Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: TDA4VM
-1-
Are you aware of any threads where calculation of DMIPS for an algorithm is discussed for TDA4VM ?
-2-
I see in TRM “One dual-core 64-bit Arm Cortex-A72 microprocessor subsystem at up to 2.0 GHz and up to 24K DMIPS”
24K…
Part Number: TDA4VM
For the following SoCs:
AM57x
DRA6x
DRA7x
DRA8x
TDA2x
TDA3x
TDA4x
(And probably any other SoC created by TI, all of which use similar styles of solder balls)
FAQ: How much pressure is allowed to be placed onto…
Part Number: TDA4VM
Hi,
Section “6.3.3.2” of TDA4VM TRM states:
“ In split mode, each R5F core works completely independent from the other (asymmetric multi-processing, or AMP). Each core uses its own RAMs and interfaces, with no coherence between…
Part Number: AM6442
I am designing a system with a Sitara multicore device (e.g., AM24x, AM64x, AM65x). The processor needs to complete certain activities within a set cycle time. How do I design my system to make sure that I can meet that cycle time…
Part Number: TDA4VM Other Parts Discussed in Thread: CSD , DRA829 , , DRA821
Typically eMMC boot happens from boot0 partition. Can we boot from boot1 partition of eMMC? If yes how to achieve the boot1 partition booting
Part Number: 66AK2E02
How to update the firmware for XDS200 On-board debug emulator in the K2E Family( 66AK2E02 and 66AK2E05 ) and the C6657 family (C6652, C6654, C6655, and C6657)?
Part Number: TDA4VM Adapt the multi-cam demo with dual graph (i.e. the first graph has just the capture node and the second graph has the rest of the processing nodes)
