Texas Instruments (TI) C2000™ microcontrollers support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search C2000™ microcontroller content or ask technical support questions on our families of real-time control MCUs. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] C2000WARE: Why is my high resolution (HR) PWM signal not working correctly? (General debug tips)

    Part Number: C2000WARE Other Parts Discussed in Thread: SYSCONFIG If you are having trouble debugging an issue with your HRPWM signal, here are some tips on where to start:

  • [FAQ] C2000 HRPWM (High-Resolution PWM): Frequently Asked Questions

    Other Parts Discussed in Thread: SYSCONFIG , C2000WARE Where can I find answers to frequently asked questions related to using HRPWM?

  • [FAQ] TMS320F28384D: [FAQ] ERAD: Unable to write to ERAD_GLOBAL_REGS[GLBL_OWNER] register and change module ownership (CCS v11.0 or older)

    Part Number: TMS320F28384D When running application code from Flash, ERAD_GLOBAL_REGS[GLBL_OWNER] does not change when written to from the CCS registers view or from application code, even with EALLOW enabled. Why does the register write fail?

  • [FAQ] Can someone help support questions on the TMS320F240/TMS320F241/TMS320F243 or LF240xA/LC240xA devices?

    TMS320F240/TMS320F241/TMS320F243: The TMS320F240/TMS320F241/TMS320F243 devices attained End-of-Life (EOL) status many years ago. TI stopped making these devices, and they are no longer available from TI. The entire tool-chain (debug probes, IDE, etc…

  • [FAQ] TMS320F28379D: What is the FIT/MTBF for TMS320F2837x devices?

    Part Number: TMS320F28379D Q: What is the FIT/MTBF for TMS320F2837x devices? A: FIT/MTBF for TI devices can typically be found at MTBF and FIT Rate Estimator Currently there is a technical issue preventing data for the TMS320F2837x devices to be displayed…

  • [FAQ] How do I generate the block diagrams generated by C2000 SysConfig? (clb.dot, epwm.dot, adc.dot)

    Other Parts Discussed in Thread: SYSCONFIG In a SysConfig based C2000 project, I see the tool generates a series of ".dot" files. How do I convert these files to the block diagram visualization in either HTML or SVG files so I can open/view them in CCS…

  • [FAQ] How do I fix a SysConfig CCS Project which is not building due to "Invalid argument '--product': No product with name "C2000WARE" and version" ?

    Other Parts Discussed in Thread: SYSCONFIG , C2000WARE I added a SysConfig file to a CCS project and now the project is not building due to an error caused by the SysConfig tool. The error is shown below: Invalid argument '--product': No product with…

  • [FAQ] C2000 Software Guides in Chinese

    The following development guides are now available in Chinese: Software Guide: https://software-dl.ti.com/C2000/docs/software_guide_zh/index.html Optimization Guide: https://software-dl.ti.com/C2000/docs/optimization_guide_zh/index.html CLA SW…

  • [FAQ] How do C2000™︎ real-time MCUs fit in Automotive LiDAR applications?

    This FAQ is designed to give a high-level overview of how C2000 real-time MCUs fit in Automotive LiDAR systems. What is Automotive LiDAR? Application for Advanced Driver Assistance Systems (ADAS) and/or high-level autonomous driving, used to create…

  • [FAQ] How do I use the SWITCH button in C2000 SysConfig within a CCS Project to change my device PACKAGE or switch to BOARD view?

    Other Parts Discussed in Thread: SYSCONFIG I used the SWITCH button to change my device/package/board in SysConfig, however when I saved, closed and reopened the file, it shows the old device/package/board. When I try to compile the project, I get an…

View FAQ threads