[FAQ] TDA4VM: Latest FAQs on TDA4

Karan Saxena

Part Number: TDA4VM
Other Parts Discussed in Thread: TDA4VL, AM69, TDA4VH, , J784S4XEVM, TDA4VEN-Q1, PROCESSOR-SDK-AM57X, PROCESSOR-SDK-J722S, INA226, AM67, AM5718, TDA4VL-Q1, J721S2XSOMXEVM, , AM5728, TDA4VE-Q1, SK-AM69, SK-AM68, AM68A, AM69A, AM67A, TDA4VH-Q1, TDA4AH-Q1, J722SXH01EVM, J721EXCPXEVM, , DRA821, SYSCONFIG, 66AK2H12, TMS320C6657, TMS320C6678, 66AK2E05, 66AK2H14, PROCESSOR-SDK-J721E, DRA829, TDA4AL-Q1, EDGE-AI-STUDIO, J721EXSOMXEVM, 66AK2G12, EVMK2GX, PROCESSOR-SDK-C667X, PROCESSOR-SDK-K2H, PROCESSOR-SDK-TDAX, 66AK2H06, EVMK2EX, DRA71XEVM, AM6548, TDA2, DRA829V, DRA821U, SYSBIOS, UNIFLASH, PROCESSOR-SDK-J7200, AM5729, PROCESSOR-SDK-AM65X, AM5748, TDA2PXEVM, PROCESSOR-SDK-C665X, PROCESSOR-SDK-K2E, TDA2E, TDA2SX

This thread will summarize the latest FAQs on TDA4 on a quarterly basis – these are usually the most viewed threads and augment the SDK collateral.

To make the navigation easy, we have also added the domain to help you find the FAQs easily.

Most update list of FAQs can be found at this link
SDK collateral is still the first place to get all the information:
There are other FAQs also present in the SDK collateral itself keep these links handy:

over 4 years ago

0 Karan Saxena over 2 years ago

TI__Guru* 77594 points

2025 FAQs
#	FAQ Title	E2E link	Domain	SoC
1	How to Set PCIe0 Transmitter De-emphasis?	https://e2e.ti.com/f/791/t/1427955	PCIe	TDA4VL/AL
2	How to boot from EMMC without SD Card and boot from SD card as well	https://e2e.ti.com/f/791/t/1459027	eMMC	AM69
3	Multicore MCAL support on MCU1_0 and MCU1_1 SPI driver	https://e2e.ti.com/f/791/t/1460834	SPI	TDA4x
4	How to run GStreamer pipeline with RTSP source	https://e2e.ti.com/f/791/t/1461875	GStreamer	TDA4x, AM6x
5	How to Enable Out of Place authentication in SBL	https://e2e.ti.com/f/791/t/1463920	Secure Boot	TDA4x
6	Running SDL applications on Freertos/Safertos	https://e2e.ti.com/f/791/t/1464187	SDL, Safertos, Freertos	TDA4VH
7	Non-sequence camera connection for multi_cam_demo_app	https://e2e.ti.com/f/791/t/1465814	vision_apps	TDA4VM
8	How to copy boot files to eMMC boot0/boot1 and set the partconf and bootbus values from Linux space instead of user space.	https://e2e.ti.com/f/791/t/1466421	eMMC	AM69
9	How to enable Second DSS Instance	https://e2e.ti.com/f/791/t/1466463/	DSS	TDA4AEN
10	J784S4XEVM: How to revert the DDR configuration to 9.2 SDK settings	https://e2e.ti.com/f/791/t/1467512/	DDR	J784s4
11	How to enable second DSI instance on J721S2 device.	https://e2e.ti.com/f/791/t/1468944	DSS	J721S2
12	How to configure PSLC in eMMC.	https://e2e.ti.com/f/791/t/1469551	eMMC	J721S2
13	Custom DDR Memory Mapping for Vision Applications on Jacinto SoCs	https://e2e.ti.com/f/791/t/1452211	DDR/ Vision_Apps	TDA4x
14	TDA4VEN-Q1: How to enable, troubleshoot, and debug MCAN, CAN-FD interface not working in Linux	https://e2e.ti.com/f/791/t/1474001	MCAN	TDA4x
15	Patches and scripts for the SRV optimization App note	https://e2e.ti.com/f/791/t/1430232	Vision apps/ Boot time	TDA4VM
16	File based input in app_multi_cam	https://e2e.ti.com/f/791/t/1475694	vision_apps	TDA4VM
17	How Do I Fix Stream FIFO Overflow Errors in the CSI2RX Linux Driver with NUM_PIXELS?	https://e2e.ti.com/f/791/t/1476091	CSI2RX / Linux	AM69
18	QNX SDK: Failure to Build 10.1 Release: PROCMGR_AID_KEYDATA undeclared	https://e2e.ti.com/f/791/t/1476690	QNX SDK	TDA4X
19	PROCESSOR-SDK-AM57X: Why is my Linux image from SDK 09.03.06.05 crashing?	https://e2e.ti.com/f/791/t/1479277	Linux	AM57x
20	PROCESSOR-SDK-J722S: Fixes to resolve random crash on J7AEN device for the SDK upto SDK10.1	https://e2e.ti.com/f/791/t/1480108	Linux	J7AEN
21	LBIST HW POST registers analysis	https://e2e.ti.com/f/791/t/1480804	HWPOST	J784s4, J721s2
22	How to view TIOVX_OBJ_DESC_MEM usage in performance statistics	https://e2e.ti.com/f/791/t/1485252	vision_apps / tiovx	TDA4VH
23	DA4AEN-Q1: How to measure power consumption on Linux using the on board INA226	https://e2e.ti.com/f/791/t/1486644	Power measurements	TDA4AEN/AM67 EVM
24	J722SEVM:PDK 10.0 SBL EMMC DRIVER BUGS	https://e2e.ti.com/f/791/t/1490034	eMMC	J722SEVM
25	Runtime configuration of Global Alpha value of a video pipe from openVX control command	https://e2e.ti.com/f/791/t/1490274	video_io / dss	J721S2
26	OSPI FLASHING USING DFU cum DFU Issues	https://e2e.ti.com/f/791/t/1490676	DFU using OSPI	J784S4
27	How do I control the quality of service (QoS) and class of service (CoS) settings on TDA4 devices to balance transaction loads and priorities?	https://e2e.ti.com/f/791/t/1493275	QoS	J784S4
2024 FAQs
#	FAQ Title	E2E link	Domain	SoC
1	ECC Test for SDL_MCU_CPSW0_ECC_AGGR fails on HS device	https://e2e.ti.com/f/791/t/1308278	ECC, SDL, CPSW	TDA4VL
2	Types of ECC Aggregators, RAM IDs and Error Injection	https://e2e.ti.com/f/791/t/1310234	ECC, SDL	TDA4x
3	TDA4VM: Unable to activate the Parameter "Eth_GetMdioEnableInterrupt", which results compilation Error of MACL ETH Driver.	https://e2e.ti.com/f/791/t/1313395	MCAL ETH	TDA4x
4	AM5718: device tree tutorial	https://e2e.ti.com/f/791/t/1313915	Linux, Device Tree	AM57x, TDA4x
5	TDA4VL-Q1: J721S2XSOMXEVM: Routing PCIe reference clock externally	https://e2e.ti.com/f/791/t/1316211	PCIe	TDA4VL
6	TDA4VL-Q1: How do I update the GPU driver on TDA4x devices?	https://e2e.ti.com/f/791/t/1316761	GPU	TDA4x, AM6x
7	TDA4VL-Q1: What are the GPU driver bug fixes for SDK 8.6 or earlier?	https://e2e.ti.com/f/791/t/1316731	GPU	TDA4x, AM6x
8	TDA4VM: DMIPS Calculation for Cortex R5F	https://e2e.ti.com/f/791/t/957259	Performance	TDA4x, AM6x
9	TDA4VM: Clarification on DMIPS calculation for A72	https://e2e.ti.com/f/791/t/1090286	Performance	TDA4x, AM6x
10	SK-TDA4VM: How to build and compile tiovx on board	https://e2e.ti.com/f/791/t/1312348	TIOVX	TDA4x
11	How to configure RGMII clock delay on J7 devices?	https://e2e.ti.com/f/791/t/1319345	Ethernet	TDA4x
12	How to enable CAN along with linux on MCU2_1 using Main Domain CAN0 instance	https://e2e.ti.com/f/791/t/1320426	CAN+Linux	TDA4VM
13	Fix: Incorrect functionality of SDL RTI example/test application on SDK 8.6, SDK 9.0 and SDK 9.1	https://e2e.ti.com/f/791/t/1320581	RTI, SDL	TDA4x
14	SK-TDA4VM: How to enable SPIDEV on SK-TDA4VM?	https://e2e.ti.com/f/791/t/1322931	SPI	SK-TDA4VM
15	AM5728: How do I setup the AM572x CPSW in switch-mode?	https://e2e.ti.com/f/791/t/1323658	CPSW	AM57x
16	TDA4VE-Q1: SDK9.1 GPU : OpenGL EGL returns 0x300c	https://e2e.ti.com/f/791/t/1327002	GPU	TDA4VE
17	SK-AM68: Enabling Arducam V3Link Camera kit on SK-AM68 and SK-AM69	https://e2e.ti.com/f/791/t/1328512	Edge AI, Fusion	AM68A, AM69A, AM67A
18	TDA4VL-Q1: How to generate downstream PCIe interrupt from RC to EP	https://e2e.ti.com/f/791/t/1329184	PCIe	TDA4VL
19	How do I get a valid param.yaml file for my TIDL deep learning model? The demos in edgeai-gst-apps throw errors on my model	https://e2e.ti.com/f/791/t/1329198	Edge AI	TDA4VM, AM69A, AM68A
20	How to resolve Import error with DEIT (Transformer) at PSDK 9.1 J784S4	https://e2e.ti.com/f/791/t/1329460	TIDL, Deep Learning, EdgeAI	TDA4x. AM6x
21	How to profile a GPIO toggled ISR , any example?	https://e2e.ti.com/f/791/t/1330596	GPIO	TDA4VL
22	How do I enable MAC Port based broadcast/multicast rate limiting?	https://e2e.ti.com/f/791/t/1330633	CPSW (ETHFW)	TDA4x
23	How to realise the whitelist based on the bind of mac and ip?	https://e2e.ti.com/f/791/t/1295305	ETHFW (CPSW)	TDA4x
24	TDA4VEN-Q1: How to build MCU + SDK on windows	https://e2e.ti.com/f/791/t/1331833	MCU+SDK	TDA4 - Entry
25	TDA4VL-Q1: Run vision_apps in SBL boot flow with BootApp image	https://e2e.ti.com/f/791/t/1332298	SBL Boot App	TDA4VL
26	CDD_IPC_APP_RC_LINUX example for J784S4 is not present in SDK 9.1 ?	https://e2e.ti.com/f/791/t/1333580	CDD IPC	TDA4VH
27	TDA4VH-Q1: DDR_SHARED_MEM alignment requirement for RAT configuration	https://e2e.ti.com/f/791/t/1327043	Vision_apps	TDA4VH
28	How to enable/use wake-up domain UART for collecting EthFw debug logs? when we not have Main Domain UART on Board.	https://e2e.ti.com/f/791/t/1335009	ETHFW IPC (enabled MAIN UART2 from mcu1_0 ipc examples)	TDA4x
29	How do I build the 08.02.01.00 SDK using Yocto?	https://e2e.ti.com/f/791/t/1339123	Yocto	AM57xx
30	How to switch channels using the mosaic node	https://e2e.ti.com/f/791/t/1340465	Vision_apps	TDA4x
31	Adding my own software program and build on the EVM	https://e2e.ti.com/f/791/t/1325797	TIOVX	TDA4x
32	What changes are required in Ethernet Firmware to remove gPTP support and forward the gPTP frames to the Ethernet Client?	https://e2e.ti.com/f/791/t/1340678/	ETHFW	TDA4x
33	TDA4VM: INTERNAL - How can I correlate TDA4x part numbers, AM6x part numbers, and J7x part numbers?	https://e2e.ti.com/f/791/t/1340823	Parts number/Getting started	TDA4x, DRA8x, AM6x, J7x
34	SK-TDA4VM: Why does Encoding Fail in TDA4VM-SK Edge-AI 9.1 SDK?	https://e2e.ti.com/f/791/t/1343426	Multimedia CODEC	SK-TDA4VM
35	TDA4VL-Q1: Change GTC Clock frequency to 200MHz for SBL boot flow	https://e2e.ti.com/f/791/t/1343498	GTC	TDA4VL
36	J784S4XEVM: Enable USB3.0 functionality on lane 2 of TDA4VH	https://e2e.ti.com/f/791/t/1344108	USB	TDA4VH
37	J784S4XEVM: Demo application to show the usage of the read and write TISCI API for extended OTP efuse	https://e2e.ti.com/f/791/t/1344536	SBL	TDA4VH
38	How can I forward the packet received on one external port to another port of CPSWnG with a different VLAN ID?	https://e2e.ti.com/f/791/t/1347777	EthFW	TDA4x
39	SK-TDA4VM: Enable the DFU boot mode in SK-TDA4VM.	https://e2e.ti.com/f/791/t/1347983	USB-DFU	SK-TDA4VM
40	How to leverage edgeai-tidl-tool's Advanced Examples for custom model compilation ?	https://e2e.ti.com/f/791/t/1349425	EdgeAI, TIDL	AM68A, AM68PA, AM69A
41	Demystifying TIDL myths	https://e2e.ti.com/f/791/t/1349463	EdgeAI, TIDL	AM68A, AM68PA, AM69A
42	TDA4VH-Q1: Extending SDL CCM example to the Main Domain R5Fs	https://e2e.ti.com/f/791/t/1350179	SDL, CCM, R5F	TDA4VH
43	Details/information about CPSW instances supported in J7 devices and software supported from TI SDK.	https://e2e.ti.com/f/791/t/1350320	CPSW	TDA4x
44	PROCESSOR-SDK-AM57X: Is there a new AM57x SDK?	https://e2e.ti.com/f/791/t/1352690	SDK	AM57x
45	J721S2XSOMXEVM: How to unlock the JTAG using TISCI API ?	https://e2e.ti.com/f/791/t/1353151	SBL	TDA4X
46	TDA4AH-Q1: CDD IPC App example running on MCU1_0 communicating with another R5 core	https://e2e.ti.com/f/791/t/1356059	CDD IPC	TDA4VH
47	TDA4VL-Q1: CDD IPC App example running on MCU1_0 communicating with another R5 core	https://e2e.ti.com/f/791/t/1356063	CDD IPC	TDA4VL
48	How to address the assertion Issue from EthFw, due to race condition between multiple client requests for EnetMcm Module Server Task	https://e2e.ti.com/f/791/t/1357709	ETHFW	TDA4x
49	TDA4VH-Q1: Analysis on Latency Wave521CL CODEC IP (Linux)	https://e2e.ti.com/f/791/t/1358638	Multimedia CODEC	TDA4VH
50	TDA4VH-Q1: Performing ECC SEC/DED tests on R5F cache memories	https://e2e.ti.com/f/791/t/1360109	R5F, ECC	TDA4VH
51	How do I port the enet loopback example for CPSW2G to another core like MCU2_0?	https://e2e.ti.com/f/791/t/1367319	ENET	TDA4Vx
52	TDA4VH-Q1: How to configure the Wave521CL VPU clock? (Linux)	https://e2e.ti.com/f/791/1371232	Multimedia CODEC	TDA4VH, TDA4VL
53	TDA4VM: Image freezes when trying to save ldc images in demo 'app_multi_cam'	https://e2e.ti.com/f/791/t/1370179	Vision_apps	TDA4x
54	TDA4VM: How do I resolve these compilation errors when building PDK examples?	https://e2e.ti.com/f/791/t/1372830/	PDK	TDA4x
55	TDA4VH: How do we enable all eight(8) external ports of CPSW9G in TDA4VH using TI EVM?	https://e2e.ti.com/f/791/t/1373202	CPSW Driver Linux	TDA4VH
56	How do we avoid UDMA resource conflict issues when integrating the MCAL Eth module with other modules?	https://e2e.ti.com/f/791/t/1373220	MCAL ETH	TDA4x
57	TDA4VH-Q1: Achieving Functional Safety with Boot	https://e2e.ti.com/f/791/t/1375450	SDL, PDK BootApp, BIST, VTM, POK, TOG	TDA4VH
58	Rebuilding the NOR-writer code	https://e2e.ti.com/f/791/t/1380319	Nor writer tool	Keystone 1 and II
59	TDA4VH-Q1: How to change the ATF to print on MCU_UART in SBL bootflow	https://e2e.ti.com/f/791/t/1386230	ATF	TDA4VH
60	SK-TDA4VM: No graphics acceleration on SDK 9.x in Wayland (weston)	https://e2e.ti.com/f/791/t/1387247	GPU, Wayland, Performance, Driver	TDA4VM
61	J722SXH01EVM: Attempt to connect to XDS110 failed (on-board USB debugger)	https://e2e.ti.com/f/791/t/1391752	XDS110, CCS	TDA4AEN
62	How do I use GPIO interrupts in PDK and how are they routed?	https://e2e.ti.com/f/791/t/1392363	GPIO	TDA4x
63	J722SXH01EVM: How to enable OSPI NAND & NOR boot on 9.2 Linux SDK	https://e2e.ti.com/f/791/t/1352670	OSPI - NAND/NOR	J722s
64	TDA4VH-Q1: Enabling QUAD Ethernet Communication on TDA4VH TI EVM	https://e2e.ti.com/f/791/t/1398550	Ethernet	TDA4VH
65	TDA4VM: How to use uEnv.txt to configure u-boot env when using OSPI as boot media.	https://e2e.ti.com/f/791/t/1400212	u-boot, OSPI	TDA4x
66	J784S4XEVM: How to create EXT4 rootfs on UFS and boot to Linux using UFS	https://e2e.ti.com/f/791/t/1406714	UFS as rootfs	J784S4
67	TDA4VM: How to run ETHFW without connecting GESI card to J721EXCPXEVM for TDA4VM/J721E?	https://e2e.ti.com/f/791/t/1408971	Ethernet	TDA4VM
68	TDA4VM: How do I build the native IgH EtherCAT stack for TI microprocessors?	https://e2e.ti.com/f/791/t/1409114	EtherCAT	TDA4VM
69	SK-TDA4VM: How do I set up TFTP and NFS for Linux?	https://e2e.ti.com/f/791/t/1411644	tftp and nfs	TDA4VM
70	How to flash Keywriter image over JTAG ?	https://e2e.ti.com/f/791/t/1413700	Keywriter	J721S2
71	TDA4VH-Q1: FuSa Collateral	https://e2e.ti.com/f/791/t/1414736	FuSa, BIST, ECC, SW Register Readback	TDA4VH
72	PROCESSOR-SDK-AM57X: U-boot patch for Linux addressing AM57xx errata i2446	https://e2e.ti.com/f/791/t/1416047	PRU-ICSS	AM57x
73	How to load TIFS using JTAG on HS-FS device?	https://e2e.ti.com/f/791/t/1418335	TIFS,SBL	TDA4VH
74	TDA4VM-Q1: How do we set/configure a specific MAC address for an ETHFW virtual client?	https://e2e.ti.com/f/791/t/1419991	ETHFW, Clients	TDA4Vx
75	TDA4VL-Q1: Decode H264 and H265 data using V4L2 and Display the same using RTOS driver	https://e2e.ti.com/f/791/t/1420881	Vision_apps	TDA4VL
76	[FAQ] TDA4VH-Q1 and TDA4VL-Q1: Errata i2437 - Streaming Engine (SE) Clock-Gating Turning Off Too Early: Background and Workaround	https://e2e.ti.com/f/791/t/1423683	C7x	TDA4VL, TDA4VH
77	SK-AM69: How to stream from CSI sensor and USB camera to display using GStreamer?	https://e2e.ti.com/f/791/t/1427869	GStreamer	TDA4VM, AM68A AM69A AM67
78	TDA4VM-Q1: TIDL back port guide including SDK 9.x and SDK 10.x	https://e2e.ti.com/f/791/t/1436565	TIDL	TDA4VM
79	TDA4VH-Q1: Details on the MCU_SAFETY_ERRORn and SOC_SAFETY_ERRORn pins	https://e2e.ti.com/f/791/t/1443473	Safety, SDL, ESM	TDA4Vx
80	TDA4VH-Q1: How to map the ECC Aggregators to corresponding ESM events?	https://e2e.ti.com/f/791/t/1445039	SDL, ESM, ECC	TDA4Vx
81	TDA4VL-Q1: Recommendations for testing ECC error injection	https://e2e.ti.com/f/791/t/1445048	SDL, ECC	TDA4Vx
82	TDA4VH:Enable saveenv feature in SDCARD , eMMC and a workaround for saveenv in OSPI flash.	https://e2e.ti.com/f/791/t/1448106	Uboot	TDA4VH
83	AM67A: Enabling CSI2 sensors via fusion board on AM6x	https://e2e.ti.com/f/791/t/1452909	CSI, Fusion	TDA4x, AM6x
84	TDA4VL-Q1: ECC Testing Procedure for Inaccessible RAM IDs	https://e2e.ti.com/f/791/t/1453400/	SDL, ECC	TDA4VL
85	TDA4VH-Q1: ECC Testing Procedure for Inaccessible RAM IDs	https://e2e.ti.com/f/791/t/1453389/	SDL, ECC	TDA4VH
86	How to adjust ALE classifier/policer partition in ETHFW	https://e2e.ti.com/f/791/t/1454988	ETHFW	TDA4VH, TDA4VM, DRA821
87	How to fix the communication failure on CPSW Port-8 in Native Linux Driver on SDK version 8.6 and below.	https://e2e.ti.com/f/791/t/1455743	Native Ethernet Driver - Linux	TDA4VM, TDA4VH
88	How to get remote cores trace log data into QNX debug terminal.	https://e2e.ti.com/f/791/t/1455940	Remote core trace log to QNX	TDA4VM, TDA4VL, TDA4VH, DRA821
2023 FAQs
#	FAQ Title	E2E link	Domain	SoC
1	CPSW9G Ethernet switch not working out-of-the box SDK 8.5 onwards	https://e2e.ti.com/f/791/t/1183717	Ethernet, CPSW9G	TDA4x, DRA82x
2	How to change default timer in FreeRTOS/SafeRTOS	https://e2e.ti.com/f/791/t/1183389	FreeRTOS/SafeRTOS	TDA4x
3	TDA4VM: K3 ResPart Tool fails to open on SDK 8.5	https://e2e.ti.com/f/791/t/1184455	SysConfig, K3 ResPart Tool	TDA4VM/J721E DRA821/J7200, TDA4VL/J721S2
4	EVMK2G: How to run GPIO Examples for DSP core on K2G EVM	https://e2e.ti.com/f/791/t/1184200	Getting started	Keystone 1/2
5	How to change eDP driver for the different sysclk0 input?	https://e2e.ti.com/f/791/t/1185013	DSS	TDA4
6	How to create multiple rootfs like partition of emmc ?	https://e2e.ti.com/f/791/t/1185543	uboot	TDA4
7	C7x compiler status on address beyond +/- 2GB	https://e2e.ti.com/f/791/t/1186433	C7x compiler	TDA4
8	66AK2H12: "Quick start Guide for K2H - EVM " to enable a quick product development ?	https://e2e.ti.com/f/791/t/1188791	Getting started	Keystone 1/2
9	TMS320C6657: How to calculate the "DDR3 Interface – Registers" for Keystone I devices and Test/Debug on Keystone I EVM.	https://e2e.ti.com/f/791/t/1189685	Getting started	Keystone 1/2
10	TMS320C6678: How to rebuild the IBL of Processor SDK 6.3 in Windows Environment?	https://e2e.ti.com/f/791/t/1190072	Getting started	Keystone 1/2
11	66AK2E05: How to run OOB Demo on K2E / K2H Keystone-II Devices ?	https://e2e.ti.com/f/791/t/1191353	Getting started	Keystone 1/2
12	66AK2H12: Master List of all the FAQs of Keystone-I and II devices such as C6657, C6678, K2E and K2H.	https://e2e.ti.com/f/791/t/1192670	Getting started	Keystone 1/2
13	TDA4VM: SBL OSPI boot error: Invalid magic number in Single image header	https://e2e.ti.com/f/791/t/1192888	OSPI boot	TDA4
14	TDA4VM: SDL LBIST POST Timeout	https://e2e.ti.com/f/791/t/1194872	SDL	TDA4
15	How to reduce the usage of number of rings in VHWA drivers?	https://e2e.ti.com/f/791/t/1195133	VHWA	TDA4
16	TMS320C6678: Static IP Configuration using PDK	https://e2e.ti.com/f/791/t/1196090	Getting started	Keystone 1/2
17	Integrating latest SafeRTOS release with SDK-8.2	https://e2e.ti.com/f/791/t/1198044	SafeRTOS	TDA4
18	TDA4 Drive Strength Controls	https://e2e.ti.com/f/791/t/1200155	IO	TDA4
19	How to enable trace and assert in VHWA drivers?	https://e2e.ti.com/f/791/t/1200386	VHWA	TDA4
20	TDA4VM: Ability to change boot mode in SW	https://e2e.ti.com/f/791/t/1200583	Boot mode	TDA4
21	TDA4VM: Does SDK8.5 MCAL CDDIPC supports communication with A72 running Linux ?	https://e2e.ti.com/f/791/t/1201356	CDD IPC	TDA4VM
22	66AK2H14: I2C Boot Parameter Table correction in datasheet, SPRS866G	https://e2e.ti.com/f/791/t/1201776	Getting started	Keystone 1/2
23	How to fit the boot images within 4MB of emmc boot partion while flashing using dfu?	https://e2e.ti.com/f/791/t/1203212	Emmc Boot	TDA4VM
24	How to do a MAC loopback test with CPSW in TDA4/DRA8 devices	https://e2e.ti.com/f/791/t/1203408	Ethernet, CPSW	TDA4x, DRA82x
25	DSS M2M support on TDA4VH	https://e2e.ti.com/f/791/t/1007456	DSS	TDA4VH
26	How to print the ALE table for CPSW in TDA4/DRA8 devices	https://e2e.ti.com/f/791/t/1204394	Ethernet, CPSW	TDA4x, DRA82x
27	TDA4VM: Explain why VRING_BASE_ADDRESS = 0xAA000000 and IPC_VRING_BUFFER_SIZE = 0x1C00000U	https://e2e.ti.com/f/791/t/1205711	IPC	TDA4VM
28	How to disable serdes from Linux to enable serdes configuration from Ethfw and Enet lld	https://e2e.ti.com/f/791/t/1208183	Ethernet, CPSW	TDA4x, DRA82x
29	TDA4VM: K3conf: Capabilities with options(help)	https://e2e.ti.com/f/791/t/1209211	K3conf	TDA4x
30	TDA4VM: How to load sysFw from ROM in SBL boot flow	https://e2e.ti.com/f/791/t/1207853	SBL	TDA4Vx
31	TDA4VM: How to forward Broadcast frames to HLOS (QNX) running on A72 by default ?	https://e2e.ti.com/f/791/t/1210631	Ethernet	TDA4VM
32	TDA4VM: Run vision_apps in SBL boot flow with combined_appImage	https://e2e.ti.com/f/791/t/1210640	SBL	TDA4VM
33	PROCESSOR-SDK-J721E: CDD_IPC_APP_RC_LINUX does not build on Processor SDK RTOS 8.2 for the core MCU 2_1	https://e2e.ti.com/f/791/t/1125865	CDD IPC	TDA4VM
34	TDA4VL-Q1: Run vision_apps in SBL boot flow with combined_appImage	https://e2e.ti.com/f/791/t/1214665	SBL	TDA4VL
35	TDA4AEP: How to enable QoS for DSS in SBL or in SPL bootflow?	https://e2e.ti.com/f/791/t/1214683	QoS	TDA4VL
36	TDA4: How to interface eDP with the external serializer	https://e2e.ti.com/f/791/t/1215555	DSS	TDA4
37	How to add/map MAC-only port to A72 (Linux) client in Ethernet Firmware + Linux Use Case?	https://e2e.ti.com/f/791/t/1215638	Ethernet	TDA4VM
38	How is the EVM(board) to device tree mapped? How are the peripherals organized in a device tree?	https://e2e.ti.com/f/791/t/1215934	Device Tree	TDA4
39	TDA4VM: How to change the MAC-only port mapped to A72 (Linux) client in Ethernet Firmware + Linux Use Case?	https://e2e.ti.com/f/791/t/1216154	Ethernet	TDA4VM
40	J7200XSOMXEVM: How do I enable CAN with Linux driver on J7200?	https://e2e.ti.com/f/791/t/1216687	Can, Device Tree, Linux	J7VCL/J7200
41	How can I analyze a GPU (Graphics Process Unit) driver or hardware issue?	https://e2e.ti.com/f/791/t/1218307	GPU, PVR Carbon	TDA4x, AM6x (including Sitara)
42	TDA4VM: How do I port an R5F RTOS Ethernet client running on MCU2_1 to other R5F cores (ex: MCU3_0 core) in SoCs with multiple R5F cores?	https://e2e.ti.com/f/791/t/1217969	Ethernet	TDA4VM
43	TDA4VM: Are there any known bugs and patches that I should use in my GPU driver?	https://e2e.ti.com/f/791/t/1218318	GPU	TDA4VM
44	SK-TDA4VM: How to use ISP as extra colorconvert module to convert to UYVY format using GStreamer?	https://e2e.ti.com/f/791/t/1219317	GStreamer, ISP	TDA4VM
45	TDA4VM: How to get CPSW Ethernet Statistics on TDA4/DRA8 devices?	https://e2e.ti.com/f/791/t/1220277	Ethernet, CPSW	TDA4x, DRA82x
46	TDA4VM: Jacinto︎ 7 processors boot flow - considerations and customizations	https://e2e.ti.com/f/791/t/1220614	Boot flow	TDA4VM, DRA829
47	TDA4VM: Sample Wayland application of OpenGL to run on TI board	https://e2e.ti.com/f/791/t/1214641	GPU, Wayland, Display	TDA4x, AM6x
48	TDA4VM: How to identify a GPIO and toggle the same	https://e2e.ti.com/f/791/t/1223248	GPIO	TDA4VM
49	TDA4xx: How to load sysFw from ROM in SBL boot flow	https://e2e.ti.com/f/791/t/1223368	SBL	TDA4VM
50	TDA4VL-Q1: How to configure DDR size of 4GB in the J721s2 SDK?	https://e2e.ti.com/f/791/t/1224003	DDR	TDA4VL
51	TDA4VM: How to boot from the emmc UDA partition in FS mode using SPL boot flow?	https://e2e.ti.com/f/791/t/1224038	Emmc	TDA4VM
52	TDA4VM: How to flash images to the EMMC Boot 0 partition using tftp?	https://e2e.ti.com/f/791/t/1224502	Emmc	TDA4VM
53	SK-TDA4VM: How to create Object Classification Reference Design using Edge Impulse platform on TDA4VM-SK	https://e2e.ti.com/f/791/t/1226533	Edge Impulse	SK-TDA4VM
54	SK-TDA4VM: How to create Object Detection Reference Design using Edge Impulse platform on TDA4VM-SK	https://e2e.ti.com/f/791/t/1226588	Edge Impulse	SK-TDA4VM
55	SK-TDA4VM: Error while running custom compiled model	https://e2e.ti.com/f/791/t/1227571	EdgeAI, Custom Model Inference	SK-TDA4VM
56	SK-TDA4VM: How to do inferencing with custom compiled model on target	https://e2e.ti.com/f/791/t/1228053	EdgeAI, Custom Model Inference	SK-TDA4VM
57	TDA4VM/TDA4VL/TDA4AL/TDA4VH/DRA821: How can we make the Jacinto SDK compatible for device variants?	https://e2e.ti.com/f/791/t/1227640	SDK	TDA4
58	TDA4VL-Q1: How can we make J721s2 superset SDK compatible for TDA4VL?	https://e2e.ti.com/f/791/t/1221081	SDK	TDA4VL
59	TDA4AL-Q1: How can we make J721s2 superset SDK compatible for TDA4AL?	https://e2e.ti.com/f/791/t/1221162	SDK	TDA4AL
60	How to check if device type is HS-SE, HS-FS or GP?	https://e2e.ti.com/f/791/t/1228618	SoC	TDA4VM/VL/VH/DRA821
61	J784S4XEVM: How to enable second PCIe slot for two SSD cards	https://e2e.ti.com/f/791/t/1230896	PCIe	J784S4/TDA4VH
62	J7200XSOMXEVM: How to change the console for keywriter	https://e2e.ti.com/f/791/t/1231088	Keywriter	J7xxx
63	How to enable the matrix GUI 2.0 for AM57x devices in Linux?	https://e2e.ti.com/f/791/t/1232377	Getting Started	AM57x
64	TDA4VM: TDA4VL : Can you list out the difference of features supported in SDK's for CDD IPC and PDK IPC ?	https://e2e.ti.com/f/791/t/1233566	IPC	TDA4VM,TDA4VL
65	TDA4VM: How to port MCAL Ethernet Virtual Mac Application supported on MCU2_1 to MCU1_0?	https://e2e.ti.com/f/791/t/1233669	MCAL Ethernet	TDA4VM
66	TDA4VM: How to inference/benchmark on TDA4VM SoC with precompiled model artifacts using edgeai-benchmark repo ?	https://e2e.ti.com/f/791/t/1235203	EdgeAI model benchmarking	SK-TDA4VM
67	EDGE-AI-STUDIO: Edge AI Resources for AM6xA SoCs	https://e2e.ti.com/f/791/t/1236957	Edge AI Studio	AM6x
68	How to use TR for transfers in McSPI, instead of packet descriptors?	https://e2e.ti.com/f/791/t/1237073	PDK	TDA4VM/VL/VH
69	TDA4VM: How to get EB Tresos studio for MCAL development and customer licence tool?	https://e2e.ti.com/f/791/t/1238147	MCAL	TDA4VM
70	TMS320C6657: How to run the direct NAND-BOOT example on TI-C6657-EVM without IBL ?	https://e2e.ti.com/f/791/t/1238130	Getting started	Keystone 1/2
71	TDA4VM: Explain IPC Mailbox allocation ?	https://e2e.ti.com/f/791/t/1238685	IPC	TDA4VM
72	TDA4VM: How to perform power benchmarking of model inference/run on TDA4VM SoC	https://e2e.ti.com/f/791/t/1239352	Power Benchmarking, Model Inference	TDA4VM
73	TMS320C6678: How to create a EDMA PING-PONG test-code using the CSL ( Chip support Library ) package and test on C6678 EVM ?	https://e2e.ti.com/f/791/t/1242663	Getting started	Keystone 1/2
74	TMS320C6678: DDR3 Read write test code (or) How to do DDR3 test on C6678 EVM or K2H EVM board ?	https://e2e.ti.com/f/791/t/1244930	Getting started	Keystone 1/2
75	RPMsg: How to add multiple endpoints to a remote core running RTOS?	https://e2e.ti.com/f/791/t/1245326	IPC	TDA4VM
76	TDA4: How to enable blending operation and two input video pipelines in DSS memory to memory path?	https://e2e.ti.com/f/791/t/1248720	DSS	TDA4
77	TDA4VM: Process OpenVX Graph while simultaneously configuring a camera	https://e2e.ti.com/f/791/t/1250032	Imaging	TDA4VM
78	How to change input display pipeline in the DSS M2M WB node?	https://e2e.ti.com/f/791/t/1251057	DSS	TDA4
79	J7200: How to change/generate the “Eth” configuration for MCAL Ethernet Application from one core to other core.	https://e2e.ti.com/f/791/t/1251728	MCAL Ethernet	J7200/DRA821
80	TDA4VM: OpenVX Host on R5F and node Target on A72 (Linux)	https://e2e.ti.com/f/791/t/1256312	OpenVX	TDA4VM
81	TDA4VM: How do I enable CAN channels on Gateway/Ethernet Switch/Industrial (GESI) expansion card when using J721E EVM from Linux A72?	https://e2e.ti.com//f/791/t/1259301	CAN	TDA4VM
82	TDA4VM: How to reduce the EthFW initialization time to avail CPSW H/W Switch functionality as soon as possible after the core boot up in Vision Apps use-case?	https://e2e.ti.com/f/791/t/1259311	EthFW In Vision Apps	TDA4VM
83	J784S4XEVM: How to enable main domain watchdog?	https://e2e.ti.com/f/791/t/1261103	Linux	J784S4/TDA4VH
84	J721S2XEVM: How to enable main domain watchdog?	https://e2e.ti.com/f/791/t/1261459	Linux	J721s2/TDA4VL
85	Where can i find MCAL configurator package and EB Tresos studio for Jacinto devices ?	https://e2e.ti.com/f/791/t/1261724	MCUSW	TDA4
86	TDA4AL-Q1: CAN Profiling Application failed to operate in Tx only or External Loopback and Polling mode or interrupt mode.	https://e2e.ti.com/f/791/t/1264462	CAN	TDA4
87	How do I bring/brought up Ethernet interfaces for CPSWnG in Linux from SDK Version 9.0 and above?	https://e2e.ti.com/f/791/t/1264445	Linux Ethernet driver	TDA4
88	J721EXSOMXEVM: How to work around errata i2086 for PCIe switches and multifunction devices for J721E/TDA4VM/DRA829?	https://e2e.ti.com/f/791/t/1264686	PCIe	TDA4VM
89	AM69: How can I assign interface ID to CAN modules	https://e2e.ti.com/f/791/t/1267036	CAN	TDA4, AM6x
90	J784S4XEVM/AM69: 8.6 SDK - GPIO Interrupts are not functional	https://e2e.ti.com/f/791/t/1272526	GPIO	J784s4/Am69
91	J721EXSOMXEVM: 9.0 SDK make U-Boot build failure	https://e2e.ti.com/f/791/t/1273477	9.0 SDK u-boot build	J7xxx
92	66AK2G12: How to create "Target configuration" and do "Test connection" on 66AK2G12 EVM	https://e2e.ti.com/f/791/t/1132676	Getting started	Keystone 1/2 devices
93	TDA4VM: Best practices for version tracking for TI’s SDK	https://e2e.ti.com/f/791/t/1133505	Getting Started	TDA4
94	EVMK2G: How to run UART Examples for DSP core on K2G EVM	https://e2e.ti.com/f/791/t/1135364	Getting started	Keystone 1/2 devices
95	66AK2H12: Booting Linux on K2H board using NFS	https://e2e.ti.com/f/791/t/1135367	Getting started	Keystone 1/2 devices
96	EVMK2GX: How to generate the CCS PDK examples for K2G processor family?	https://e2e.ti.com/f/791/t/1135633	Getting started	Keystone 1/2 devices
97	EVMK2G: How to run UART Examples for ARM core on K2G EVM	https://e2e.ti.com/f/791/t/1135670	Getting started	Keystone 1/2 devices
98	66AK2G12: How to load and run the gel file on K2G EVM?	https://e2e.ti.com/f/791/t/1136193	Getting started	Keystone 1/2 devices
99	66AK2G12: How to run McBSP loop back test on K2G EVM ?	https://e2e.ti.com/f/791/t/1136199	Getting started	Keystone 1/2 devices
100	66AK2E05: How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2E 6.3 for K2E?	https://e2e.ti.com/f/791/t/1137599	Getting started	Keystone 1/2 devices
101	66AK2H12: How to create "Target configuration" and do "Test connection" on K2H EVM	https://e2e.ti.com/f/791/t/1137984	Getting started	Keystone 1/2 devices
102	TDA4VM: PDK Interrupt registration for R5F using OSAL	https://e2e.ti.com/f/791/t/1158072	PDK	TDA4VM
103	TDA4VH: Reduction in the number of GPIOs from J7ES to J7AHP	https://e2e.ti.com/f/791/t/1160537	GPIOs	TDA4VH
104	TDA4VM: Starting openVX application automatically at Linux boot	https://e2e.ti.com/f/791/t/1165996	systemd service	TDA4VM
105	TDA4VM: How to move to Native Linux Driver on SDK 8.4 for J7 and DRA8 Devices	https://e2e.ti.com/f/791/t/1166334/	Native Linux driver	TDA4VM, TDA4VH, DRA821, Dra829
106	TDA4VM: How to run vision_apps with tisdk-tiny-image	https://e2e.ti.com/f/791/t/1166419/	TinyFS/ Vision_apps	TDA4VM
107	66AK2E05: Flashing UBI Image	https://e2e.ti.com/f/791/t/1166986	Getting started	Keystone 1/2 devices
108	TDA4VM: How to read the DDR frequency from Linux	https://e2e.ti.com/f/791/t/1169373/	DDR Frequency	TDA4VM/J72XX
109	SK-TDA4VM: How to reset the system using main domain watchdog	https://e2e.ti.com/f/791/t/1170965/	Watchdog	TDA4VM-SK
110	TMS320C6657: How to run the direct SPI-BOOT example on TI-C6657-EVM without IBL ?	https://e2e.ti.com/f/791/t/1171336	Getting started	Keystone 1/2 devices
111	TDA4VM: Steps for executing linux DSS on SDK	https://e2e.ti.com/f/791/t/1173507/	Linux Display	TDA4VM
112	TDA4VM: Steps for executing linux CSI on SDK	https://e2e.ti.com/f/791/t/1173511/	CSI linux	TDA4VM
113	TDA4VM: Run Capture - Display usecase on Linux in SDK	https://e2e.ti.com/f/791/t/1173513/	Capture-Display Linux	TDA4VM
114	66AK2E05: How to flash U-Boot and Linux kernel using Shell Scripts in Processor SDK Linux	https://e2e.ti.com/f/791/t/1173917	Getting started	Keystone 1/2 devices
115	TDA4VM: How to browse memory using CCS while running Linux.	https://e2e.ti.com/f/791/t/1175628	CCS Linux	TDA4VM
116	TDA4VM: Is HSFOSC1 external clock required	https://e2e.ti.com/f/791/t/1176475	HFOSC	TDA4VM
117	SK-TDA4VM: How do I connect the external debugger Blackhawk USB560v2 (XDS560v2) USB System Trace to the JTAG on the board?	https://e2e.ti.com/f/791/t/1178240	Getting Started	TDA4VM
118	66AK2H12: How to flash U-Boot and Linux kernel using Shell Scripts in Processor SDK Linux	https://e2e.ti.com/f/791/t/1178305	Getting started	Keystone 1/2 devices
119	66AK2H12: How to build and run the platform test on K2H EVM ?	https://e2e.ti.com/f/791/t/1180070	Getting started	Keystone 1/2 devices
120	66AK2E05: How to build and run the platform test on K2E EVM ?	https://e2e.ti.com/f/791/t/1180154	Getting started	Keystone 1/2 devices
121	TMS320C6678: How to build and run the IPC-SRIO example on C6678 EVM?	https://e2e.ti.com/f/791/t/1180856	Getting started	Keystone 1/2 devices
122	OSPI FAQ for K3 devices (Sitara/Jacinto)	https://e2e.ti.com/f/791/t/1181116	OSPI Flash	TDA4VM, DRA821
123	EVMK2GX: How to build, run and test the EMAC example on DSP core of K2G family processor	https://e2e.ti.com/f/791/t/1181262	Getting started	Keystone 1/2 devices

2022 FAQs
#	FAQ title	E2E Link	Domain	SoC
1	TDA4VM: How to boot TDA4VM from eMMC UDA partition using SBL in SDK 8.1	https://e2e.ti.com/f/791/t/1067116	PDK, SBL	TDA4VM
2	TMS320C6657: How to build and run the IPC-Image processing demo on C6657 ?	https://e2e.ti.com/f/791/t/1068379	Getting started	Keystone 1/2 devices
3	How to use DDR BIST engine for filling up pattern.	https://e2e.ti.com/f/791/t/1065508	DDR	TDA4xVM
4	TMS320C6678: How to build and run the IPC-Image processing demo on C6678 ?	https://e2e.ti.com/f/791/t/1070386	Getting started	Keystone 1/2 devices
5	TMS320C6657: How to build and run the platform test on C6657 EVM ?	https://e2e.ti.com/f/791/t/1071275	Getting started	Keystone 1/2 devices
6	TMS320C6678: How to build and run the platform test on C6678 EVM ?	https://e2e.ti.com/f/791/t/1071286	Getting started	Keystone 1/2 devices
7	TDA4VM: How to build C++ application from j721e PDK? Is there a demo example available?	https://e2e.ti.com/f/791/t/1071841	PDK, CPP Makefile	TDA4VM, DRA821
8	TDA4VM: Measuring power consumption of the device	https://e2e.ti.com/f/791/t/1072952	Power measurement	TDA4VM
9	TMS320C6678: How to flash the IBL ( Intermediate Boot loader ) into EEPROM and how to flash the application binary into NOR? How to boot the IBL + Application binary?	https://e2e.ti.com/f/791/t/1073147	Getting started	Keystone 1/2 devices
10	TDA4VM: NEON Support in PSDK QNX	https://e2e.ti.com/f/791/t/1075898	QNX, NEON	TDA4VM
11	TDA4VM: How to build SBL in debug mode j721e RTOS SDK?	https://e2e.ti.com/f/791/t/1076822	SBL	TDA4VM
12	Enable eDP display on TDA4VL/J7AEP board	https://e2e.ti.com/f/791/t/1076883	Display	TDA4VL
13	Adapt the single video camera demo to a multiple graph version	https://e2e.ti.com/f/791/t/1078116	OpenVX	TDA4VM
14	TMS320C6657: Quick start Guide C6657 and C6657-EVM	https://e2e.ti.com/f/791/t/1080748	Getting started	Keystone 1/2 devices
15	TMS320C6678: How to re-build the PDK and SDK of PROCESSOR-SDK-C667X 6.3 for C6678?	https://e2e.ti.com/f/791/t/1082229	Getting started	Keystone 1/2 devices
16	TMS320C6678: How to generate the CCS PDK examples for C6678?	https://e2e.ti.com/f/791/t/1082251	Getting started	Keystone 1/2 devices
17	TMS320C6678: Quick set up Guide C6678 and C6678-EVM	https://e2e.ti.com/f/791/t/1082264	Getting started	Keystone 1/2 devices
18	66AK2H14: How to generate the CCS PDK examples for 66AK2H14 - k2H EVM?	https://e2e.ti.com/f/791/t/1083353	Getting started	Keystone 1/2 devices
19	TDA4VM: What is the difference between SK-TDA4VM and the J721E EVM?	https://e2e.ti.com/f/791/t/1083612	Starter Kit	TDA4VM
20	TDA4VM: TDA4VM: Questions about UDMAP module register access restrictions	https://e2e.ti.com/f/791/t/1084129	UDMAP	TDA4VM
21	TMS320C6678: How to run the out-of-box demo in C6678-EVM?	https://e2e.ti.com/f/791/t/1084236	Getting started	Keystone 1/2 devices
22	Run the multi-cam demo with Dual Graph	https://e2e.ti.com/f/791/t/1084620	OpenVX	TDA4VM
23	PROCESSOR-SDK-K2H: Updating the firmware in XDS200 On-board debug emulator for EVMK2H	https://e2e.ti.com/f/791/t/1084787	Getting started	Keystone 1/2 devices
24	66AK2H12: GEL file Loading (DSP and ARM core) in K2H EVM	https://e2e.ti.com/f/791/t/1084856	Getting started	Keystone 1/2 devices
25	TDA4VM: DRA829/DRA821: How to boot from eMMC boot1 partition	https://e2e.ti.com/f/791/t/1084875	U-Boot	TDA4VM/J7200
26	66AK2H12: Target configuration in CCS for K2H	https://e2e.ti.com/f/791/t/1084886	Getting started	Keystone 1/2 devices
27	66AK2H12: UART examples for K2H EVM in DSP core	https://e2e.ti.com/f/791/t/1085792	Getting started	Keystone 1/2 devices
28	TDA4VM: Booting MCU2_1 application form SBL	https://e2e.ti.com/f/791/t/1085821	SBL, MCU2_1	TDA4VM
29	TDA4VM: Maximum pressure or force allowed on package lid of SoC	https://e2e.ti.com/f/791/t/1089203	Hardware	TDA4VM
30	TDA4VM: Why does my board enter an abort state after running my application for a long time?	https://e2e.ti.com/f/791/t/1090755	C7x, Debug	TDA4VM
31	TDA4VM: Enabling POK Modules	https://e2e.ti.com/f/791/t/1090769	POK	TDA4VM
32	66AK2H14: UART ARM PROJECT	https://e2e.ti.com/f/791/t/1091537	Getting started	Keystone 1/2 devices
33	TDA4VM: Switch the DSS configuration from a configuration file between 720p and 1080p	https://e2e.ti.com/f/791/t/1092560	DSS	TDA4VM
34	TDA4VM: PVRTune does not work with PSDK 8.x, how can I fix this?	https://e2e.ti.com/f/791/t/1094790	GPU	TDA4VM
35	TDA4VM: How do I update the GPU driver to a newer version?	https://e2e.ti.com/f/791/t/1094811	GPU	TDA4VM
36	TDA4VM: Is Fast Mode Plus supported?	https://e2e.ti.com/f/791/t/1095190	I2C	TDA4Vm
37	66AK2E05: How to calculate the "DDR3 Interface – Registers" for Keystone II devices and Test/Debug on Keystone II EVM	https://e2e.ti.com/f/791/t/1096375	Getting started	Keystone 1/2 devices
38	PRU: How do I calculate read and write latencies?	https://e2e.ti.com/f/791/t/1096933	PRU ICSSG	AM57, AM65
39	[FAQ] TDA4VM: Reduce the DRAM (DDR) memory of Linux to 1GB	https://e2e.ti.com/f/791/t/1097117	U-Boot	TDA4VM
40	Yocto: Building the Linux SDK results in do_package failures for Linux Kernel and U-Boot	https://e2e.ti.com/f/791/t/1097720	Yocto	TDA4VM, DRA821
41	TMS320C6657: GPIO	https://e2e.ti.com/f/791/t/1098858	Getting started	Keystone 1/2 devices
42	TDA4VM/VL: How to allocate UDMA channels and other resources using SysConfig?	https://e2e.ti.com/f/791/t/1097038	UDMA & Resource Allocation	TDA4VM/VL
43	TMS320C6657: How to solve the CSL errors in the Platform test example of PDK in processor SDK 6.3 ?	https://e2e.ti.com/f/791/t/1103564	Getting started	Keystone 1/2 devices
44	TMS320C6657: How to solve the Cerrno Error in the Platform test example of PDK in processor SDK 6.3 ?	https://e2e.ti.com/f/791/t/1103682	Getting started	Keystone 1/2 devices
45	TDA4VM: How to add support for new Flash Device in RTOS SDK	https://e2e.ti.com/f/791/t/1104992	Flash, Board	TDA4VM
46	66AK2E05: How to build u-boot for K2E ? from the package "PROCESSOR-SDK-LINUX-K2E"	https://e2e.ti.com/f/791/t/1106109	Getting started	Keystone 1/2 devices
47	66AK2E05: How to flash the u-boot into SPI of K2E using PROCESSOR-SDK-LINUX-K2E	https://e2e.ti.com/f/791/t/1106187	Getting started	Keystone 1/2 devices
48	TDA4VM: SDK8.02/8.01: Keywriter build failure	https://e2e.ti.com/f/791/t/1107009	Keywriter	TDA4VM
49	TMS320C6657: How to wake the second core by the first core in C6657 ? What is Boot-magic Address / Jump boot address ?	https://e2e.ti.com/f/791/t/1107106	Getting started	Keystone 1/2 devices
50	TMS320C6657: NIMU EMAC example for C665x processor from TI-RTOS SDK	https://e2e.ti.com/f/791/t/1107360	Getting started	Keystone 1/2 devices
51	PROCESSOR-SDK-TDAX: How to capture embedded metadata with the data type 0x12 using CSIRX?	https://e2e.ti.com/f/791/t/1107616	CSIRX	TDA4x
52	PROCESSOR-SDK-J721E: How to enable multiple displays by sending bigger size frames from DSS?	https://e2e.ti.com/f/791/t/1107628	DSS	TDA4x
53	66AK2E05: How to build Linux for K2E ? from the package "PROCESSOR-SDK-LINUX-K2E"	https://e2e.ti.com/f/791/t/1107923	Getting started	Keystone 1/2 devices
54	66AK2H12: NIMU EMAC example client for K2H family devices (66AK2H06, 66AK2H12, 66AK2H14 and K2H EVM)	https://e2e.ti.com/f/791/t/1108274	Getting started	Keystone 1/2 devices
55	66AK2E05: NIMU EMAC Client example on TI-RTOS SDK for K2E family (66AK2E05,66AK202,EVMK2E and EVMK2EX)	https://e2e.ti.com/f/791/t/1108596	Getting started	Keystone 1/2 devices
56	66AK2E05: How to boot Linux on K2E using NFS from the package "PROCESSOR-SDK-LINUX-K2E" ?	https://e2e.ti.com/f/791/t/1108630	Getting started	Keystone 1/2 devices
57	66AK2E05: TSIP on K2E DSP	https://e2e.ti.com/f/791/t/1109628	Getting started	Keystone 1/2 devices
58	TDA4VM: How to boot using WKUP UART?	https://e2e.ti.com/f/791/t/1109996	UART Boot	TDA4x
59	66AK2E05: DHCP configuration for K2E and K2H family	https://e2e.ti.com/f/791/t/1109999	Getting started	Keystone 1/2 devices
60	66AK2E05: UART Example project for K2E family devices	https://e2e.ti.com/f/791/t/1110355	Getting started	Keystone 1/2 devices
61	TDA4VM: How to optimize surround view use case to 2-3 Seconds from power on	https://e2e.ti.com/f/791/t/1110814	Early usecases	TDA4VM
62	TMS320C6657: UART Example project for C665x family devices	https://e2e.ti.com/f/791/t/1111360	Getting started	Keystone 1/2 devices
63	TMS320C6678: UART Example project for C667x family devices	https://e2e.ti.com/f/791/t/1111572	Getting started	Keystone 1/2 devices
64	66AK2H12: UART Example project for K2H family devices	https://e2e.ti.com/f/791/t/1111582	Getting started	Keystone 1/2 devices
65	66AK2E05: Would you please provide a "Quick start Guide for K2E - EVM " to enable a quick product development ?	https://e2e.ti.com/f/791/t/1111676	Getting started	Keystone 1/2 devices
66	0TDA4VM: J72E : How to determine if this is a GP or HS device	https://e2e.ti.com/f/791/t/1113128	HS Vs GP identification	TDA4x
67	TDA4: How LDC LUT can be converted from text to binary format and be used in SDK	https://e2e.ti.com/f/791/t/1114821	LDC	TDA4
68	66AK2H12: How to flash the SBL ( Secondary Boot loader ) into NOR and how to flash the application binary into NOR? How to boot the SBL + Application binary?	https://e2e.ti.com/f/791/t/1115226	Getting started	Keystone 1/2 devices
69	TDA4VM: Configuring stack and heap size in FreeRTOS application	https://e2e.ti.com/f/791/t/1115792	Linker & compiler	TDA4VM
70	TDA4VM: How can I configure the Memory Protection Unit (MPU) for the R5F running FreeRTOS and baremetal case?	https://e2e.ti.com/f/791/t/1115797	R5F memory configuration	TDA4VM
71	66AK2H12: EVMK2H U-Boot build	https://e2e.ti.com/f/791/t/1115842	Getting started	Keystone 1/2 devices
72	Compiler Announcement: TI Arm Clang Compiler Tools release version 2.1.0.LTS available	https://e2e.ti.com/f/791/t/1116468	Compiler	TDA4VM
73	66AK2E05: How to run the Security Accelerator example on Arm core 0 on K2E EVM board ?	https://e2e.ti.com/f/791/t/1116802	Getting started	Keystone 1/2 devices
74	TMS320C6678: How to utilize the clock ticks to measure the time taken for the code execution?	https://e2e.ti.com/f/791/t/1117651	Getting started	Keystone 1/2 devices
75	TDA4VM: How to build custom examples	https://e2e.ti.com/f/791/t/1120181	Build	TDA4
76	TDA4VM: TIOVX Optimization Comparison for J721E and J721S2	https://e2e.ti.com/f/791/t/1106172	OpenVX	TDA4VM
77	TDA4VM: Debugging SBL boot in RTOS SDK	https://e2e.ti.com/f/791/t/1121933	SBL	TDA4VM
78	66AK2E05: How to re-solve the build Errors in the Platform test example of PDK in Processor SDK 6.3 for K2E ?	https://e2e.ti.com/f/791/t/1121794	Getting started	Keystone 1/2 devices
79	TDA4VM: Enable Frame freeze detection in DSS	https://e2e.ti.com/f/791/t/1124527	DSS	TDA4VM
80	66AK2H12: U-Boot flash from CCS for K2HK family devices	https://e2e.ti.com/f/791/t/1124646	Getting started	Keystone 1/2 devices
81	66AK2H12: U-Boot flash for K2HK family devices	https://e2e.ti.com/f/791/t/1125007	Getting started	Keystone 1/2 devices
82	TDA4VM: How to test serial UART ports on board?	https://e2e.ti.com/f/791/t/1125980	UART	J72xx
83	CDD_IPC_APP_RP_LINUX does not build on Processor SDK RTOS 8.2 for the core MCU 2_1	https://e2e.ti.com/f/791/t/1125865	CDD IPC	TDA4
84	TDA4VM: Using PDK GPIO driver	https://e2e.ti.com/f/791/t/1126741	GPIO	TDA4
85	66AK2H12: Linux Flashing steps for K2HK family processor	https://e2e.ti.com/f/791/t/1129722	Getting started	Keystone 1/2 devices
86	66AK2H12: Linux build from Processor Linux SDK	https://e2e.ti.com/f/791/t/1129725	Getting started	Keystone 1/2 devices
87	TDA4VM: How to use DRU channels for config data in VISS driver	https://e2e.ti.com/f/791/t/1130443	VISS	TDA4
88	SK-TDA4VM: How do I enable and debug IMX390 + fusion board not working with Edge AI SDK	https://e2e.ti.com/f/791/t/1131299	Getting started	TDA4
89	SK-TDA4VM: How do I use the CAN bus headers on SK-TDA4VM using Edge AI SDK?	https://e2e.ti.com/f/791/t/1132406	CAN	TDA4
90	EVMK2GX: U-boot build steps for K2G	https://e2e.ti.com/f/791/t/1132609	Getting started	Keystone 1/2 devices
91	EVMK2GX: Build Linux for K2G - ARM	https://e2e.ti.com/f/791/t/1132624	Getting started	Keystone 1/2 devices
92	66AK2G12: How to create "Target configuration" and do "Test connection" on 66AK2G12 EVM	https://e2e.ti.com/f/791/t/1132676	Getting started	Keystone 1/2 devices
93	TDA4VM: Best practices for version tracking for TI’s SDK	https://e2e.ti.com/f/791/t/1133505	Getting Started	TDA4
94	EVMK2G: How to run UART Examples for DSP core on K2G EVM	https://e2e.ti.com/f/791/t/1135364	Getting started	Keystone 1/2 devices
95	66AK2H12: Booting Linux on K2H board using NFS	https://e2e.ti.com/f/791/t/1135367	Getting started	Keystone 1/2 devices
96	EVMK2GX: How to generate the CCS PDK examples for K2G processor family?	https://e2e.ti.com/f/791/t/1135633	Getting started	Keystone 1/2 devices
97	EVMK2G: How to run UART Examples for ARM core on K2G EVM	https://e2e.ti.com/f/791/t/1135670	Getting started	Keystone 1/2 devices
98	66AK2G12: How to load and run the gel file on K2G EVM?	https://e2e.ti.com/f/791/t/1136193	Getting started	Keystone 1/2 devices
99	66AK2G12: How to run McBSP loop back test on K2G EVM ?	https://e2e.ti.com/f/791/t/1136199	Getting started	Keystone 1/2 devices
100	66AK2E05: How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2E 6.3 for K2E?	https://e2e.ti.com/f/791/t/1137599	Getting started	Keystone 1/2 devices
101	66AK2H12: How to create "Target configuration" and do "Test connection" on K2H EVM	https://e2e.ti.com/f/791/t/1137984	Getting started	Keystone 1/2 devices
102	TDA4VM: PDK Interrupt registration for R5F using OSAL	https://e2e.ti.com/f/791/t/1158072	PDK	TDA4VM
103	TDA4VH: Reduction in the number of GPIOs from J7ES to J7AHP	https://e2e.ti.com/f/791/t/1160537	GPIOs	TDA4VH
104	TDA4VM: Starting openVX application automatically at Linux boot	https://e2e.ti.com/f/791/t/1165996	systemd service	TDA4VM
105	TDA4VM: How to move to Native Linux Driver on SDK 8.4 for J7 and DRA8 Devices	https://e2e.ti.com/f/791/t/1166334/	Native linux Driver	TDA4VM, TDA4VH, DRA821, Dra829
106	TDA4VM: How to run vision_apps with tisdk-tiny-image	https://e2e.ti.com/f/791/t/1166419/	TinyFS/ Vision_apps	TDA4VM
107	66AK2E05: Flashing UBI Image	https://e2e.ti.com/f/791/t/1166986	Getting started	Keystone 1/2 devices
108	TDA4VM: How to read the DDR frequency from Linux	https://e2e.ti.com/f/791/t/1169373/	DDR Frequency	TDA4VM/J72XX
109	SK-TDA4VM: How to reset the system using main domain watchdog	https://e2e.ti.com/f/791/t/1170965/	Watchdog	TDA4VM-SK
110	TMS320C6657: How to run the direct SPI-BOOT example on TI-C6657-EVM without IBL ?	https://e2e.ti.com/f/791/t/1171336	Getting started	Keystone 1/2 devices
111	TDA4VM: Steps for executing linux DSS on SDK	https://e2e.ti.com/f/791/t/1173507/	Linux Display	TDA4VM
112	TDA4VM: Steps for executing linux CSI on SDK	https://e2e.ti.com/f/791/t/1173511/	CSI linux	TDA4VM
113	TDA4VM: Run Capture - Display usecase on Linux in SDK	https://e2e.ti.com/f/791/t/1173513/	Capture-Display Linux	TDA4VM
114	66AK2E05: How to flash U-Boot and Linux kernel using Shell Scripts in Processor SDK Linux	https://e2e.ti.com/f/791/t/1173917	Getting started	Keystone 1/2 devices
115	TDA4VM: How to browse memory using CCS while running Linux.	https://e2e.ti.com/f/791/t/1175628	CCS Linux	TDA4VM
116	TDA4VM: Is HSFOSC1 external clock required	https://e2e.ti.com/f/791/t/1176475	HFOSC	TDA4VM
117	SK-TDA4VM: How do I connect the external debugger Blackhawk USB560v2 (XDS560v2) USB System Trace to the board?	https://e2e.ti.com/f/791/t/1178240	Getting Started	TDA4VM
118	66AK2H12: How to flash U-Boot and Linux kernel using Shell Scripts in Processor SDK Linux	https://e2e.ti.com/f/791/t/1178305	Getting started	Keystone 1/2 devices
119	66AK2H12: How to build and run the platform test on K2H EVM ?	https://e2e.ti.com/f/791/t/1180070	Getting started	Keystone 1/2 devices
120	66AK2E05: How to build and run the platform test on K2E EVM ?	https://e2e.ti.com/f/791/t/1180154	Getting started	Keystone 1/2 devices
121	TMS320C6678: How to build and run the IPC-SRIO example on C6678 EVM?	https://e2e.ti.com/f/791/t/1180856	Getting started	Keystone 1/2 devices
122	OSPI FAQ for K3 devices (Sitara/Jacinto)	https://e2e.ti.com/f/791/t/1181116	OSPI Flash	TDA4VM, DRA821
123	EVMK2GX: How to build, run and test the EMAC example on DSP core of K2G family processor	https://e2e.ti.com/f/791/t/1181262	Getting started	Keystone 1/2 devices

2021 FAQs
#	FAQ Title	E2E link	Domain	SoC
1	PC emulation mode failing for TIDL apps	https://e2e.ti.com/f/791/t/970994	PC Emulation	TDA4
2	DRA71XEVM: RTSP streaming in DRA7xx for the 4.19 Kernel	https://e2e.ti.com/f/791/t/985736	GST	DRA7xx
3	Am6548: Linux SDK 7.1 fails to boot on PG 1.0 boards	https://e2e.ti.com/f/791/t/972828	PSDKLA 7.1 Boot	AM654 PG 1.0
4	AM6548: How to add more features to R5 SPL(tiboot3.bin) adhering to maximum size constraint	https://e2e.ti.com/f/791/t/979713	u-boot/SPL	TDA4/AM6548
5	TDA4VM: Linux DTS DTB FAQs	e2e.ti.com/.../979569	Linux/DTS/DTB	TDA4/AM6/TDA2/AM57
6	TDA4VM: OSPI0: Boot hang at A72 SPL with OSPI boot	https://e2e.ti.com/f/791/t/979967	Linux/Boot/OSPI	TDA4
7	[FAQ] TDA4VM: DRA829V: J721E: How to enable EHRPWM on J7 EVM using Linux	e2e.ti.com/.../982074	Linux/EHRPWM	TDA4/J721e/DRA8
8	DRA722: Steps to add EMMC early boot support in vision SDK 3.8 or PSDKLA 6	https://e2e.ti.com/f/791/t/982181	Vision SDK/PSDKLA/Linux	DRA7xx
9	DRA722: Steps to add QSPI early boot support in vision SDK 3.8 or PSDKLA 6	https://e2e.ti.com/f/791/t/982196	Vision SDK/PSDKLA/Linux	DRA7xx
10	TDA4VM: How to enable NFS boot?	https://e2e.ti.com/f/791/t/984034	PSDKRA/NFS	TDA4VM
11	AM654: How to configure 1GB DDR in u-boot?	https://e2e.ti.com/f/791/t/984296	PSDKLA DDR	AM6548
12	DRA821U: 5 port switch working with linux	https://e2e.ti.com/f/791/t/983372	EthFW/CPSW	DRA821/DRA829
13	How to change i2c instance for camera in vision apps?	https://e2e.ti.com/f/791/t/986493	I2C/Camera	TDA4/J721e/DRA8
14	J721e/J7200: How to change console to mcu_uart0	https://e2e.ti.com/f/791/t/988278	Console/UART	TDA4/J721e/DRA829, J7200/DRA821
15	Build and Run drv/DSS example using SBL flow and using SPL flow	https://e2e.ti.com/f/791/t/989328	DSS/SBL	TDA4
16	Does AM65 support Ethernet Switch on Linux/RTOS	https://e2e.ti.com/f/791/t/990441	ICSSG Switch	AM65
17	Changing the UART port for EthFW	https://e2e.ti.com/f/791/t/970699	EthFW	TDA4
18	TSN support on CPSW	https://e2e.ti.com/f/791/t/976842	CPSW	TDA4
19	How to ensure that dependent module drivers are probed before depending driver	https://e2e.ti.com/f/791/t/994670	Generic Linux driver probing - taking care of dependency	TDA4/TDA2/AM5/AM6
20	TDA4VM: OSPI boot: TISCI config ring fail error with SDK 7.3	https://e2e.ti.com/f/791/t/995032	OSPI Booyt TDA4VM	TDA4/J721e/J7200
21	PROCESSOR-SDK-TDAX: The PTK demos are failing in the Processor SDK 7.3	https://e2e.ti.com/f/791/t/995555	PTK Demo	TDA4
22	DRA821U: How to change the frequency of A72 and R5F cores and disable one A72 core	https://e2e.ti.com/f/791/t/997678	Bootloader	DRA821/DRA892
23	How to configure ENET LLD and EthFW (CPSW) for MAC 2 MAC	https://e2e.ti.com/f/791/t/998242	Ethernet FW	DRA821/DRA829
24	Status of ICSSG on Jacinto devices	https://e2e.ti.com/f/791/t/998593	ICSSG	DRA821/DRA829
25	Building, linking and running PDK libraries, applications	https://e2e.ti.com/f/791/t/998713	PDK	DRA821/DRA829/AM65/AM57
26	How to disable unused ARM cores?	https://e2e.ti.com/f/791/t/996960	Linux	AM65
27	TDA4VM: How to view CPU and Memory Usage in QNX	https://e2e.ti.com/f/791/t/1000001	QNX	TDA2/3/4, DRA7/8
28	TDA4VM: QNX eMMC boot using SPL / Uboot	https://e2e.ti.com/f/791/t/1000519	QNX eMMC	TDA2/3/4, DRA7/8
29	AM57xx: Steps to modify DDR/RAM configurations for Custom boards.	https://e2e.ti.com/f/791/t/1000823	DDR	AM57xx
30	How to move function/API to specific section in RTOS?	https://e2e.ti.com/f/791/t/1001673	SYSBIOS	TDA4x
31	Modification of board library for customize Pinmux	https://e2e.ti.com/f/791/t/1003411	Customer Board, PinMux	TDA4x
32	How to change peripheral initialization from remote core firmware using board library?	https://e2e.ti.com/f/791/t/1003416	Board lib	TDA4x
33	Resolve conflict in resource access between remote core firmware and Linux	https://e2e.ti.com/f/791/t/1003415	Customer Board, Integrated use-case, AutoSAR	TDA4x
34	How to debug remote core firmware loaded from u-boot/SPL using CCS	https://e2e.ti.com/f/791/t/1003421	Integrated use-case	TDA4x
35	How to enable power for a module (CAN, ADC, etc..) from remote core firmware	https://e2e.ti.com/f/791/t/1003426	Sciclient, Integrated usecase	TDA4x
36	UNIFLASH error while flashing	https://e2e.ti.com/f/791/t/1003418	UNIFLASH	TDA4x
37	MCUSW demo on CAN along side Linux on A72	https://e2e.ti.com/f/791/t/1003429	CAN, Integrated usecase	TDA4x
38	TDA4VM: Detailed Step for UART boot	https://e2e.ti.com/f/791/t/1003471	UART Boot, U-boot	TDA4x
39	TDA4VM: TDA4VM/DRA829V: routing PCIE reference clock externally	https://e2e.ti.com/f/791/t/1004565	PCIe	TDA4x
40	PROCESSOR-SDK-AM57X: How to boot from QSPI flash on AM57x	https://e2e.ti.com/f/791/t/1005148	Boot, QSPI	AM57
41	TCP/UDP support on J7 devices	https://e2e.ti.com/f/791/t/1005255	TCP/UDP on J7	DRA821/DRA829
42	Unable to see CPSW 5G/9G interface on J7 devices	https://e2e.ti.com/f/791/t/1008719	CPSW nG	DRA821/DRA829
43	AM6548: Under linux, how to configure the device tree to enable the DPI display interface output of the am6548 chip	https://e2e.ti.com/f/791/t/984666	PCIe	AM65
44	How to capture different types/formats of camera from the single CSIRX port ?	https://e2e.ti.com/f/791/t/1008936	CSIRX	J721E
45	TDA4VM: Cddipc between mcu1_0(mcusw) and mcu2_1(vision_apps) based on SDK v7.3	https://e2e.ti.com/f/791/t/1008492	CDD IPC	TDA4x
46	TDA4VM: Cddipc between mcu1_0(mcusw) and mcu2_1(mcusw) based on SDK v7.3	https://e2e.ti.com/f/791/t/1008498	CDD IPC	TDA4x
47	DRA821U: change app_remoteswitchcfg_server log UART port	https://e2e.ti.com/f/791/t/1010150	EthFW	J7200
48	J7200XSOMXEVM: How to use the QSGMII expansion board with DRA821 SDK V7.3	https://e2e.ti.com/f/791/t/1010499	Ethernet	J7200
49	Support for Panning and Zoom in the display node of OpenVX	https://e2e.ti.com/f/791/t/1009550	Display	J721E
50	TDA4VM: how to load MAIN core images from eMMC with boot_app	https://e2e.ti.com/f/791/t/1010965	Boot app	TDA4x
51	CPSW 5G/9G ALE User Guide	https://e2e.ti.com/f/791/t/1011237	CPSW nG	DRA821/DRA829
52	TDA4VM: Resource table for IPC	https://e2e.ti.com/f/791/t/1012138	IPC resource table	TDA4VM/DRA821
53	AM57xx-IDK: eMMC booting	https://e2e.ti.com/f/791/t/997276	Boot	AM57xx
54	How to enable RGMII on DRA821	https://e2e.ti.com/f/791/t/1013590	CPSW 5G	DRA821
55	TDA4VM: NVME SSD initialization & commands	https://e2e.ti.com/f/791/t/1014951	NVME SSD	DRA829/J721e/TDA4VM
56	TDA4VM: IPC_Test on PSDK QNX 7.2 / PSDK QNX 7.3	https://e2e.ti.com/f/791/t/1015234	IPC	TDA4VM
57	PROCESSOR-SDK-J7200: how to use SBL and boot system with rootfs on eMMC	https://e2e.ti.com/f/791/t/1015344	SBL	J7VCL
58	Supporting more than 32bit timestamp in the capture node	https://e2e.ti.com/f/791/t/1016702	Capture Node	TDA4x
59	How to enable lockstep for mcu_r5f in SPL and SBL?	https://e2e.ti.com/f/791/t/1008069	R5F	TDA4x
60	Enabling support for more than 1920 input resolution in Display	https://e2e.ti.com/f/791/t/1016669	Display	TDA4x
61	TDA4VM: How to configure 4266MTS DDR on 7.2 SDK	https://e2e.ti.com/f/791/t/1016097	DDR Frequency	TDA4VM
62	TDA4VM: How to request an EB Tresos license for MCUSW/MCAL	https://e2e.ti.com/f/791/t/1018683	MCUSW	TDA4VM, DRA821
63	How to change lane speed and number of lanes for DSI output?	https://e2e.ti.com/f/791/t/1019565	DSI Display	TDA4xVM
64	AM5729: Wrong address in AM572x_pad_config.gel for SYSCFG_PAD_I2C1_SDA/SCL	https://e2e.ti.com/f/791/t/1019906	Boot	AM57
65	Can CPSW 5G/9G be enabled under Uboot	https://e2e.ti.com/f/791/t/1020853	CPSW 5G/9G, Uboot	TDA4VM, DRA821
66	PROCESSOR-SDK-AM65X: How to boot using UART on AM65X?	https://e2e.ti.com/f/791/t/1021784	Boot	AM65
67	How to use DSS M2M for format conversion?	https://e2e.ti.com/f/791/t/1007456	DSS	TDA4x
68	AM57X: How to create CCS projects provided by SDK for CUSTOMBOARD.	https://e2e.ti.com/f/791/t/1024461	CCS, PDK	AM57
69	AM57X: UNIFLASH sequence for different QSPI part number?	https://e2e.ti.com/f/791/t/1025270	Uniflash, QSPI	AM57
70	TDA4VM: How to boot from QSPI?	https://e2e.ti.com/f/791/t/1025985	QSPI Boot - U-boot	TDA4
71	TDA4VM: PSDK QNX : Modifying ARM SCR_EL3 EA Bit	https://e2e.ti.com/f/791/t/1026657	Boot, QNX	TDA4
72	How to update Boot binaries SD card on the fly using UART	https://e2e.ti.com/f/791/t/1026741	SD card updation	TDA4/AM5/AM6
73	TDA4VM: The windows DFU tool and driver for TDA4	https://e2e.ti.com/f/791/t/1025354	Flashing	TDA4/DRA821/DRA829
74	TDA4VM: On 7.3 SDK how to reduce DDR speed to 3733 MTS	https://e2e.ti.com/f/791/t/1028163	DDR Speed	TDA4
75	DRA821U: DRA829 : Guide to Do Board specific modifications for CPSW 5G/9G	https://e2e.ti.com/f/791/t/1030243	CPSW 5G/9G, Board Configuration	TDA4x, DRA821
76	TDA4VM: U-Boot Changes in SDK 8.0 Vs 7.3	https://e2e.ti.com/f/791/t/1031148	U-Boot changes in SDK 8.0	TDA4VM
77	How to provide different set of parameters in replicated node, like two look up table for LDC module	https://e2e.ti.com/f/791/t/1032039	OpenVX	TDA4VM
78	AM6548: CTRLMMR_WKUP_JTAGID register value for SR2.1	https://e2e.ti.com/f/791/t/1032107	JTAG	AM65
79	How to move DMPAC to mcu2_0 core?	https://e2e.ti.com/f/791/t/1035632	DMPAC	TDA4VM
80	eDP firmware responds wrongly to some messages and thus causes display incompatibility.	https://e2e.ti.com/f/791/t/1031275	Display	TDA4VM
81	66AK2E05: How to generate the CCS PDK examples for K2E?	https://e2e.ti.com/f/791/t/1040858	PDK	Keystone 1/2 devices
82	TMS320C6657: How to generate the CCS PDK examples for C6657?	https://e2e.ti.com/f/791/t/1040872	PDK	Keystone 1/2 devices
83	TDA4VM: J721e/J7200: Enabling DFU Boot on 8.0 Linux SDK	https://e2e.ti.com/f/791/t/1041155	DFU	J7200/J721e
84	AM5748: AM57XX: MPU COUNTER_REALTIME saturates after several hundred days	https://e2e.ti.com/f/791/t/1041234	i940 errata workaround implementation	AM57xx
85	PRU_ICSSG: How to check and set PRU Core Frequency in CCS?	https://e2e.ti.com/f/791/t/1041347	PRU, ICSSG	AM65
86	TDA2PXEVM: How to create a mesh LUT for TDA2P/TDA3 LDC	https://e2e.ti.com/f/791/t/1042074	LDC	TDA2P
87	TMS320C6657: How to run the OOB demo on C6657 EVM? and What does the OOB demo constitutes?	https://e2e.ti.com/f/791/t/1041989	PDK	Keystone 1/2 devices
88	List of SDK available for the Keystone-I and II devices	https://e2e.ti.com/f/791/t/1041987	SDK	Keystone 1/2 devices
89	PROCESSOR-SDK-C665X: How to update the firmware of the inbuilt-XDS emulator on C6657 EVM?	https://e2e.ti.com/f/791/t/1048033	CCS, Getting started	Keystone 1/2 devices
90	PROCESSOR-SDK-C665X: How to re-build the PDK and SDK of PROCESSOR-SDK-C665X 6.3 for C6657?	https://e2e.ti.com/f/791/t/1048039	SDK, Getting started	Keystone 1/2 devices
91	TDA4VM: Is there a custom board bring up guide?	https://e2e.ti.com/f/791/t/1047411	Board bring up guide	TDA4/J721e/J7ES
92	PROCESSOR-SDK-K2E: Rootfs Image creation	https://e2e.ti.com/f/791/t/1048639	SDK, Getting started	Keystone 1/2 devices
93	PROCESSOR-SDK-C665X: IBL Build Steps on Windows 10	https://e2e.ti.com/f/791/t/1048640	SDK, Getting started	Keystone 1/2 devices
94	PROCESSOR-SDK-C665X: IBL Build Steps on Linux (Ubuntu)	https://e2e.ti.com/f/791/t/1048641	SDK, Getting started	Keystone 1/2 devices
95	TDA4VM: How to change Linux kernel page size from default 64K in the SDK to 4K?	https://e2e.ti.com/f/791/t/1035291	Linux kernel page size change	TDA4/J721e/J7200
96	TDA4VM: Running Gateway Demo	https://e2e.ti.com/f/791/t/1050416	Gateway-demos, CCS	TDA4VM
97	SK-TDA4VM: Can somebody provide the PCB schematics and layout from sprr438 in Altium format?	https://e2e.ti.com/f/791/t/1050931	SK, EVM	TDA4-SK
98	TMS320C6678: TSIP on C667x device	https://e2e.ti.com/f/791/t/1057046	SDK, Getting started	Keystone 1/2 devices
99	TMS320C6657: How to build and run the IPC example on C6657 EVM?	https://e2e.ti.com/f/791/t/1057447	SDK, Getting started	Keystone 1/2 devices
100	TMS320C6657: How to flash the IBL ( Intermediate Boot loader ) into EEPROM and how to flash the application binary into NOR? How to boot the IBL + Application binary?	https://e2e.ti.com/f/791/t/1057566	SDK, Getting started	Keystone 1/2 devices
101	66AK2E05: How to run the UART example on the K2E EVM ( ARM core )	https://e2e.ti.com/f/791/t/1058020	SDK, Getting started	Keystone 1/2 devices
102	66AK2E05: How to run the GPIO-LED example on the K2E EVM ( ARM core ) ?	https://e2e.ti.com/f/791/t/1058015	SDK, Getting started	Keystone 1/2 devices
103	PROCESSOR-SDK-TDAX: Flip/Mirror support in the display node	https://e2e.ti.com/f/791/t/1058318	DSS	TDA4x
104	C665x, C667x, K2E and K2H: IPC build in RTOS Processor SDK	https://e2e.ti.com/f/791/t/1058830	SDK, Getting started	Keystone 1/2 devices
105	TDA4VM: How to test GPIO Interrupts	https://e2e.ti.com/f/791/t/1058595	GPIO	TDA4/J721e/J7VCL/J7AEP
106	TDA4VM: How to enable Inline ECC for > 2G	https://e2e.ti.com/f/791/t/1058618	DDR	TDA4
107	TDA4VM: How to remove codec dependency in Vision Apps	https://e2e.ti.com/f/791/t/1029556	PDK	TDA4x
108	TDA4VM: How to create a LDC mesh LUT for fisheye distortion correction on TDA4?	https://e2e.ti.com/f/791/t/1058565	LDC	TDA4x
109	TDA4VM: How to read on-die temperatures on J7 family of SoCs using Linux	https://e2e.ti.com/f/791/t/1060764	Linux /VTM/Temperature	J7 Family - TDA4VM/J721e/J7200
110	TDA4VM: HS: Building & booting on HS devices on latest Linux SDK	https://e2e.ti.com/f/791/t/1061584	Linux, HS	J7 Family
111	TDA4VM: GPIO+DMA Trigger in TDA4 and test in SDK7.1	https://e2e.ti.com/f/791/t/1061801	GPIO +DMA TDA4	TDA4vx
112	TMS320C6678: How to run NIMU-EMAC client example on C6678 EVM	https://e2e.ti.com/f/791/t/1062580	NIMU EMAC	Keystone 1/2 devices
113	TMS320C6678: How to create "Target configuration" and do "Test connection" on C6678 EVM	https://e2e.ti.com/f/791/t/1062584	Getting started	Keystone 1/2 devices
114	TMS320C6678: How to load and run the gel file on C6678 EVM?	https://e2e.ti.com/f/791/t/1062598	Getting started	Keystone 1/2 devices
115	TDA4VM: Porting a PDK Driver to an AUTOSAR Environment	https://e2e.ti.com/f/791/t/1062771	AutoSAR, PDK	TDA4
116	TMS320C6657: How to create "Target configuration" and do "Test connection" on C6657 EVM	https://e2e.ti.com/f/791/t/1064425	Getting started	Keystone 1/2 devices
117	TMS320C6657: How to load and run the DSP gel file on C6657 EVM	https://e2e.ti.com/f/791/t/1064429	Getting started	Keystone 1/2 devices
118	66AK2E05: How to create "Target configuration" and do "Test connection" on K2E EVM.	https://e2e.ti.com/f/791/t/1064431	Getting started	Keystone 1/2 devices
119	66AK2E05: How to load and run the ARM gel file on K2E EVM	https://e2e.ti.com/f/791/t/1064437	Getting started	Keystone 1/2 devices
120	66AK2E05: How to load and run the DSP gel file on K2E EVM	https://e2e.ti.com/f/791/t/1064433	Getting started	Keystone 1/2 devices
121	TDA4VM: Not able to receive messages for a particular CAN ID, how to debug?	https://e2e.ti.com/f/791/t/1065173	CAN	TDA4
122	Large size of tispl.bin after integrating DM firmware	https://e2e.ti.com/f/791/t/1065187	u-boot, DM firmware	TDA4

2020 FAQs
1	TDA4VM: Different ways to load an RTOS or Baremetal application along with Linux	https://e2e.ti.com/f/791/t/915474	R5 Firmware, Integrated usecase	TDA4
2	TDA4VM: makefile based project which shows A72, C7x, R5F setup along with IPC and buffer passing between Linux+RTOS	https://e2e.ti.com/f/791/t/909695	IPC, Vision Apps	TDA4
3	TDA4VM: How do I reduce the size of the Yocto filesystem to meet my needs	https://e2e.ti.com/f/791/t/915887	Yocto	TDA4
4	TDA4VM/DRA829/AM65xx: Linux: Configuring GPIOs	https://e2e.ti.com/f/791/t/918654	GPIO, Linux	TDA4
5	TDA4VM: CAN: How is bit-rate calculated for CAN	https://e2e.ti.com/f/791/t/920090	CAN, AUTOSAR	TDA4
6	TDA4VM: How can I use CAN on Linux	https://e2e.ti.com/f/791/t/922168	CAN, Linux	TDA4
7	TDA4VM: Routing interrupts via the interrupt router	e2e.ti.com/.../931985	Interrupt routers	TDA4
8	TDA4VM: How to debug from Linux command line	https://e2e.ti.com/f/791/t/935342	Debug	TDA4
9	DRA829V/TDA4VM: How can I check if cache is enabled or not for R5F	https://e2e.ti.com/f/791/t/949471	Cache, R5F	TDA4
10	TDA4VM: How to check if R5F is in lock-step or split mode	https://e2e.ti.com/f/791/t/966564	R5F	TDA4
11	TDA4VM: How can I load remote core firmware from OSPI	https://e2e.ti.com/f/791/t/950919	R5 Firmware, OSPI	TDA4
12	TDA4VM: How to modify offsets for boot binaries in eMMC	https://e2e.ti.com/f/791/t/950948	eMMC, u-boot	TDA4
13	TDA4VM: How can I confirm primary and secondary boot mode on custom board	https://e2e.ti.com/f/791/t/950946	Bootmodes	TDA4
14	TDA4VM: Application in the PSDKRA runs standalone from SBL but doesn't run alongside Linux	https://e2e.ti.com/f/791/t/931992	Integrated usecase	TDA4
15	TDA4VM: How to load firmware using R5 SPL from eMMC	https://e2e.ti.com/f/791/t/944099	R5 Firmware	TDA4
16	TDA4VM: How to read on-die temperature?	https://e2e.ti.com/f/791/t/922224	PSDKRA, Thermal support	TDA4
17	J6:TDA2x: How to read on-die temperature?	https://e2e.ti.com/f/791/t/932988	Vision SDK, Thermal	TDA2
18	TDA4VM: Pinmux Guide for Jacinto Processors	https://e2e.ti.com/f/791/t/927526	PSDKLA/PSDKRA - Pinmux	TDA4
19	TDA4VM: How to view c6x trace buffer from Linux?	https://e2e.ti.com/f/791/t/931381	PSDKLA/PSDKRA	TDA4
20	TDA4VM: Custom TDA4VM Boot stuck at A72 SPL: "spl: mmc init failed with error: - 110"	https://e2e.ti.com/f/791/t/943299	PSDKLA - Boot	TDA4
21	TDA4VM: How to use SPI/SPI_DEV on TDA4/J721E?	https://e2e.ti.com/f/791/t/947437	PSDKLA SPI	TDA4
22	TDA4: How to boot to u-boot using eMMC	https://e2e.ti.com/f/791/t/886980	PSDKLA u-boot	TDA4
23	TDA4: How do I determine the GPIO number within linux for a pin within the schematic?	https://e2e.ti.com/f/791/t/948888	PSDKLA/RA Linux	TDA4
24	AM57xx-IDK Supported boot modes	https://e2e.ti.com/f/791/t/959283	AM57xx LInux SDK/ Boot	AM57
25	TDA4VM: How to enable RTC on Jacinto TDA4x EVM?	https://e2e.ti.com/f/791/t/959163	TDA4/RTC	TDA4
26	Firewalls in TDA4 (udb0393778.dhcp.ti.com/.../, TIFS - Firewall Module - v6.pptx)	https://software-dl.ti.com/tisci/esd/latest/6_topic_user_guides/firewall_faq.html	Firewalls
27	PROCESSOR-SDK-DRA8X-TDA4X: How to use eMMC based filesystem on PSDKQA release?	https://e2e.ti.com/f/791/t/922567	QNX, eMMC	TDA4
28	TDA4VM: How to do a run time logging of events in an OpenVX application?	https://e2e.ti.com/f/791/t/930770	Performace	TDA4
29	PROCESSOR-SDK-DRA8X-TDA4X: Multi channel processing in OpenVX	https://e2e.ti.com/f/791/t/920477	OpenVx	TDA4
30	TMDX654GPEVM: mksdboot.sh of PROCESSOR-SDK-LINUX-AM65X 07_00_00_08 doesn't work	https://e2e.ti.com/f/791/t/923047	SDK (AM65)	AM65
31	Yocto build error for recipe iso-codes in PSDKLA_07.00.00.04	https://e2e.ti.com/f/791/t/924508	Yocto	TDA4
32	PROCESSOR-SDK-DRA8X-TDA4X: OpenVX application hangs with pipelining	https://e2e.ti.com/f/791/t/924559	OpenVx	TDA4
33	TDA4VM: How to get CPSW9G virtual interface functional on TDA4x/DRA8x SDK versions 7.0 onward?	https://e2e.ti.com/f/791/t/929577	CPSW9G	TDA4
34	DRA829VXEVM: Is it possible to connect two DRA829 EVMs via SGMII	https://e2e.ti.com/f/791/t/936840	SGMII	TDA4
35	DRA829V: How do I find documentation for Linux Kernel device tree files	https://e2e.ti.com/f/791/t/937619	Platform (Linux)	TDA4
36	TDA2x: How To – Modify 512MB Bios Memory map to 1GB Bios Memory map in vision SDK?	https://e2e.ti.com/f/791/t/930225	Vision SDK	TDA2
37	TDA2x: How can I set the IPU1_0 as the Primary core in Vision SDK?	https://e2e.ti.com/f/791/t/929873	Vision SDK	TDA2
38	TDA2x: Multi channel support for NullSrc link running on A15 Linux in vision SDK	https://e2e.ti.com/f/791/t/930379	Vision SDK	TDA2
39	TDA2x: How to flash images to the QSPI memory from the u-boot prompt in vision SDK Linux?	https://e2e.ti.com/f/791/t/931314	Vision SDK, QSPI	TDA2
40	TDA2x: What are the steps to create our own custom usecase containing custom Algorithm plugin in Vision SDK bios?	https://e2e.ti.com/f/791/t/932998	Vision SDK	TDA2
41	TDA2E: How to do profiling in the Vision SDK	https://e2e.ti.com/f/791/t/942557	Vision SDK	TDA2
42	TDA2E: How to link the static library in the Vision SDK bios	https://e2e.ti.com/f/791/t/942575	Vision SDK	TDA2
43	TDA2E: Failed to request_mem_region(0xa9000000, 0x4000000) in Vision SDK	https://e2e.ti.com/f/791/t/942639	Vision SDK	TDA2
44	How to detect erroneous input frame in VIP?	https://e2e.ti.com/f/791/t/931974	VIP	TDA4
45	How to run multi-cam usecase for YUV sensors?	https://e2e.ti.com/f/791/t/931988	Multi-cam, YUV	TDA4
46	How to configure DSS for BT656 or BT1120 output format?	https://e2e.ti.com/f/791/t/931993	DSS, BT656, BT1120	TDA4
47	How to connect CAL to VIP on TDA2Px?	https://e2e.ti.com/f/791/t/932390	CAL, VIP	TDA2
48	TDA4VM: how to configure C7x DSP frequency to match different TDA4VM variant	https://e2e.ti.com/f/791/t/928867	Board	TDA4
49	PROCESSOR-SDK-DRA8X-TDA4X: How to use IPC Example Application Echo Test on PSDKQA7.0	https://e2e.ti.com/f/791/t/932825	IPC, QNX	TDA4
50	PROCESSOR-SDK-DRA8X-TDA4X: Ethernet LLD replacing CPSW LLD	https://e2e.ti.com/f/791/t/935547	CPSW, Ethernet	TDA4
51	PROCESSOR-SDK-AM65X: [FAQ] PROCESSOR-SDK-AM65x: Ethernet LLD replacing EMAC LLD	https://e2e.ti.com/f/791/t/935569	CPSW, Ethernet	AM65
52	How to flash OSPI using CCS & JTAG interface	https://e2e.ti.com/f/791/t/942139	OSPI Flashing	TDA4
53	How to change display resolution in vision apps	https://e2e.ti.com/f/791/t/942679	Display	TDA4
54	Getting traces on Lauterbach using DCC	https://e2e.ti.com/f/791/t/949218	Lauterbach/DCC	TDA4
55	Is there a guide to choosing the right OSPI Flash parts that are supported on Jacinto 7?	https://e2e.ti.com/f/791/t/946418	OSPI	TDA4
56	How to add new memory section in vision apps	https://e2e.ti.com/f/791/t/943406	Vision Apps	TDA4
57	How to enable DMA in OSPI and improve OSPI read performance in SBL and BootApp?	https://e2e.ti.com/f/791/t/946654	OSPI, SBL, BootApp	TDA4
58	TDA2SX: How do I configure the H.264 Encoder Constant Bit Rate (CBR) and Variable Bit Rate (VBR) on IVAHD?	https://e2e.ti.com/f/791/t/948856	Codec	TDA2
59	TDA4VM: How to resolve Yocto build failure while trying to fetch repository?	https://e2e.ti.com/f/791/t/948986	Yocto	TDA4
60	How to flip images on TDA2x/TDA3x/TDA4x?	https://e2e.ti.com/f/791/t/949154	Display	TDA4, TDA3, TDA2
61	How to change output to vout1 in vision apps	https://e2e.ti.com/f/791/t/949461	Display	TDA4
62	Sometime Gstreamer video is not displaying in monitor when I used waylandsink	https://e2e.ti.com/f/791/t/954092	Gstreamer, Display	TDA2
63	Sometime Gstreamer video is not displaying in monitor when I used kmssink	https://e2e.ti.com/f/791/t/954097	Gstreamer, Display	TDA2
64	how to use QT & wayland in VissionApp?	https://e2e.ti.com/f/791/t/950630	Display	TDA4
65	How to enable third display ie TIVX_TARGET_DISPLAY3 in vision apps?	https://e2e.ti.com/f/791/t/954679	Display	TDA4
66	How to build spl, uboot for HS device	https://e2e.ti.com/f/791/t/958666	uboot-spl	TDA4
67	The steps to enable the early-boot late attach use-case in vision SDK 3.7 Linux	https://e2e.ti.com/f/791/t/959989	Vision SDK	TDA2
68	How to determine if IVAHD can be used for a certain resolution and also how many instances can be supported for that resolution?	https://e2e.ti.com/f/791/t/961127	Codec	TDA2x, TDA3x, AM57xx
69	The steps to enable the early-boot late attach use-case in vision SDK 3.8 Linux	https://e2e.ti.com/f/791/t/961647	Vision SDK	TDA2
70	How to build sysfw.itb for HS device	https://e2e.ti.com/f/791/t/963964	sysfw	TDA4

Excel sheet for better searchability - /cfs-file/__key/communityserver-discussions-components-files/791/8357.e2e_2D00_faqs_2D00_apps.xlsx

Last Sync: 27th March, 2025

Processors

Processors forum

[FAQ] TDA4VM: Latest FAQs on TDA4