Texas Instruments (TI) Interface support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search interface IC content or ask technical support questions on everything from ESD protection to interfacing with USB, Ethernet, and HDMI. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Other Parts Discussed in Thread: DP83869 Summary:
All of our Industrial Ethernet PHYs support Transformer-less Operation via Capacitive Coupling except for the DP83867.
The DP83867 does not support Transformer-less Operation.
List of Industrial Ethernet…
Part Number: DP83867E Other Parts Discussed in Thread: DP83869
The DP83867 and DP83869 both have the same Vdiff Upper and Lower Input Limits of:
100 mV and 800 mV
Other Parts Discussed in Thread: ESD2CANXL24-Q1 , ESD2CAN24-Q1 , ESD2CANFD24-Q1 , ESD122 What should be considered when selecting a diode with parasitic capacitance?
Part Number: DP83TG720R-Q1
SGMII signal is high frequency low-voltage differential signal. Both layout design and measurements need to be accurate for good eye diagram capture.
Common board design guidelines:
100ohms+/-10% differential traces,
ac-coupling…
Other Parts Discussed in Thread: ESD321 , STRIKE What is the TLP clamping voltage, and how is it different compared to the 8/20μs clamping voltage?
Take the electrical characteristics for ESD321 as an example:
Part Number: LMH0303 Other Parts Discussed in Thread: LMH0307 , Background:
The LMH0307/3 termination fault detection was never designed to be precise; its purpose is to provide an indication when no cable is connected to the output (near end). The termination…
Part Number: DS90UB953-Q1
Hi TI expert
Can you pls help to confirm if the serializer (DS90UB953)can have Frozen and delayed video output failure modes? If Yes, pls share the safety mechanisms for these failure modes.
Thanks
Br
Weicheng
