Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] PROCESSOR-SDK-AM62X: How to Toggle GPIOs and LEDs from U-Boot Command Prompt

    Part Number: PROCESSOR-SDK-AM62X Tool/software: I want to toggle a GPIO or toggle a LED from the U-Boot Prompt. How can I do this?

  • [FAQ] TDA4VH-Q1: Enabling QUAD Ethernet Communication on TDA4VH TI EVM

    Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VH Tool/software: Enabling QUAD Ethernet Communication on TDA4VH TI EVM

  • [FAQ] AM62X: How to Allocate & Use GPIOs from Different Device Domains

    Part Number: PROCESSOR-SDK-AM62X Other Parts Discussed in Thread: SK-AM62B-P1 , SYSCONFIG Tool/software: I want to use MCU GPIO from A53/Linux or Main Domain GPIO from M4/MCU. How can I allocate these GPIOs and use them?

  • [FAQ] AM2432: Loop back clock for RGMII and MII

    Part Number: AM2432 Tool/software: Hi, Customer is asking the following question. When configured to operate as the " MII " Clock source, the signal does NOT needed to be routed back to the RMII_REF_CLK pin ? Customer is refering Datasheet …

  • [FAQ] WINCESDK-AM1XOMAPL1X: Windows CE6 / WinCE BSP Resources

    Part Number: WINCESDK-AM1XOMAPL1X Other Parts Discussed in Thread: DM3730 Tool/software: This is a general FAQ page for questions about WinCE6 on TI devices. TI does not currently offer Windows CE6 support. By that we mean, if you have any questions about…

  • [FAQ] TDA4VM-Q1: SR2.0 update Keywriter process

    Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM Tool/software: Hi Customer, This FAQ is about TDA4VM SR2.0 HS Keywriter , there is some change need apply to Default keywriter: 1. Download and Install ti-processor-sdk-rtos-j721e-evm-09_02_00_05…

  • [FAQ] Custom board hardware design - Master (Complete) list of FAQs for all Sitara processor (AM62x, AM64x, AM243x, AM335x) families

    Part Number: AM625 Other Parts Discussed in Thread: AM623 , , AM620-Q1 , , AM62A7 , AM62A7-Q1 , AM62A3-Q1 , AM62A3 , AM62P-Q1 , AM62P , SK-AM62 , TMDS64EVM , SK-AM64B , SK-AM62B-P1 , SK-AM62-LP , SK-AM62-SIP , SK-AM62B , SK-AM62A-LP , SK-AM62P-LP , TMUX1308-Q1 , AM33…

  • [FAQ] TDA4VM-Q1: TDA4VM Ethernet Loopback Test

    Part Number: TDA4VM-Q1 Other Parts Discussed in Thread: TDA4VM Tool/software: This is the configuration description and test results of the Ethernet loopback test using TDA4VM User guide: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7…

  • [FAQ] AM623: Power / GND pins associated with GPMC_CLK

    Part Number: AM623 Tool/software: Which Power / GND pins are most associated with driving the GPMC0_CLK signal for the AM623 AALW package? Our design is experiencing radiated emissions issues where the 7th and 9th harmonics of the GPMC0_CLK are too high…

  • [FAQ] PROCESSOR-SDK-AM64X: How to do IPC communication with only two cores ? (say R5FSS0-0 and R5FSS1-1).

    Part Number: PROCESSOR-SDK-AM64X Other Parts Discussed in Thread: SYSCONFIG Tool/software: I am trying to build IPC example for R5FSS0-0 and R5FSS1-1 but getting build issues. Can someone please guide me how to create IPC examples for two cores?

View FAQ threads
  • Threads 189196 Discussions