[FAQ] TMS570LC4357: Can you provide the list of Documentation bugs in Hercules Devices?

TMS570LC4357: TMS570LC4357 PWM DEADBAND

Didn't mention the frequency for calculated dead band delays in the table.

Typo in the 21.4.2.1 Index Event Latch section in TMS570LS12x TRM

QEPCTZ is not correct and it should be QEPCTL.

TMS570LC43x TRM

28.2.6.6 Parallel Mode

Here it is mentioned that "Only module MIBSPIP5 supports Parallel Mode.". It was typo because MIBSPIP1 also supports parallel mode.

(+) TMS570LC4357: Stuck on working with SPI1 - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

(+) TMS570LC4357: When using MibSPI1, how to configure MISO1 to output - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

ARM Assembly Language Tools v20.2.0.LTS User's Guide

The guide mentions __TI_SYSMEM_SIZE but actual creating __SYSMEM_SIZE

In RM48 HDK user guide, the J11-70 pin connected to ground but according to the HDK schematic it was connected to nRST pin. So, the user guide should need to correct.

In RM46 HDK schematic document, it is shown that ETM pins were routed to the MIPI connector however there was no ETM support on RM46.

Some PINMMR definitions were missing in TRM of TMS570LS1227

In TMS570LS0914 datasheet at table 7-32, it is mentioned that SPI2nCS[1], however this is not available for this SPI instance and there is only one chip select is there for this instance.

In TMS570LC4357 TRM the Table 28-2 giving wrong information about number pins of some SPI instances, so please refer datasheet for correct information.

In TMS570LC4357 HDK user guide at table 2-8 (Expansion connector), has wrong pin names for the pins C11, C12, C13, C14, C15, C16, C17, D14 and D15.

The D9 mentioned on the schematic board is actually E9(EMIF_A5), and similarly D10 mentioned on the board is actually E10(EMIF_nDQM0):