Texas Instruments (TI) Data converters support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search data converter IC content or ask technical support questions on everything from analog to digital converters (ADCs) and digital to analog converters (DACs) to high speed ADCs and special function data converters. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: ADS131A04 Other Parts Discussed in Thread: ADS131A02
The data sheet for ADS131A0x states that the device responds with the READY word after reset: 0xFF02 for ADS131A02 and 0xFF04 for ADS131A04. However, if I send multiple NULL command frames…
Other Parts Discussed in Thread: ADS1256 , ADS124S08 , ADS8688 , ADS131M08 My ADC’s datasheet gives the input range as ±VREF. Does that mean I can measure negative voltages with respect to ground?
Other Parts Discussed in Thread: DAC43401-Q1 , DAC43401 , DAC53401-Q1 , DAC53401 , DAC53701 , DAC43701 , DAC53701-Q1 , DAC43701-Q1 , DAC63204 , DAC53204 , DAC43204 , DAC63004 , DAC53004 , AFE539A4 I have used a smart DAC in my design and there is no on board controller…
Part Number: DAC80501 I am using the DAC80501 with the internal reference and a 3.3V supply. My I2C communication works correctly but I am unable to update the DAC output. What is going wrong?
Part Number: ADC128S102QML-SP
In the datasheet, it is mentioned that analog power rail should ramp before digital power rail during power up.
What about during power down? Is there guidance about proper sequencing?
Should digital power rail ramp down…
Part Number: ADS7828
Hi,
My customer wants to use ADS7828E/250G4. However, I didn't find ESD rating parameters from the datasheet, which are needed in customer company's AVL process.
Could you help to provide it?
Thanks,
Andrew
Part Number: ADS7138 Other Parts Discussed in Thread: ADS7128
Hello,
I have an application with an unbuffered higher impedance source directly connected to the ADS7138 and ADS7128 devices. What should I expect for the input bias current/ leakage currents…