Texas Instruments (TI) Interface support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search interface IC content or ask technical support questions on everything from ESD protection to interfacing with USB, Ethernet, and HDMI. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: TUSB2E221 Other Parts Discussed in Thread: TUSB2E22
The TUSB2E221 is TI's latest eUSB2 2-port repeater, and offers a variety of updates and improvements to confirm to the eUSB2 V1.2 spec. Some of the updates are as follows:
1.2V and…
[Click here to return to the INT-TXP USB Homepage]
Welcome to the USB3.x E2E Page
Listed below are a variety of resources to assist with the implementation of USB3.x!
USB3.x Training:
USB3.x Linear Redriver Signal Conditioning Theory
High…
[Click here to return to the INT-TXP USB Homepage]
Welcome to the USB2.0/ eUSB2 E2E Page
Listed below are a variety of resources to assist with the implementation of USB2.0 & eUSB2!
USB2.0 Training:
What is a USB Redriver?
Layout Basics for…
[Click here to return to the INT-TXP USB Homepage]
Welcome to the USB Hubs E2E Page
Listed below are a variety of resources to assist with the implementation USB Hubs!
USB Hubs Training:
Frequently Asked Questions (FAQs):
[Click here to return to the INT-TXP USB Homepage]
Welcome to the USB Type-C E2E Page
Listed below are a variety of resources to assist with the implementation USB Type-C!
USB Type-C Training:
USB Type-C handbook
Demystifying the power and…
Welcome to the Interface TXP-USB E2E Page
Here you will find training/ design resources/ support for our USB devices.
Select an icon below to find a relevant collection of FAQ's, Applications Notes, Training Videos and more!
USB Type…
Part Number: TUSB1002A
Please use the links below to access our collateral regarding linear and limited redrivers:
Linear vs. Limited Redriver Training Slides
Linear vs. Limited redriver Training Video
Part Number: ESD321
Hi,
ESD321DYA has the oppositie pin configuration than what is expected. Is Pin 2 supposed to be IO and Pin 1 supposed to be GND?
Thanks
FAQ: Logic and Voltage Translation > > Current FAQ
[FAQ] What is the Difference Between I2C and SPI I/O Expansion
[FAQ] VOH/IOH/VOL/IOL and Total ICC Current Definitions
Part Number: TDP2004
This Master FAQ lists serves as a point of reference to find all FAQs made by TI's signal conditioning Team.
DPHY: 1. [FAQ] SN75DPHY440SS: Is it okay to swap the polarity and lane order? - Interface forum - Interface - TI E2E…
