This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [H] High-Speed Amplifiers ADC Driver Amplifier Circuits

Frequently Asked Questions: Amplifiers >> High Speed Amplifiers >> ADC Driver Circuits
Circuit Design Considerations Transimpedance Amplifier Circuits Fully Differential Amplifier Circuits ADC Driver Circuits Other Op Amp Circuits
Stability Input/Output Limitations PCB Layout Guidelines Simulation & Modeling Power, Thermal, Quality, & Manufacturing

  

    


ADC Driver Amplifier Circuits


Related Content:

ADC Input Protection

Analog Front-End Design With Texas Instruments’ Tooling Landscape

TIGAR (Texas Instruments Graphical Evaluation of ADC Response Tool)

Attenuator Amplifier Design to Maximize the Input Voltage of Differential ADCs

16-bit settling for your high-throughput data acquisition system

2 steps to achieve 16-bit settling for your high-throughput data-acquisition system

Antialiasing filter circuit design for single-ended ADC input using fixed cutoff

Using single-supply fully diff. amps with neg. input voltages to drive ADCs

Circuit for differential output from a single-ended precision DAC

High Dynamic-Range Headphone Driver for DACs Design Guide

ADC32RF45: Amplifier to ADC Interface

Setting a Constant Common-Mode Voltage for Fully-Differential SAR ADC Inputs

High-input impedance, true differential, AFE attenuator circuit for SAR ADCs

Inverting circuit for high-to-low voltage level translation to drive ADC

Driving a low-voltage single-ended SAR ADC circuit with high-voltage input

Reducing amplifier power consumption for SAR ADC drivers

 

Top E2E FAQs and Posts:

[FAQ]: FDA Device Selection Guide

THS4541: THS4541 as ADC driver: induces DC offset on the input signal

THS3217: High Linearity DAC driver

THS4551: How to achieve the highest signal to noise ratio for a high gain (G = 50) 16 bit ADC application

OPA354: Where to add gain for a SAR driver?

LMH6518: LMH6518 interfacing to THS4541

I-V stage calculations

THS4503: THS4503 application question