| Audio Switches | Features & Parameters | Multiplexer Selection Guide | Resolving Common Design Challenges | Simulation Modeling |
| Training & Resources | Quality & Packaging | Switches & Multiplexers E2E Home Page  |
1. [FAQ] How does Injection Current Control Work in TI Analog Multiplexers & Switches?
2. [FAQ] How to Calculate the Max Junction Temperature of an Analog Switch/Multiplexer.
3. [FAQ] How do I Approximate Propagation Delay and Channel to Channel Skew in an Analog Switch/Multiplexer?
4. [FAQ] What are the Break-Before-Make (BBM) and Make-Before-Break (MBB) features in analog switches / multiplexers and how are they different?
5. [FAQ] Do I need powered-off protection? (HI-Z when Vcc = 0V)
6. [FAQ] What is charge injection, crosstalk, off isolation...etc? Is there a glossary of terms?
7. [FAQ] Where can I learn more about TI’s Analog Switches / Multiplexers Features and Specifications?
8. [FAQ] What is Fail-Safe Logic?
9. [FAQ] What are the VIH & VIL Levels of an Analog Switch / Multiplexer?
10. [FAQ] What are the timing characteristics of TI Analog Switches/Multiplexers?
11. [FAQ] What are the Types of Architectures TI Switches and Multiplexers Use and how do I know which one my device has internally?
12. [FAQ] Do TI Analog Switches/Multiplexers have Internal ESD Protection?
2. [FAQ] How to Calculate the Max Junction Temperature of an Analog Switch/Multiplexer.
3. [FAQ] How do I Approximate Propagation Delay and Channel to Channel Skew in an Analog Switch/Multiplexer?
4. [FAQ] What are the Break-Before-Make (BBM) and Make-Before-Break (MBB) features in analog switches / multiplexers and how are they different?
5. [FAQ] Do I need powered-off protection? (HI-Z when Vcc = 0V)
6. [FAQ] What is charge injection, crosstalk, off isolation...etc? Is there a glossary of terms?
7. [FAQ] Where can I learn more about TI’s Analog Switches / Multiplexers Features and Specifications?
8. [FAQ] What is Fail-Safe Logic?
9. [FAQ] What are the VIH & VIL Levels of an Analog Switch / Multiplexer?
10. [FAQ] What are the timing characteristics of TI Analog Switches/Multiplexers?
11. [FAQ] What are the Types of Architectures TI Switches and Multiplexers Use and how do I know which one my device has internally?
12. [FAQ] Do TI Analog Switches/Multiplexers have Internal ESD Protection?
16. [FAQ] How much current can I put through my analog switch/multiplexer?
17. [FAQ] What are the differences between PCA and TCA I2C switches?
17. [FAQ] What are the differences between PCA and TCA I2C switches?
19. [FAQ]What is Latch up in CMOS Devices and How can Latch up Immune Multiplexers Improve system Reliability
____________________________________________________________________________________________________________________________