Texas Instruments (TI) Power management support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search power management IC content or ask technical support questions on everything from linear and DC/DC switching regulators to battery management and LED drivers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] UCC21750-Q1: Gate Drivers Actual Peak Current

    Part Number: UCC21750-Q1 Other Parts Discussed in Thread: UCC21750 , Tool/software: Gate Driver Actual Peak Current: UCC21750/UCC21750-Q1 is a constant voltage driver, so the driver will supply current until the gate is charged to the VDD-VEE potential…

  • [FAQ] UCC21750-Q1: Isolated Gate Drivers Bias Current Requirement for Primary side

    Part Number: UCC21750-Q1 Tool/software: What are the parameters to be considered for Low voltage (Primary side) Bias supply current requirement? Primary Bias Supply Power Requirement: In datasheet , Vcc and Vdd current plots for different conditions…

  • [FAQ] UCC21750-Q1: Isolated Gate Drivers Bias Current Requirement

    Part Number: UCC21750-Q1 Tool/software: What are the parameters to be considered for VDD/VCC2 bias current requirement? How to define it for N parallel switches? Isolated gate drivers are used to switch IGBT, Si and SiC power switches…

  • [FAQ] TPS3701: How to monitor negative supply rails with a voltage supervisor

    Part Number: TPS3701 Other Parts Discussed in Thread: TPS3700 Tool/software: Can you please provide some guidance and examples on negative supply rail monitoring solutions?

  • [FAQ] TI-PD-ANALYZER: FAQ

    Part Number: TI-PD-ANALYZER Tool/software: WHAT IS THE TI PD ANALYZER? The TI-PD-ANALYZER is a low-cost Power Delivery Analyzer and can be used to monitor and log USB type-C power delivery (PD) data by monitoring the configuration channels (CC1…

  • [FAQ] BQ41Z50: ECC Authentication Tool

    Part Number: BQ41Z50 Tool/software: To use the ECC Authentication tool for BQ41z50, refer to the provided PDF guide. It offers a high-level overview of the ECC algorithm and step-by-step instructions for using the ECC GUI. PDF Guide and Executable…

  • [FAQ] TPS1HB08-Q1: ISNSFH at low VBB

    Part Number: TPS1HB08-Q1 Tool/software: Hello All, When operating at low VBB the RSNS value needs to be scaled to match this operating voltage. For an application reference, to get the correct ISNSFH values mentioned in the data sheet the following…

  • [FAQ] TPS274C65: CRC Calculation Function Example

    Part Number: TPS274C65 Tool/software: The TPS274C65 device has an optional cyclic redundancy check (CRC) feature to ensure each SPI frame (SPI Format: COPL = 0, CPHA = 1) is transmitted and received properly. This CRC calculation is based on the CRC-4…

  • [FAQ] TPS25984B: SOA plot for the device

    Part Number: TPS25984B Tool/software: Requesting the SOA or AOA plot for the TPS25984B device.

  • [FAQ] BQ27Z758 FAQs

    Part Number: BQ27Z758 Tool/software: BQ27Z758 FAQ Home Page This is the home page for common questions in relation to the BQ27Z758 . FAQs Related FAQ home pages: Impedance Track FAQ home page What Information does TI need to help with…

View FAQ threads