Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 46 subscribers
  • Views 796 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [H] High-Speed Amplifiers Stability

Nick Nauman
Expert 6050 points
Frequently Asked Questions: Amplifiers >> High Speed Amplifiers >> Stability
Circuit Design Considerations Transimpedance Amplifier Circuits Fully Differential Amplifier Circuits ADC Driver Circuits Other Op Amp Circuits
Stability Input/Output Limitations PCB Layout Guidelines Simulation & Modeling Power, Thermal, Quality, & Manufacturing

  

    

Stability

Related Content:

Decompensated Amplifier Stabilization Circuit

Stabilizing Differential Amplifiers as Attenuators Design Guide

Maximizing System Total Harmonic Distortion Using High Speed Amplifiers

Has distortion got your amplifier down? Get more bandwidth!

 

Top E2E FAQs and Posts:

How to convert phase noise unit "dBc/Hz" to "rad/√Hz"?

OPA847: Voltage Noise Peaking in Transimpedance Amplifier (TIA) - why does the addition of a feedback capacitor cause voltage noise peaking?

OPA858: Photodiode Amplifier for Short (1-2ns) Laser Pulse

TINA/Spice/OPA855: OPA855 Transimpedance Amplifier self-oscillation

LMP7718: Stability analysis of TIA with DC servo

TINA/Spice/LMH6505: Simulation configuration to determine open loop gain & phase response (stability)

OPA656: Small Signal Bandwidth and its relationship to the Gain-Bandwidth Product

THS3217: How to minimize overshoot

TINA/Spice/OPA657: Very Basic Query regarding Phase Margin/Stability

OPA2863: AC Pspice Simulation for Stability + Monte Carlo

TINA/Spice/LMH6505: Simulation configuration to determine open loop gain & phase response (stability)

OPA657: Simulation error

Is your op amp filter ringing? Look at Q!