Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM5718: [PATCH] CPSW linux phy loopback self-test implementation

    Part Number: AM5718 Hello, I have implemented a phy loopback self-test procedure in ti-linux-kernel (branch=ti-rt-linux-5.4.y ; commit=3be7c8fa970782c88c2a188f7310ccc7256121f7) git repository for the drivers/net/ethernet/ti/cpsw.c driver. It is…

  • [FAQ] PROCESSOR-SDK-AM57X: How to boot from QSPI flash on AM57x.

    Part Number: PROCESSOR-SDK-AM57X Other Parts Discussed in Thread: UNIFLASH Hi Team, We need to boot from QSPI flash on AM571x, can you mention the steps required to do so.

  • [FAQ] AM335x: How to migrate to a different speed grade SoC in the existing product design with u-boot/Linux SW

    Part Number: AM3358 Other Parts Discussed in Thread: TPS65910 Hi, Linux Version: Linux 4.9.28 Uboot Version: U-Boot 2013.10 We are in process of evaluating partno AM3358BZCZA80 for our custom board which is based on AM3358BZCZA60 and it is clocked…

  • [FAQ] TDA4VM: TDA4VM/DRA829V: routing PCIE reference clock externally

    Part Number: TDA4VM Other Parts Discussed in Thread: DRA829V , , DRA829 TDA4VM/DRA829V supports multiple PCIe reference clock (refclk) configurations, where each of the SERDES reference clock can be supplied from either external input or from on-chip…

  • [FAQ] TDA4VM: Detailed Step for UART boot

    Part Number: TDA4VM I want to try UART boot manually. Can i have the detailed steps to boot to u-boot using UART boot on TDA4VM.?

  • [FAQ] TDA4VM: MCUSW demo on CAN along side Linux on A72

    Part Number: TDA4VM As the MCUSW demos are standalone demos hence the expectation is that they will not work out of the box along with Linux on A72 and other remote core firmwares. Can you help me integrate the MCUSW can_profile_app (on MCU1_0 or MCU2_1…

  • [FAQ] TDA4VM: How to enable power for a module (CAN, ADC, etc..) from remote core firmware?

    Part Number: TDA4VM I am using the MCAN examples from the SDK and I am integrating this firmware along with Linux on A72. I see my firmware crashing when configuring the CAN module. How can I resolve the issue?

  • [FAQ] TDA4VM: Debugging remote core firmware using CCS

    Part Number: TDA4VM I am booting remote cores (R5F) from u-boot which run along side Linux (on A72) in my system. I want to debug the remote core firmware by stepping through the source code and modifying / viewing registers and memory. How can I do this…

  • [FAQ] TDA4VM: Segmentation fault while flashing using UNIFLASH

    Part Number: TDA4VM Other Parts Discussed in Thread: UNIFLASH I am flashing to OSPI using uniflash and below are my commands: karan@karan:~/Desktop$ sudo ./dslite.sh --mode processors -c /dev/ttyUSB1 -f uart_j721e_evm_flash_programmer_release.tiimage…

  • [FAQ] TDA4VM: How to change peripheral initialization from remote core firmware using board library?

    Part Number: TDA4VM I want to initialize some additional peripherals for my custom firmware on R5F and remove some redundant initializations. How do I do this using board library in the SDK?

View FAQ threads
  • Threads 198021 Discussions