• Threads 52635 Discussions
Texas Instruments (TI) Microcontrollers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search for content on other microcontrollers or ask technical support questions on the extensive portfolio of microcontrollers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] MSPM0G3519: Accelerating ED25519PH Performance using the MSPM0G MATHACL

    Part Number: MSPM0G3519 This thread is created to presenta an efficient implementation of the ED25519PH elliptic curve cryptography algorithm (from the Libsodium library) optimized for MSPM0G microcontrollers with MATHACL module. While the ARM Cortex…

  • [FAQ] F29H859TU-Q1: How to configure a GPIO input interrupt which can be triggered by an external source?

    Part Number: F29H859TU-Q1 Hi expert, Please provide me the setps on how to configure GPIO intput external interrupts

  • [FAQ] AM2612-Q1: How to optimize the SBL Image size?

    Part Number: AM2612-Q1 Other Parts Discussed in Thread: SYSCONFIG Hi expert, Please provide ways the SBL Image size can be reduced.

  • [FAQ] AM64x/AM243x: What are the implications of enabling or disabling the Security Handover feature in the MCU+ SDK

    Other Parts Discussed in Thread: SYSCONFIG The System Firmware (SYSFW) on AM64x and AM243x devices supports a Security Handover mechanism, which controls the transfer of security ownership between SYSFW and the application host. The full feature description…

  • [FAQ] AM64x/AM243x: How to enable MCELF encrypted boot in MCU+ SDK

    Part Number: AM6442 Prior the SDK version v1 This FAQ discusses the steps to enable the MCELF encrypted boot in the MCU+ SDK v12.01.00.33 for AM64x and AM243x devices.

  • [FAQ] AM2612-Q1: How to use UniFlash CLI Tool

    Part Number: AM2612-Q1 Other Parts Discussed in Thread: UNIFLASH Hi expert, Please provide steps to flash AM261 using UniFlash CLI tool. Provide commands for relevant operations as well

  • [FAQ] MSPM33C321A: Reprogram NM on bank-swapped device may lead to device blocking

    Part Number: MSPM33C321A Other Parts Discussed in Thread: UNIFLASH , SYSCONFIG 1. Background For bank swap, what really swapped is the address of bank0 and bank1. However for MSPM33C321A, not only MAIN FLASH but also NONMAIN FLASH will swap the…

  • [FAQ] F29H859TU-Q1: Is it possible to write to CPU3 flash region from CPU1 in bank mode3. If so how to do this?

    Part Number: F29H859TU-Q1 Hi experts, Is it possible to write to CPU3 flash region from CPU1 in bank mode3. If so how to do this? Please provide example on how to do this.

  • [FAQ] F29H85X-SOM-EVM: How to flash two images into the same bank without them overwriting each other

    Part Number: F29H85X-SOM-EVM Hi expert, I want to flash two images into same banks. Suppose my bootloader is taking flash space from 0x1000_0000 to 0x1000_CFFF. The application is taking space from 0x1000_D000. When flashing app, boot is getting erased…

  • [FAQ] F29H859TU-Q1: How to Flash SSU Example in Bank Modes other than Bank Mode 0 and what is the significance of FOTA enable checkbox

    Part Number: F29H859TU-Q1 Hi expert, Can you please explain how to flash SSU examples in other bank modes. What is the FOTA enable checkbox and how is it requried here?

View FAQ threads