Texas Instruments (TI) Interface support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search interface IC content or ask technical support questions on everything from ESD protection to interfacing with USB, Ethernet, and HDMI. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: DS90UB934-Q1
Hello Team,
I have question about PCLK output of DS90UB934-Q1.
Q. Is there any requirement for the input impedance of the load in order to impedance matching?
Q. Is it acceptable to deliver the PCLK for more than 2 loads…
Other Parts Discussed in Thread: TVS2700 , TVS2701 Hi team,
I was having hard time understanding the definitions of DC current rating of TVS datasheet. Could you please help me understand the concept?
For the uni-directional TVS it is stated like…
Part Number: DS90UB962-Q1
Hi,Team
In datasheet layout session , Why we recommend that S>3W between RIN+ and RIN- trace ? Don't they need Tightly coupled or Loosely coupled?
Part Number: DS90UB949-Q1
Dear team,
1. If the customer only uses single port, can they use port 1?
2. If the customer connect 949 to 948 and use dual link mode, is it ok to connect 949's port 0 to 948's port 1 and connect 949's port 1 to 948's…
Part Number: TUSB8041 Other Parts Discussed in Thread: TUSB8044A , , TUSB8020B , TUSB8042A , TUSB8044 , TUSB8042 , TUSB8043 , TUSB8040 , TUSB8043A
USB 2.0 high speed signal quality (eye diagram) testing requires a USB port to send a USB 2.0 test packet…
I have various interfaces in my system I would like to protect against system-level ESD, could you provide some recommendations for me including for USB, push-button, HDMI, Ethernet?
Other Parts Discussed in Thread: DS90UB933-Q1 , TVP5150AM1 , TVP5150 Hi,
I would like to know if there is a IC that convert analog video (PAL/NTSC/..) to parallel 10/12 bit?
Thanks
Shmuel
Part Number: DS90UB940-Q1
Hi experts,
1. 940 has link error counter which can monitor link error number. Could you please help to explain what kind of error can be taken as a link error? Datasheet states clk0, clk1 and DCA are monitored for link errors…
Part Number: DS90UB913A-Q1
Hi Team,
I just wanted to confirm that a 913/933 pair can be used for 8 bit YUV-8 data format.
I figure we can just run in 10 bit mode and only connect DIN[0:7] and leave the rest open. Let me know if there there are…
