Texas Instruments (TI) Power management support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search power management IC content or ask technical support questions on everything from linear and DC/DC switching regulators to battery management and LED drivers. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TPS922051: Design considerations to support low output current

    Part Number: TPS922051 Tool/software: Design considerations to support low output current

  • [FAQ] TPS923651: How to design the inductors for TPS923651 / 0?

    Part Number: TPS923651 Other Parts Discussed in Thread: TPS923650 Tool/software: How to design the inductors for TPS923651 / TPS923650?

  • [FAQ] LP5814: How to solve NACK when send I2C command to LP5814 / LP5815 / LP5816 / LP5817

    Part Number: LP5814 Other Parts Discussed in Thread: LP5816 , LP5817 , LP5815 Tool/software: Four steps to solve the I2C NACK, Hardware check Device I2C slave address check Real output I2C data bits check SCL / SDA high low level check …

  • [FAQ] TPS922051: How to support time multiplex in color-mixing application

    Part Number: TPS922051 Tool/software: How to support time multiplex in color-mixing application with TPS922051/0?

  • [FAQ] BQ25611D: What is the function of the /QON pin on BQ2561x?

    Part Number: BQ25611D Other Parts Discussed in Thread: BQ25619 , BQ25618 , Tool/software: The /QON pin has multiple functions on the BQ25611D, BQ25618/E, and BQ25619/E and is pulled up internally. The only thing connected to this pin should be some switch…

  • [FAQ] BQ25611D: Why do I have to read the fault status twice to see the cleared fault on BQ2561x?

    Part Number: BQ25611D Other Parts Discussed in Thread: BQ25619 , BQ25618 , Tool/software: When a fault occurs on BQ2561x an /INT pulse is sent to the host. For the BQ25611D, BQ25618/E, and BQ25619/E the fault status in REG0x09[7:0]/REG0x0A[6:4] are…

  • [FAQ] BQ25611D: What is ship mode and how do I enter and exit it in BQ2561x?

    Part Number: BQ25611D Other Parts Discussed in Thread: BQ25619 , BQ25618 , Tool/software: The BQ2561x has a mode to minimize quiescent current for the BQ25611D, BQ25618/E, and BQ25619/E from the battery in cases when the system load is not needed to be…

  • [FAQ] BQ25611D: How do I set the temperature range I desire using the TS pin on BQ2561x?

    Part Number: BQ25611D Tool/software: The BQ2561x TS pin is used to monitor the battery temperature via a thermistor with a pull-up and pull-down resistor. As the two resistors represent two unknowns when designing the TS circuit, only two temperature…

  • [FAQ] TPS923651: How to design the CSP and CSN pin components for TPS923651 / 0

    Part Number: TPS923651 Tool/software: How to design the CSP and CSN pin components for TPS923651 / 0?

  • [FAQ] TPS922051: How to design the CSP and CSN pin components for TPS922051 / 0

    Part Number: TPS922051 Tool/software: How to design the CSP and CSN pin components for TPS922051 / 0?

View FAQ threads