V7.3

    Part Number: J7200XSOMXEVM Other Parts Discussed in Thread: DRA821 I have got the DRA821 EVM (J7200 SOM, and J7 common processor board), and also the "Quad-Port Ethernet expansion board" (a.k.a QSGMII expansion board). J7200 SOM: https://www.ti.com…

  • [FAQ] DRA821U: change app_remoteswitchcfg_server log UART port

    Part Number: DRA821U Other Parts Discussed in Thread: DRA821 I am working on a customer DRA821 board. As the default UART port isn't available for the ethernet firmware log output. How can I change the log output to another UART instance?

View FAQ threads
  • Threads 198009 Discussions